Download Premium and Atrium using Unity Pro

AS-i bus configuration
How to Declare an AS-i Communication Module in the PLC Rack
Procedure
This operation makes it possible to insert an AS-i communication module in the PLC
rack.
Step
Action
1
Open the hardware configuration editor.
2
Select the slot where you wish to insert the module.
3
Select the command New Device from the contextual menu.
Result: the New Device window appears.
New Device
4
Address:
Part Number
Description
Premium local drop
4
Open up the line Premium local input/output station and the line
Communication by clicking on the + sign.
Result :
New Device
3
Address:
Part Number
Description
Premium local drop
Analog
Communication
5
118
TSX ETY 110
TCP IP ETHWAY MODULE
TSX ETY 120
ETHERNET ETY120 MODULE
TSX ETY 4103
ETHERNET TCP/ IP BASIC WEB SERV
TSX ETY 5103
ETHERNET TCP/ IP CONFIGURABLE
TSX IBX 100
InterBus-S ISA MODULE
TSX IBY 100
InterBus-S MODULE
TSX PBY 100
PROFIBUS-DP MODULE
TSX SAY 100
AS-interface Module
Select the module TSX SAY 100 then confirm with the command OK.
35006196 03 October 2005