Download User`s Manual
Transcript
Mini-SMB Trigger Schematic USERS TRIGGER CIRCUIT RG-174 COAX CABLE MINI-SMB TRIGGER INPUT USER TRIGGER (5V TTL DRIVER) IN RG-174 COAX CABLE MINI-SMB SY NC OUT 1 SY NC OUT 1 (5V TTL RECEIVER) OUT The trigger circuit is connected to a Texas Instruments SN74ACT244PWR buffer/driver inside the camera. The required trigger input current is less than 10uA and the maximum sync output current is 24mA. See the Texas Instruments SN74ACT244PWR for more detailed information. Note that the trigger input signal is not terminated to match the cable impedance. GE4900 Technical Manual Page 30