Download Marley Parts Reference Guide - Dyna

Water Distribution
Nozzles
Counterflow Distribution Assembly
n Self
Draining
Economical Installation
n Economical Operation
n Easy disassembly and
Reassembly
n Larger pipe spacing
n Easily adapts to a variety of
nozzle spacings
n
Spray Arm Extender Adapter
EPDM Grommet
Assembly of the entire system
requires only a few simple hand tools.
All connections are positive—yet the
design allows repeated disassembly
and reassembly.
The nozzle outlet is always the lowest
elevation in the distribution system. This
arrangement is self draining when the
supply water is shut off. There are no
special valves to open or close.
Nozzles are installed in pairs—each
supply pipe serving multiple pairs of
nozzles. Multiple nozzle pairs per supply
pipe mean larger pipe spacing and,
therefore, lower installed cost than
most other systems. The adaptor allows
nozzle spacing on 3'-0" centers.
The nozzle assembly is attached to
the header/lateral using a unique
design EPDM grommet that is inserted
into the pipe—the entire assembly is
attached with stainless steel strapping.
9