Download SmartWire-Darwin Gateways

Transcript
MN05013002Z-EN
Programming the
EU5C-SWD-DP
You can then select in the Hardware Catalog the SWD
slaves that you require on this SWD gateway.
h
Observe the correct order of the SWD slaves in the SWD
network. The SWD slaves must be configured according to
their arrangement in the installation.
X Double-click
the required SWD slaves.
Figure 25: Selecting the SWD slaves on the EU5C-SWD-DP (Mot)
gateway
h
58
Caution!
The universal module is not a valid SWD slave and must
not be added to the project.