Download manual - ActiveGPS

Control Calibration
Press
to enter control calibration.
Touch “exit” icon to exit.
The AVN can be controlled by the vehicles multi-function steering wheel (where
fitted) but the AVN controls must be calibrated with the corresponding functions on
the steering wheel.
NOTE: not all vehicle steering wheel controls are compatible with the AVN
To calibrate the steering wheel controls follow these steps:
1. Press ‘Start’
2. Touch any key on the screen to start the test
3. Press the button on the AVN then press the corresponding button on the steering wheel
4. After the AVN has ‘learnt’ the first function you will be prompted to initiate the next function to be programmed. Once all of the
steering wheel functions have been successfully programmed press ‘End’
NOTE: the steering wheel control cable must be connected for this function to operate (see page 6)
Touch Screen Calibration
Occasionally the AVN screen may need calibrating.
To recalibrate the screen press
to enter touch calibration
Press OK to start the calibration then click the ‘+’ on the screen in this order:
2
5
1
3
4
Once calibration has been completed click anywhere on the screen to exit.
Main menu shortcuts
The shortcut menu bar, at the base of the screen, can be customised.
A maximum of seven shortcuts can be displayed on the shortcut menu bar.
Click
to enter the shortcut interface.
To add a shortcut to the menu bar simply click on the icon and drag it on to the
menu bar.
If there are already seven items on the shortcut bar you will need to remove one item before you can add another. To remove a
shortcut just press on the item, you want to remove, in the menu bar and drag the iocn onto the main screen.
Return to contents
AVN S9010/9020
V1V105.15
06/15 UK
AVN9010/20
100 • UK