Download User Manual - Audio General Inc.

Network Control Software Application
Alert:
Show and setup Alert configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to operate:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3. Select Alert Condition. Multiple choices are fine.
4. Press Submit to confirm.
5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to
see if the attendees can receive the e-mail. If the attendees cannot receive the e-mail, please check if
the setting is correct or not. If you have questions with the Alert Setting, please contact your network
service provider.
ITEM SETTING
Email Setting
To
Cc
Subject
From
SMTP Setting
Server
User Name
Password
Alert Condition
Fan Lock
Over Temperature
Lamp fail
Lamp Time Alert
Lamp Cover Opened
Filter Time Alert
DESCRIPTION
Set up the mail alert attendee (Max length: 40 characters).
Set up the backup mail alert attendee (Max length: 40 characters).
Set up the subject of the alert e-mail (Max length: 40 characters).
Set up the sender e-mail address (Max length: 40 characters).
To enter the SMTP server (Mail server) name of the company or IP
Address (Max length: 40 characters).
Enter the sender‟s e-mail address (Max length: 40 characters).
For example: [email protected]
Enter password of the sender‟s e-mail account (Max length: 15 characters).
The cooling fan is not operating.
The projector internal is over heated.
The lamp does not light up.
Lamp has reached its life time. Suggest changing the lamp.
Lamp Cover does not close well.
Filter has reached its life time. Suggest cleaning the filter.
81