Download Printing Guide

GRAPHIC PRO
This section describes the color matching options available for Graphic Pro.
The Graphic Pro color matching system is based around ICC profiles. These profiles are
downloaded to the printer using the Profile Assistant utility and then selected in the printer
driver. When a job is sent to the printer, the ICC profiles are applied to the print job on the
printer.
NOTE
> Some features of Graphic Pro color matching can only be used if your
printer is fitted with a storage device. The printer storage device is
required if you wish to download and use your own ICC profiles to the
printer.
> If your printer does not have a storage device fitted, you will only be able
to select the factory default profiles that are built-in to the printer.
WHAT CAN YOU DO WITH GRAPHIC PRO COLOR MATCHING?
The Graphic Pro color matching system is both powerful and flexible. Here are some
examples of how the Graphic Pro color matching system can be used:
Matching printer color to an RGB input device
By using the ICC profiles of a scanner, digital camera or monitor, the printer's color can be
matched to the input device.
Printer simulation
Your printer can be used to simulate the color output of another printer, even when printing
RGB documents. For best results, use CMYK documents when simulating the color output
of other printers.
CMYK ink simulation
Your printer can be used to simulate the color output of a commercial printing press (SWOP,
Euroscale or Japan Color inks).
More accurate printer color
If you have created your own profiles with third-party ICC profile creation software, these
can be downloaded to the printer and used when printing.
Color matching (advanced) > 30