Download UPMS Users Manual

the lower right corner must be pressed to change these options. UPMS will not allow you
to save changes where the minimum is less than one, or where the range spanned is zero.
Figure 11
Select the Active Display option from the Tools Menu (Figure 11). The program will
spend a few moments reading the grid and building the display objects. When finished,
the Display panel will show the grid as seen in figure 11. Notice the axis display in the
lower left. This feature is not available on Windows NT. Several of the cuts have been
rendered in shades of blue, brown, and red. The colors indicate the boundary conditions
assigned to these cuts. In the figure you can see two cuts which are mirror images of
each other, but one is solid blue and the other is red mesh. These represent the currently
selected cut in the Boundary condition panel, which is a patched condition. The solid
22