Download Assist pass.indd

2b.
2b
• angle
2c.
2c
• small side support / large trunk support Alt.1
• large side support / small trunk support Alt.2
G
I
H
Tool: 5 mm Allen Key
TRUNK SUPPORT
The trunk supports can be adjusted in height,depth
and sideways.
1. You adjust their height by first loosening the screws
(G)whilst moving the attachment (H)upwards or
downwards.Re-tighten the screws (G).
2. You adjust the trunk supports sideways by loosening the knob (I), moving the support sideways to
the required position and then re-tightening the
knob (I).
3. To adjust the depth of the trunk supports,first
unzip the trunk support cover to reveal the screws
inside.Unscrew them using a screwdriver, and
move the trunk support forwards or backwards.
Retighten the screws and zip up the cover.
4. Remove the trunk support by loosening knob (I)
and pulling the trunk support sideways and outwards.
Be careful not to trap your arm between
trunksupport and armrest when changing the
angle of the backrest.
24
REA® ASSIST