Download Advantys STB - LUCKINSlive
Transcript
The STB NIP 2212 NIM Logic Power Flow The figure below shows how the NIM’s integrated power supply generates logic power and sends it across the primary segment: The figure below shows how the 24 VDC signal is distributed to an extension segment across the island: The logic power signal is terminated in the STB XBE 1100 module at the end of the segment (EOS). Island Bus Loads The built-in power supply provides logic bus current to the island. If the logic bus current drawn by the I/O modules exceeds the available current, install additional STB power supplies to support the load. Consult the Advantys STB System Planning and Installation Guide for the current provided and consumed by Advantys STB modules at various operating temperatures and voltages. 31003688 08/2013 37