Download Manual

Managing the BayStack 303/304 Switch Using a Web Browser
•
IP Configuration:
— IP Address
The Internet Protocol (IP) address of the unit. The IP address must be a
unique address for initiating a Telnet session or managing the BayStack
switches using SNMP. The factory default setting of the IP address is
127.0.0.2. Any change takes effect at the next reset only.
— IP Subnet Mask Address
The subnet mask that indicates which bits are used for network/subnet
identification and which are used for end nodes or stations. The subnet
mask is written in the form of an IP address, with all network/subnet bits
set to one. The default subnet mask is 0.0.0.0. Any change takes effect at
the next reset only.
— Default Gateway Address
The address of the IP gateway during normal switch operation. The
default gateway address is 0.0.0.0. This address is set separately from the
TFTP gateway address used for downloading upgrades from the Software
Load page as described on page 5-11.
•
Features:
— Spanning Tree Protocol [Disable/Enable]
The Spanning Tree Protocol is compliant with the IEEE 802.1d standard
that detects and eliminates logical loops in a bridged or switched network.
When multiple paths exist, the spanning tree algorithm puts some links in
a hot standby idle state so that there is only one active path between any
two nodes. If any of the active network links fail, standby links are
brought online to maintain network connectivity.
This parameter allows you to enable or disable the Spanning Tree
Protocol. The default for this field is Enabled. Any change takes effect
immediately and does not require resetting the switch. For a more detailed
explanation of this feature, refer to “Spanning Tree Protocol” on page 3-5.
Caution: The Spanning Tree Protocol protects your network from infinite
packet circulation caused by inadvertently creating a configuration containing
a loop in the topology. Before you disable Spanning Tree Protocol, be certain
that your network is loop-free, or it will instantly become saturated and lock
up from the infinite loop traffic.
893-01010-B
5-9