1
Download Tecplot 360 2009 R2 User`s Manual
Transcript
Frames • Value Blanking Constraints - Link all value-blanking attributes. It is not necessary to close and reopen the dialog between frames. Simply select another frame with the dialog open to change the newly active frame. Frame Linking Groups You can segregate frames into groups so that only frames in that group receive changes made in the linked attributes. By default, all frames are added to Group 1. Add a frame to a group by selecting the appropriate group number from the “Frame is a Member of” drop-down menu on the Between Frames page of the Set Links for Active Frame dialog. You can assign frames to groups 1-20. New frames added to a group take on the characteristics of previous members of the group. Figure 2-4. Five frames in two groups with different linking Propagating Between Frame Link Attributes to Other Frames Once link attributes are set in a frame group, you must set these same attributes in other frames for linking to occur. Each frame may have each of the attributes selected or not linked. If you want all or a select group of frames to have the same link attributes, select the appropriate [Apply Settings to All Frames] button to quickly propagate the link settings. Alternatively, you can select each 55
