Download "user manual"

Transcript
Verifying Your Installation
Verifying Your Installation
If you have startup problems, use DEBUG_SLFIND to direct error messages to a file
you choose. To do this, set DEBUG_SLFIND to stdout, stderr, or another file
name.
Rerun the tool. Check for error messages in the file that indicate if a resource file is
missing.
Unaligned access warning messages can be ignored. For example:
Unaligned access pid=31990 <rwbld60> va=0x140553776
pc=0x300000z7410 ra=0x300000z73d0 inst=0xa4d10000
These warning messages can be suppressed on the machine where the messages are
displayed by the command:
$ uac p 0
For more information on unaligned access warnings, refer to the Compaq Tru64
UNIX 4.0D User’s Manual.
Setting Printer Configuration Files
After running the Oracle Installer, set your printer configuration files to prepare
your system for printing by performing the following tasks:
■
Locating and Installing PPD and AFM Files for Your Printers
■
Setting Up the Default Printers
■
Updating the Toolkit Font Mapping File
■
Setting Printer Commands (Optional)
■
Specifying a Default Printer
■
Printing to HP PCL Printers
■
Testing Printing Capabilities and Fixing Errors
Locating and Installing PPD and AFM Files for Your Printers
This task provides instructions for choosing an appropriate PostScript Printer
Definition (PPD) file for your printer. Oracle Toolkit uses the PPD files to determine
which fonts are available on a PostScript printer, since Compaq Tru64 UNIX does
not allow the Toolkit to obtain this information from the printer directly.
4-2
Oracle Forms Developer and Reports Developer Installation Guide