Download User Manual - Innovations Foresight

Three set screws (#4-40), please tighten all
Three set screws (#4-40), please tighten all
ONAG® XT IP set screw locations
ONAG® XT SP set screw locations
The new ONAG XT is equipped, as the ONAG SC, of a guider helical
focuser at the GP.
The image below shows the ONAG XT helical focuser.
ONAG XT guider helical focuser
The helical focuser provides a smooth fine focus capability for the guider.
Each turn (360 degrees) move the focuser by 400 microns (0.4mm).
ONAG® User Manual rev. 5.1
32
2011 © Innovations Foresight, LLC