Download M307 User Manual - Microplex Systems Ltd.

Transcript
1. Overview of the Manual
Contents of the Manual
1
OVERVIEW OF THE MANUAL
This manual describes the installation and configuration of an M307 on your network.
For the latest information on the M307, please see the Technical Support section of
Microplex’s Web site:
http://www.microplex.com
Contents of the Manual
This manual contains the following chapters:
2: Introduction to the M307 Print Server. How the M307 works and its main features.
3: Installing the M307. Installing and connecting the M307 Print Server to a printer and
the network.
4: Configuration Tools. Utilities provided with the M307 Print Server and some basic
TCP/IP commands that you will need to configure the M307.
5: Configuring the M307 on Your Network.
6: Configuring Printers in Windows.
7: Configuring Printers in UNIX. Providing some procedures for specific UNIX
variants and scenarios.
8: Configuring Printers in Mac OS X.
9: Configuring Printers on a Novell Server.
10: Using HTML Pages to Configure the M307. Descriptions of the M307 Web pages
for configuring the Print Server and viewing its status.
11: Reference Information. Provides a complete command list and information about
using the npsh command line interface shell. Describes the M307 naming scheme, how
to reset units to factory defaults, and how to upgrade the firmware.
12: Extra Features/Additional Information. Topics covered include Print Server
architecture, general options, security features, monitoring and logging printer
information, using the FTP daemon to access the M307, and managing with SNMP.
13: M307 Specifications. Providing hardware and software specifications for the
M307, connector pinouts, serial flow control, LED status indicators, and variable
definitions.
8
M307 Installation and Configuration Guide
© Microplex System Ltd., 2010