Download B800 Updated Series Frequency Inverter

B800 Update Version frequency inverter user manual
•F-42 Braking resistor function select
Activate interior brake resistor.
When F-42=1, Brake resistor functions enable.
When F-42=2, Should be overload protection to avoid resistor and drive
damaged
•F-43 Frequency instruction adjustment factor.
Scales the analog input at control terminal 6 up or down, Appear the
correspondence analog input value according to parameter F-09
•F-44 Communication address(Drive address).
0 means order invalid
•F-45 Enter “Extended menu access” code
Define the password for “Extended menu access”(F-15)
•F-46 Parameter access lock
Controls user access to parameters.
When F-46=0, all parameters can be changed and these changes will
be stored automatically. When
When F-46=1, changes may be made, but these will not be stored when
the drive power cut off.
When P-46=2, Parameters are locked and cannot be changed thus
preventing unauthorized access
•F-47 Accumulation running time (Hours run meter)
Read only.
•F-48 PID control samples cycle
- 28 -