No category

Download INSTRUMENTS WITH DIGITAL SOUL axiomet.eu

Transcript

axiomet.eu
VER. 5
INSTRUMENTS WITH DIGITAL SOUL
AX-201 Handheld
Multimeters
with Backlight
AX-7030
Analogue-Digital
Multimeters
Features:
l
8 functions, 20 ranges
l
diode and continuity test with buzzer
l
battery test function
l
protective holster
Specifications:
Display
DC voltage
AC voltage
DC current
AC current
Resistance
Battery test
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: analogue and LCD 3,5 digits (15 mm)
: 0,2/2/20/200/600V ± 3% / ± 0,5% +2c
: 0,2/2/20/200/600V ±4% /± 0,8% + 3c
: 0,2mA/2mA/20mA/200mA/10A
: ±3% / ±1% +3c
: 0,2mA/2mA/20mA/200mA/10A
: ±4% / ±1,5% +3c
: 200/2K/20K/200K/2M/20MΩ
: ±3%/± 0,8% +3c
: 1,5V (100 mA) / 9 V (10 mA)
: test current about 1 mA
: test voltage about 2,4 V
: acoustic alarm for R<30Ω
: 190 x 108 x 50 mm
: 470 g (with battery)
: 9V 6F22 battery
: EN61010, Cat. II 600V
Features:
Features:
l
LCD display 3,5 digits (1999),
digits 13 mm high
l
auto ranging
l
auto polarisation indicator
l
over range indicator
l
low battery indicator
l
HOLD function
l
display with backlight
l
flashlight
l
auto power off
l
diode and continuity test with buzzer
l
logic state tester (TTL)
Specifications:
Display
DC voltage
AC voltage
Resistance
DC current
AC current
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
AX-100 Portable
Digital
Multimeters
: LCD 3,5 digits,
: digits 13 mm high
: 200 mV, 600V
: 2V, 600V
: 200Ω, 20MΩ
: 20mA, 200mA
: 20mA, 200mA
: test current 0,5 mA / test voltage 1,5 V
: acoustic alarm for R < 50 Ω
: 230 x 57 x 30 mm
: 182 g (with battery)
: 9V 6F22 battery (not included)
: IEC-61010, Cat. II 600V
l
LCD display 3,5 digits
l
shock-resistant case
l
manual ranging
l
diode and continuity
test with buzzer
l
low battery indicator
Specifications:
Type of display used
Sampling
AC voltage measuring range
DC voltage measuring range
DC current measuring range
Resistance measuring range
Diode test
Continuity test
Overall dimensions (W x D x H)
Weight with battery
Power supply
: LCD 3,5 digit (1999)
: 3x/s
: 100m...200/600V
: 100µ...200m/2/20/200/600V
: 1µ...20u/200u/2m/
: 20m/200m/10A
: 0,1Ω...200Ω/2kΩ/
: 20kΩ/200kΩ/20MΩ
: 1mA, 3V
: Acoustic signal for R<70Ω
: 85 x 30 x 145 mm
: 170 g
: 1 battery 9V 6F22
Standard equipment:

test leads
Standard equipment:

test leads set
AX-7003 Pocket
Size Analogue
Meters
Features:
AX-MS811 Pocket
Digital Multimeters
500V AC/DC
Features:
AX-MS8221A Digital
Multimeters
with Buzzer
Features:
l
6 functions, 14 ranges
l
LCD display 3,74 digits
l
battery test function
l
auto ranging
l
low battery indicator
l
disconnectable test leads
l
auto polarization
l
separate socket for measuring
l
dB measurement
indicator
l
protective holster
l
REL relative
l
HOLD function
NPN and PNP transistor's hFE
l
measure DC and AC current
measurement function
l
diode and continuity
up to 10A
l
continuity test with buzzer
test with buzzer
l
over range indicator
l
low battery indicator
Specifications:
DC voltage / Accuracy
AC voltage / Accuracy
DC current / Accuracy
Resistance / Accuracy
Battery test
Decibels
Dimensions
Weight
Supply
Safety
Specifications:
: 10 / 50 / 250 / 500V ±5%
: 50 / 250 / 500 V ±5%
: 25 / 250 mA ±5%
: 10 kΩ / 1 MΩ ±5%
: 1,5 V (125 mA) / 9 V (25 mA)
: 4 to 56 (0 dB: 1 mW / 600W)
: 120 x 90 x 30 mm
: 160 g (with battery)
: 1,5V LR03 battery
: IEC/EN61010, Cat. II 300V
Display
DC voltage
AC voltage
Resistance
Capacitance
Frequency
Filling rate
Diode test
Continuity test
Dimensions
Supply
Safety
: LCD 3,75 digits (4000)
: 0,1mV...400mV/4V/400V/500V
: 1mV...4V/40V/400V/500V
: 0,1Ω...400Ω
: 4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
: 0,001nF...4nF/40nF/400nF/4μF/40μF/200μF
: 0,001Hz...5Hz/50Hz/500Hz/
: 5kHz/50kHz/500kHz/10MHz
: 0,1...99%
: current test 1 mA / voltage test 1,5V
: acoustic signal for R < 60Ω
: 108 x 56 x 11,5mm
: 3V CR2032 battery (not included)
: EN61010 Cat. II 500V
Standard equipment:

soft carrying case with belt holder
02
Specifications:
Display
DC voltage
AC voltage
DC current
AC current
Resistance
Continuity test
Diode test
DC Test of transistor's hFE
Safety
Supply
Dimensions
Weight
: LCD 3,5 digits (1999), digits 15mm high
: 200mV/2V/20V/200/1000V
: 2V/20V/200V/750V(40Hz-1kHz)
: 200µA/2mA/20m/200m/10A
: 2mA/20m/200m/10A(40Hz-1kHz)
: 200/2k/20k/200k/2M/20MΩ
: acoustic alarm for R<50Ω
: test current: 1 mA; test voltage: 2,8V
: 2,8 V test voltage
: IEC/EN61010-1 Cat. II 1000V,
Cat. III 600V
: 1,5V LR03, 3 batteries (included)
: 158x74x32 mm
: 250 g (with batteries)
Standard equipment:

test leads
www.axiomet.eu
AX-101B Digital
Multimeters
Features:
l
LCD with backlit
l
square waveform generator
l
shock-resistant case
l
manual ranging
l
diode and continuity test with buzzer
l
low battery indicator
AX-105 Automatic
Digital Pocket
Multimeters
Features:
Features:
l
3.75 (3999) LCD display
l
auto and manual ranging
l
relative measurement function REL
(differential measurement)
l
HOLD function (holds measurements
results on the display)
l
Duty Cycle measurement
Specifications:
: LCD 3,5 digit (1999)
Display
Sampling
: 2-3x/s
AC voltage measuring range : 100m...200/500V
DC voltage measuring range : 100µ...200m/2/20/200/500V
DC current measuring range : 1µ...2m/20m/200m/10A
Resistance measuring range : 0.1...200/2k/20k/200k/20M/200MΩ
Continuity test
: acoustic signal for R<70Ω
Weight with battery
: 156 g
Overall dimensions (W x D x H) : 74 x 35 x 150 mm
Power supply
: 1 battery 9V 6F22
Equipment
: user's manual;
: test leads
AX-582B Digital Multimeters
with Backlit Display
Features:
AX-572 Digital Multimeters
with Backlit
Display
l
diodes and continuity
test with buzzer
l
over range indicator
l
auto power off
l
low battery indicator
l
protetive holster
l
LCD 3,5 digit (1999)
40 mm high
l
automatic power-off
l
impact resistant holster
l
measures transistors' gain
(hFE) by means
of the adapter included
l
manual ranging
l
diode and continuity test
with buzzer
l
low battery indicator
l
over range indication
"1" or "-1"
Specifications:
Display
Sampling rate
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Capacitance
Frequency
Temperature
LED test
Continuity test
Dimensions
Weight
Supply
: LCD 3.75 digits (3999), digits 18.9 mm high
: 3 x/s
: 100μV...400mV/4V/40V/400V/600V
: 1mV...4V/40V/400V/600V
: 0.1μA...400μA/4000μA/40mA/400mA/10A
: 0.1μA...400μA/4000μA/40mA/400mA/10A
: 0.1Ω...400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
: 1pF...4nF/40nF/400nF/4μF/40μF/100μF
: 0.001Hz...1Hz/10Hz/100Hz/1kHz/10kHz/100kHz
: 1MHz/30MHz
: -20°C to 1000°C
: testing current 0.5 mA / testing voltage 1.5 V
: acoustic signal for R < 50 Ω
: 145 x 74 x 36 mm
: 190 g (with batteries)
: 1.5V LR03, 2 batteries (not included)
Specifications:
Display
Sampling
DC voltage measuring range
AC voltage measuring range
DC current measuring range
AC current measuring range
Resistance measuring range
Capacitance measuring range
Diode test
Continuity test
Transistors' gain (hFE) test
Conform to the norm
Overall dimensions (W x D x H)
Weight
Power supply
: LCD (1999)
: 3x/s
: 100µ...200m/2/20/200/1000V
: 1m...2/20/200/750V
: 0.01µ...20µ/2m/200m/20A
: 1µ...2m/200m/20A
: 0.1...200/2k/20k/200k/2M/20MΩ
: 10p...20n/2µ/200µF
: 1mA, 3V
: acoustic signal for R<70Ω
:3V
: EN61010 600V CAT III
: 93 x 55 x 175 mm
: 400 g
: 1 battery 9V 6F22
Standard equipment:

test leads with contact tips

type K temperature probe with ball tip at one end,
and 4 mm banana plugs at another end
l
large, backlit LCD (28mm)
l
automatic power-off
l
HOLD function
l
impact resistant holster
l
measures transistors' gain (hFE)
AX-588B Digital Multimeters with
Inductance
Measurement
by means of the adapter included
l
manual ranging
l
diode and continuity test
with buzzer
l
detects line wire
(acoustic and optical indication)
Specifications:
Meter type
Type of display used
Sampling
DC voltage measuring range
: digital multimeter
: LCD 3,5 digit 28mm
: 3x/s
: 0,1m...200m/2/
20/200/1000V
AC voltage measuring range
: 1m...2/20/200/750V
Bandwidth for AC voltage measurements : 40Hz...200Hz
DC current measuring range
: 0,1µ...200µ/20µ/
20m/200m/2/20A
AC current measuring range
: 0,1m...200m/2/20A
Bandwidth for AC current measurements : 40Hz...200Hz
Resistance measuring range
: 0,1...200/2k/20k/
200k/2M/200MΩ
Capacitance measuring range
: 10p...20n/2µ/200µF
Diode test
: 1mA, 3V
Continuity test
: acoustic signal for R<70Ω
Overall dimensions (W x D x H)
: 97 x 35 x 189 mm
Weight with battery
: 375 g
Power supply
: 1 battery 9V 6F22
Safety
: EN61010 600V CAT IV
Standard equipment:

adapter for capacitance and transistors' gain (hFE) measurement

test leads
Optional equipment:

AX-58P soft cover
www.axiomet.eu
Specifications:
Meter type
: digital multimeter
Type of display used
: LCD 3,5 digit 28mm
DC voltage measuring range
: 0,1m...200m/2/20/200/1000V
AC voltage measuring range
: 0,1m...200m/2/20/200/750V
Bandwidth for AC voltage measurements : 40Hz...400Hz (to 200V),
40Hz...100Hz (to 750V)
DC current measuring range
: 1µ...2m/20m/200m/20A
AC current measuring range
: 1µ...2m/20m/200m/20A
Bandwidth for AC current measurements : 40Hz...200Hz
Resistance measuring range
: 0,1...200/2k/20k/200k/
2M/20M/2000MΩ
Capacitance measuring range
: 10p...20n/2000n/2µ/20µ/200µF
Frequency measuring range
: 1...2k/20k/200k/2M/10MHz
Temperature measuring range
: -40...1000°C
Inductance measuring range
: 1µ...2m/20m/200m/2H/20H
Diode test
: 1mA, 3V
Continuity test
: acoustic signal for R<70Ω
Overall dimensions (W x D x H)
: 97 x 35 x 189 mm
Weight with battery
: 400 g
Power supply
: 1 battery 9V 6F22
Safety
: EN61010 600V CAT IV
Standard equipment:

adapter for capacitance and transistors' gain (hFE) measurement

test leads

drop-like K-type probe with crocodile clips 4mm TP-09
Optional equipment:

AX-58P soft cover
Features:
l
large, backlit LCD (28mm)
l
automatic power-off
l
PEAK HOLD function
l
impact resistant holster
l
measures frequency, capacitance and temperature
l
measures transistors' gain (hFE) by means of the adapter included
l
manual ranging
l
enhanced range of resistance measurement to 2000MΩ
l
diode and continuity test with buzzer
03
AX-585B Digital
Multimeters 4,5 Digit with
Backlit Display
AX-MS8250 Digital Multimeters
with Built-in
Voltage Detector Display
Features:
l
large, backlit LCD (32mm)
l
LCD display 3 3/4 digits,
3999 counts with bargraph,
digits 33 mm high
l
auto ranging function
l
USB interface
l
HOLD function
l
Min./Max. function
l
relative measurement function REL
l
over range indicator
l
low battery indicator
l
diode and continuity test
with buzzer
l
auto power off after 30 min.
l
protective holster
l
HOLD function
l
impact resistant holster
capacitance and temperature
l
large, LCD display
with backlight digits 18 mm high
l
low battery indicator
l
manual ranging
l
continuity test
(acoustic and optical indication)
l
auto and manual ranging
l
diode test
l
HOLD function
l
REL function
l
diode and continuity test
l
frequency, capacitance,
and temperature measurement
l
auto power off after 15 minutes
Specifications:
Display
: LCD 3,75 digits (3999),
digits 18mm high
DC voltage
: 0,1mV...400mV/4V/40V/400V/1000V
AC voltage
: 1mV...4V/40V/400V/750V
Bandwidth
: 40 Hz - 400 Hz
DC current
: 1µA...4000µA/400mA/10A
AC current
: 1µA...4000µA/400mA/10A
Bandwidth
: 40 Hz - 400 Hz
Resistance
: 0,1Ω...40MΩ
Capacitance
: 1pF...200μF
Frequency
: 0,001Hz...9,999Hz/>200kHz
Temperature
: - 20°C to +1000°C
Non-contact voltage detector : > 50V
- frequency
: 50 Hz
- distance
: < 150 mm
Diode test
: test current 1 mA DC,test voltage 1,5 V DC
Continuity test
: acoustic alarm for R<40 Ω
Dimensions
: 156 x 82 x 29 mm
Weight
: 220 g (with batteries)
Supply
: 1,5 V R03, 3 batteries
Safety
: Cat. III 600V and Cat. II 1000V
Specifications:
Meter type
: digital multimeter
Type of display used
: LCD 4,5 digit (19999) 32mm
Sampling
: 3x/s
DC voltage measuring range
: 10µ...200m/2/20/200/1000V
AC voltage measuring range
: 100µ...2/20/200/750V
Bandwidth for AC voltage measurements : 40Hz...400Hz
DC current measuring range
: 0,01µ...200µ/2m/
20m/200m/20A
AC current measuring range
: 1µ...20m/200m/20A
Bandwidth for AC current measurements : 40Hz...200Hz
Resistance measuring range
: 0,01...200/2k/20k/
200k/2M/200MΩ
Capacitance measuring range
: 1p...20n/2µ/200µF
Frequency measuring range
: 1 Hz...20k/200kHz
Temperature measuring range
: -10...1000°C
Temperature measurement resolution
: 0.1°C
Diode test
: 1mA, 3V
Continuity test
: acoustic signal for R<70Ω
Overall dimensions (W x D x H)
: 97 x 35 x 189 mm
Weight with battery
: 400 g
Power supply
: 1 battery 9V 6F22
Safety
: EN61010 600V CAT IV
Standard equipment:

test leads

drop-like K-type probe with crocodile clips 4mm TP-09
Optional equipment:
Standard equipment:

test leads set with test tips
Features:
l
automatic power-off
l
measures frequency,
Features:
AX-594 Automatic
Multimeters with Bargraph
and USB

AX-58P soft cover
AX-190A
Multifunction Digital Multimeter
Specifications:
Display
Sampling rate
DC voltage
AC voltage
DC current
AC current
Resistance
Capacitance
Frequency
Temperature
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD display 3 3/4 digits,
capacity 3999 counts, digits 33mm high
: 3x/s
: 0,1mV… 1000V
: 0,1mV… 750V
: 1μA... 10A
: 1μA... 10A
: 0,1Ω... 40MΩ
: 10pF... 200µF
: 0,01Hz… 30MHz
: -20ºC to 1000ºC
: test current 1mA / test voltage 3V
: acoustic alarm for R<50 Ω
: 192 x 95 x 48 mm
: 390 g (with battery)
: 1.5V LR03, 2 batteries (not included)
: Cat. IV 600V and Cat. III 1000V
Standard equipment:

test leads

temperature probe

optocable with USB for connecting the multimeter to a PC

software
AX-150 True RMS 3,5 Digits
Digital Multimeters
Features:
l
LCD display 3 3/4 digits (3999)
l
auto and manual ranging
l
automatic power-off
l
HOLD function
Features:
Specifications:
Meter type
Display
Sampling
DC voltage measuring range
AC voltage measuring range
DC current measuring range
AC current measuring range
Resistance measuring range
Capacitance measuring range
Frequency measuring range
Temperature measuring range
Humidity measuring range
Illumination measurement
Sound level measuring range
Duty cycle factor
Diode test
Continuity test
Overall dimensions (W x D x H)
Weight with battery
Power supply
Safety
: digital multimeter
: LCD (4000)
: 3x/s
: 0,1m...400m/4/40/400/600V
: 0,1m...400m/4/40/400/600V
: 0,1µ...400µ/4000µ/400m/10A
: 0,1µ...400µ/4000µ/400m/10A
: 0,1...400/4k/40k/400k/4M/40MΩ
: 10p...50n/500n/5µ/50µ/100µF
: 0,001...5/50/500/5k/50k/500k/10MHz
: -20...1300°C
: 33...99% RH
: 0.001...40 klux
: 35...100 dB
: 0.1...99.9%
: 1,4mA, 2,8V
: acoustic signal for R<50Ω
: 78 x 48 x 170 mm
: 335 g
: 1 battery 9V 6F22
: EN61010 1000V CAT III,
EN61010 600V CAT IV
l
automatic power-off
l
HOLD function
l
REL function
l
overload protection
l
measures temperature,
humidity, illumination
and sound level
l
diode and continuity
test with buzzer
l
overflow indicator
l
contactless voltage detector
l
automatic selection
of measuring ranges
Standard equipment:

test leads

drop-like K-type temperature probe
04
l
MIN/MAX/REL function
l
diode and continuity test with buzzer
l
low battery indicator
l
over range indicator "OL"
Specifications:
Display
: LCD (3999)
Sampling
: 3x/s
AC voltage measuring range : 1m...4/40/400/750V
DC voltage measuring range : 0.1m...400m/4/40/400/1000V
AC current measuring range : 0.1µ...400µ/4000µ/40m/400m/10A
DC current measuring range : 0.1µ...400µ/4000µ/40m/400m/10A
Resistance measuring range : 0.1...400/4k/40k/400k/4M/40MΩ
Capacitance measuring range : 10p...10n/100n/1000n/10µ/100µ/1000µF
Temperature measuring range : -20...1000°C
Diode test
: 0,5mA, 1,5V
Continuity test
: acoustic signal for R<40Ω
Conform to the norm
: EN61010 600V CAT IV
Weight
: 420 g
Dimensions
: 180 x 91 x 45 mm
Power supply
: 2 batteries 1,5V LR6 (AA)
Standard equipment:

crocodile clips (red, black)

test leads

K-type temperature probe
www.axiomet.eu
AX-155 Digital
Multimeters
with True RMS
AX-174 Automatic Multimeters
True RMS with Auto-Scan
Function
Features:
Features:
l
LCD bargraph display with backlight,
4000 counts, digits 21 mm high
l
auto ranging
l
HOLD function (holds measurements
results on the display)
l
Min/Max function
l
PEAK function (measurement of short
impulse signals shorter than 1ms)
l
over range indicator
l
low battery indicator
l
diode and continuity test with a buzzer
l
auto power off after 30 min.
l
protective holster
Specifications:
Display
Sampling rate
DC voltage
AC voltage
DC current
AC current
Resistance
Capacitance
Frequency
Temperature
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD with 4000 counts, digits 21 mm high
: 2x/s
:0,1mV...400mV/4V/40V/400V/1000V
:0,1mV...400mV/4V/40V/400V/1000V
:1μA...400μA/4000μA/40mA/400mA/10A
:1μA...400μA/4000μA/40mA/400mA/10A
:0,1Ω...400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
:1pF...4nF/40nF/400nF/4μF/40μF/400μF/4mF/40mF
:1Hz...4kHz/40kHz/400kHz/10MHz
: -20ºC to 760ºC
: test current 0,1mA / test voltage 3V
: acoustic signal for R < 35 Ω
: 182 x 82 x 55 mm
: 375 g (with battery)
: 9V 6F22 battery (not included)
: Cat. IV 600V and Cat. III 1000V
Standard equipment:

test leads set with test tips
l
LCD display with backlight
l
measurement of real effective
value True RMS
AX-178 Professional Digital
Multimeters with True RMS
and IrDa Interface
l
function of tested element
detection - Auto-Scan
l
non-contact voltage detector
l
HOLD function
l
auto and manual ranging
l
Min/Max function
l
diode and continuity test
with buzzer
l
auto power off function
l
low battery indicator
Specifications:
Display
Sampling rate
DC voltage
AC voltage
DC current
AC current
Resistance
Capacitance
Frequency
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD 3 5/6 digits with 6000 counts
: 3x/s
: 100μV...600mV/6V/60V/600V/1000V
: 100μV...600mV/6V/60V/600V/1000V
: 0,1μA...600μA / 6mA/60mA/600mA / 10A
: 0,1μA...600μA / 6mA/60mA/600mA / 10A
: 0,1Ω...600Ω / 6kΩ/60kΩ/600kΩ / 6MΩ/60MΩ
: 1pF...6nF/60nF/600nF / 6μF/60μF/600μF / 6m/60mF
: 0,001Hz...6kHz/10kHz
: test current 1 mA / test volt. 2,8 V
: acoustic alarm for R < 30
: 190 x 90 x 40 mm
: 500 g (with battery)
: 9V 6F22 battery (not included)
: EN61010: Cat. III 1000V, Cat. IV 600V
Standard equipment:

test leads set
Features:
l
LCD display,
capacity 50 000 counts
l
low battery indicator
l
auto/manual ranging
l
HOLD function
l
Min./Max. function,
for relative measurement
l
diode and continuity test
l
resistance measurement
resolution 0,01 Ω
l
voltage measurement
l
resolution 1 µV
l
measure DC and AC voltage
up to 1000V
l
measure true RMS for AC/DC
l
measure frequency of linear
and rectangular waveforms
l
measure capacitance to 5 mF
l
measure gain (loss)
l
measure duty cycle factor
AX-18B
Multimeters
with USB Interface
AX-176 Automatic Multimeter
True RMS with USB Interface
Features:
Features:
l
acoustic indication in case of incorrect test leads connection
l
auto power off
l
IrDa interface
Specifications:
l
auto/manual ranging
l
DATA HOLD function
l
REL function
(differential measurement)
l
diode and continuity test
with buzzer
l
Duty Cycle measurement
l
auto power off after 30 min.
of idleness with possibility
to switch off this function
l
low battery indicator
l
electronic protection
Specifications:
Display
DC voltage
AC voltage
DC current
AC current
Resistance
Continuity test
Diode test
Capacitance
Frequency
Temperature
Duty Cycle
Dimensions
Weight
Supply
Safety
: LCD 3,5/6(max.6000), digits 14mm high
: 0,1mV…1000V
: 0,1mV…700V(40Hz-500Hz)
: 0,1µA... 10A
: 0,1µA...10A (40Hz…200Hz)
: 0,1Ω…60MΩ
: acoustic alarm for R<50Ω
: test current: 1mA / test voltage 1,5V
: 0,01nF…300µF
: 0,01Hz…1MHz
: -55°C...1000°C
: 0,1% to 99,9%
: 180 x 85 x 40 mm
: about 310 g (with battery)
: 9V 6F22 battery
: Cat. II 1000V and Cat. III 600V
Standard equipment:

test leads set

test leads set for capacitance measurement

PC-Link software on CD

optocable with USB

temperature probe with ball tip and 4mm banana plugs
Optional equipment:

soft carrying case
www.axiomet.eu
l
LCD display with backlight
l
auto/manual ranging
l
real effective value
measurement True RMS
l
HOLD function
l
Min/Max/Rel function
l
PEAK HOLD Min/Max function
(impulse signals storage)
l
USB interface
l
diode and continuity test
with buzzer
l
auto power off
l
low battery indicator
Specifications:
Display
Sampling rate
DC voltage
AC voltage
DC current
AC current
Resistance
Capacitance
: LCD with 6600 counts
: 3x/s
: 100μV...660mV/6,6V/66V/660V/1000V
: 100μV...660mV/6,6V/66V/660V/1000V
: 0,1μA...660μA/6600μA / 66mA/600mA/10A
: 0,1μA...660μA/6600μA / 66mA/600mA, 10A
: 0,1Ω...660Ω / 6,6kΩ/66kΩ/660kΩ / 6,6MΩ, 66MΩ
: 1pF...6,6nF/66nF/660nF / 6,6μF/66μF/660μF
: 6,6mF/66mF
Frequency
: 0,001Hz..66Hz/660Hz/6,6kHz/66kHz/660kHz
: 6,6MHz/66MHz
Temperature
: -55...1000°C
Filling rate
: 1...99%
Diode test
: test current 1 mA / test volt. 2,8 V
Continuity test : acoustic alarm for R < 30Ω
Dimensions
: 190 x 90 x 40 mm
Weight
: 500 g (with battery)
Supply
: 9V 6F22 battery (not included)
Safety
: EN61010: Cat. III 1000V, Cat. IV 600V
Display
AC voltage/DC + AC
Bandwidth
DC voltage
AC current/DC + AC
Bandwidth
DC current
Resistance
Capacitance
Frequency
Sensitivity
Frequency
Sensitivity
Duty cycle
Waveform frequency
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD with capacity 50000 counts
51-segment bargraph
: 0,001mV...1000V
: 40 Hz - 20 kHz
: 0,001mV...1000V
: 0,01µA...10A
: 40 Hz - 20 kHz
: 0,01µA...10A
: 0,01Ω...50MΩ
: 0,01nF...5000µF
: 5Hz - 200kHz linear waveform
: 100 mV
: 5 Hz - 2 MHz rectangular waveform
: Vp 2 - 5 V
: 0,01%...5% - 95%
: 5 Hz - 500 kHz
: 0,1 mV...2,5V
: acoustic alarm for R<50 Ω
: 200 x 100 x 40 mm
: 560 g (with batteries)
: 1,5 V R03, 6 batteries
: Cat. III 1000V
Standard equipment:

soft carrying case

test leads set with insulated clips

test leads set with test tips

optocable with USB for connecting the multimeter to a PC

software running under Windows 98/2000/NT/XP OS
Standard equipment:

test leads set

software

optocable with USB

K-type probe with ball tip

adapter banana plug - socket K-type
05
AX-8450 High Precision Table
Multimeters 4,5 digits
True RMS
AX-T520 Digital Multimeters
with LAN Tester
Features:
l
auto ranging
l
high precision
l
HOLD function
(holds measurements results on the display)
Features:
l
Min./Max./Rel. function
l
large LCD display with backlight
l
LAN testing function
(RJ45 connection) and telephone
lines testing function
l
HOLD function
(holds measurements
results on the display)
l
continuity test with buzzer
l
manual ranging
l
battery tester 1,5V, 6V, 9V
l
low battery indicator
Specifications:
Display
DC voltage
AC voltage
DC current
AC current
Resistance
Continuity test
Dimensions
Weight
Supply
Safety
: LCD 3,5 digits (3999)
digits 15mm high
: 200mV/2V/20V/200V/1000V
: 200mV/2V/20V/200V/750V
: 0,2mA/2mA/20mA/200mA/10A
: 0,2mA/2mA/20mA/200mA/10A
: 200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ/200MΩ
: acoustic signal for R < 70Ω
: 185 x 85 x 44 mm
: 360 g (with battery)
: 9V 6F22 battery
(not included)
: EN61010:
Cat. II 600V, Cat. III 300V
Standard equipment:

test leads set

adaptor for LAN network testing
l
dBm and dB measurement
l
diode and continuity test with buzzer
l
relative measurement
l
manual, automatic or external trigger
l
remote interface RS-232C
l
USB interface
Standard equipment:
l
SCPI programming language

test leads set

supply cable
Specifications:
Display
Sampling rate
DC voltage
AC voltage
DC current
AC current
Resistance
: dual LCD 4,5 digits
: to 25x/s
: 10μV...200mV/2V/20V/200V/1000V
: 10μV...200mV/2V/20V/200V/750V
: 0,1μA...2mA/20mA/200mA/2A/20A
: 0,1μA...2mA/20mA/200mA/2A/20A
: 0,01Ω...200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ
: 0,0001Hz...10Hz/100Hz/100kHz/1MHz
: current test 0,5 mA / voltage test 2 V
: acoustic signal for R < 10 Ω
: 225 x 100 x 355 mm
: 2,2 kg
: 110/220V ±10%
AX-C709 Multimeters with
Calibrator Function
Specifications:
Features:
Display
: LCD (3999)
AC voltage measuring range
: 0.01m...400m/4/40/400V
DC voltage measuring range
: 0.01m...40m/400m/4/40/400V
AC current measuring range
: 0.01m...40m/400mA
DC current measuring range
: 0.01m...40m/400mA
Resistance measuring range
: 0.1...400/4k/40k/400k/4M/40MΩ
Frequency measuring range
: 0.01...50/500/5k/50k/100kHz
Temp. measuring range (with E-type thermocouple) : -200...500°C
Temp. measuring range (with J-type thermocouple) : -200...700°C
Temp. measuring range (with K-type thermocouple) : -200...1370°C
Temp. measuring range with N-type thermocouple
: -200...1300°C
Temp. measuring range (with R-type thermocouple) : -40...1760°C
Temp. measuring range (with T-type thermocouple) : -200...400°C
Temp. measuring range (with S-type thermocouple) : -20...1760°C
Voltage source
: -0.5V to 5.5V
Current source
: 4mA...20mA
Conform to the norm
: EN61010 600V CAT II
Weight
: 500 g
Dimensions
: 205 x 95 x 42 mm
Power supply
: 4 batteries 1,5V LR03 (AAA)
l
auto and manual ranging
l
automatic power-off
l
HOLD function
l
backlit LCD
l
diode and continuity test
with buzzer
l
compatible with 8 types
AX-503 Multimeters
- SMD Measurement
Tweezers
Frequency
Diode test
Continuity test
Dimensions
Weight
Supply
of thermocouples:
J, K, T, E, R, S, B, N
l
selection of Celsius
or Fahrenheit units
l
low battery indicator
l
RTD and resistance simulation
l
DC Voltage Output
l
Frequency Output
AX-C708 Multimeters with
Calibrator Function
Features:
l
low battery indicator
l
diode test
l
measures resistance and capacitance
l
relative measurement function
l
auto power off
Specifications:
Display
Resistance
Capacitance
Dimensions
Weight
Supply
: LCD 3,75 digits (6000)
: 0,1Ω...40MΩ
: 1pF...200µF
: 181 x 35 x 20 mm
: 65 g (with battery)
: 1,5V LR44, 2 batteries
Specifications:
Display
AC voltage measuring range
DC voltage measuring range
AC current measuring range
DC current measuring range
Resistance measuring range
Frequency measuring range
Diode test
Continuity test
Voltage source
Loop source
Current source
Weight
Dimensions
Power supply
Conform to the norm
06
: LCD (3999)
: 0.1m...400m/4/40/400V
: 0.01m...40m/400m/4/40/400V
: 0.01m...40m/400mA
: 0.01m...40m/400mA
: 0.1...400/4k/40k/400k/4M/40MΩ
: 0.01...50/500/5k/50k/100kHz
: 0,2mA, 1V
: acoustic signal for R<50Ω
: -50mV to 550mV
: -0.5V to 5.5V
: 5-28V
: -22mA to 22mA
: 500 g
: 205 x 95 x 42 mm
: 4 batteries 1.5V LR6 (AA)
: EN61010 600V CAT II
Features:
l
auto and manual ranging
l
automatic power-off
l
HOLD function
l
backlit LCD
l
diode and continuity
test with buzzer
l
low battery indicator
www.axiomet.eu
AX-507B Forceps R/C
for SMD with Auto-Scan
Function
AX-200 AC Clamp Meters
Features:
Features:
l
autoranging
Features:
l
auto/manual ranging
l
function of tested element detection - Auto-Scan
l
diode and continuity test with buzzer
l
over range indicator
l
auto power off
l
low battery indicator
Specifications:
Display
Sampling rate
Resistance
Capacitance
Diode test
Continuity test
Dimensions
Weight
Supply
: LCD 3,75 digits (6000)
digits 13 mm high
: 3 x/s
: 0,1Ω...300Ω/600Ω
: 3kΩ/6kΩ/30kΩ/60kΩ/300kΩ/600kΩ
: 3MΩ/6MΩ/30MΩ/60MΩ
: 1pF...3nF/6nF/30nF/60nF/300nF/600nF,
: 3μF/6μF/30μF/60μF/300μF/600μF,
: 3mF/6mF/30mF/60mF
: current test 1 mA / test volt. 2 V
: acoustic signal for R < 50 Ω
: 181 x 35 x 20 mm
: 65 g (with battery)
: 1,5 V LR44, 2 batteries (not included)
AX-LCR41A Precision
Bridges RLC
l
Double LCD display 5 digits
l
automatic power-off
l
manual ranging RANGE function
l
HOLD function
l
auto ranging with locking
l
diode test
l
parallel and serial circuit equivalent
l
overflow indicator
l
HOLD function (holds measurements
l
overload protection
results on the display)
l
cable integrity test
l
multi-frequency correction
l
low battery indicator
of idle state and short - circuit state
l
over range indicator
l
low battery indicator
l
buzzer
Specifications:
Display
AC current measuring range
AC voltage measuring range
DC voltage measuring range
Resistance measuring range
Max. diameter of measured cable
Conform to the norm
Weight with battery
Dimensions
Power supply
Specifications:
: LCD (1999) 3.5 digits
: 2/20/200A
: 2/20/200/600V
: 200m/2/20/200/600V
: 200/2k/20k/200k/2M/20MΩ
: 21 mm
: EN61010 600V CAT III
: 135 g
: 130 x 61 x 24 mm
: 3 batteries 1,5V LR03 (AAA)
Standard equipment:
Display
Sampling rate
Resistance
Impedance
Capacitance
Inductance
Quality and diffusion factor
Measuring frequencies
Dimensions
Weight
Supply
: Dual LCD 5 digits
: 3 x/s
: 0. 0001Ω - 9.999MΩ
: 0.0001Ω - 9.999MΩ
: 0.1pF – 9999μF
: 0.1μH – 9999H
: 0.0001 – 9999
: 100Hz, 120Hz, 1kHz
: 200 x 95 x 40 mm
: 400 g
: 1,5V LR03 battery (not included)
Standard equipment:

user's manual

case

test leads

AX-202 400A AC
Clamp Meters
with Thermometer
AX-203 400 A AC/DC
Clamp Meters
with Thermometer
AX-LCR42A RLC Bridges
Features:
Features:
Features:
Standard equipment:
12V DC power supply

4-lead Kelvin clips
soft carrying case with belt holder

l
jaw opens to Ø30mm
l
max. diameter for cable Ø30 mm
l
automatic power-off
l
resolution 0,001A
l
resolution 0,01 A
l
bargraph
l
HOLD function
l
non-contact voltage detector
l
non-contact voltage detector
l
diode and continuity test with buzzer
l
diode and continuity test with buzzer
l
double backlit LCD
l
HOLD function (display hold)
l
HOLD function
l
parallel or serial measurement
l
selectable parallel or serial
l
MAX function (max. value hold)
l
low battery indicator
l
low battery indicator
l
overrange indicator
l
over range indicator
l
auto power off
l
calibration function
equivalent circuit
l
auto power off
l
display with backlight
l
measurement quality factor Q,
l
display with backlight
l
display zeroing function
l
temperature measurement (°C or °F)
in DC measurements
l
temperature measurement (°C or °F)
dissipation factor D
and phase angle θ
l
REL function
Specifications:
Display
AC current
AC/DC voltage
Resistance
Capacitance
Frequency
Temperature
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD with 1999 counts
: 0,001A...400A
: 0,1mV...600V
: 0,1Ω...20MΩ
: 0,01nF...100µF
: 10MHz
: -20ºC...760ºC
: test current 0,3mA / test voltage 1,5V
: acoustic alarm for R < 150 Ω
: 197 x 70 x 40 mm
: 183 g (with battery)
: 9V 6F22 battery
: EN-61010-1, Cat. III 600V
Standard equipment:

test leads set

soft carrying case

K-type temperature probe
www.axiomet.eu
Specifications:
Display
AC current
AC/DC voltage
Resistance
Capacitance
Frequency
Temperature
Diode test
Continuity test
Dimensions
Weight
Supply
Safety
: LCD with 1999
counts
: 0,001A...400A
: 0,1mV...600V
: 0,1Ω...20MΩ
: 0,01nF...100µF
: 10MHz
: -20ºC...760ºC
: test current 0,3mA / test voltage 1,5V
: acoustic alarm for R < 150 Ω
: 197 x 70 x 40 mm
: 183 g (with battery)
: 9V 6F22 battery
: EN-61010-1, Cat. III 600V
Standard equipment:

test leads set

soft carrying case

K-type temperature probe
Specifications:
Display
Measurement frequency
Resistance measuring range
Capacitance measuring range
Inductance measuring range
Power supply
: double LCD (19.999/1999) digits
: 100Hz/120Hz/1kHz/10kHz/100kHz
: 20...200MΩ
: 200p...20mF
: 20m...20kH
: 6 batteries 1,5V LR03 (AAA),
mains power supply
Standard equipment:

batteries

four-wire Kelvin clips

user's manual
07
AX-380 AC/DC
Clamp Meters
up to 2000A
AX-353 600A
AC Clamp Meters
AX-354 AC/DC
Clamp Meters
up to 1000A
Features:
Features:
l
auto and manual ranging
l
automatic power-off
l
automatic power-off
Features:
with disable function
l
continuity test with buzzer
l
continuity test with buzzer
l
diode test
l
backlit LCD
l
overflow indicator
l
diode test
l
low battery indicator
l
automatic power-off
l
cable integrity test
l
low battery indicator
l
HOLD function
Specifications:
l
display zeroing function
in DCA measurements
l
diode and continuity test
with buzzer
l
low battery indicator
l
REL function
Specifications:
Display
Max. diameter of measured cable
AC current measuring range
DC current measuring range
AC voltage measuring range
DC voltage measuring range
Resistance measuring range
Capacitance measuring range
Frequency measuring range
Conform to the norm
Weight
Dimensions
Power supply
: LCD 3,5 digit (3999)
: 55 mm
: 400/2000A
: 400/2000A
: 400m/4/40/400/750V
: 400m/4/40/400/1000V
: 400/4k/40k/400k/4M/40MΩ
: 40n/400n/4µ/40µ/100µF
: 5,12/51,2/512/5,12k/51,2k/
512k/100kHz
: EN61010 600V CAT III
: 565 g
: 275 x 96 x 50 mm
: 1 battery 9V 6F22
Standard equipment:

test leads
AX-355 Clamp Meters 1000A
AC/DC with True RMS
and Thermometer
l
jaw opens to Ø30 mm
l
diode and continuity test
with buzzer
l
HOLD function
l
low battery indicator
l
overrange indicator
l
auto power off
l
display with backlight
l
display zeroing function
in DC measurements
l
Peak Hold function
l
temperature measurement (°C or °F)
l
automatic or manual ranging
l
overload protection
Specifications:
DC current
AC current
DC voltage
AC voltage
Resistance
Frequency
Capacitance
Temperature
Dimensions
Weight
Supply
Safety
: LCD 3,75 digits (3999)
: 41-segment bargraph
: 0,01A...40A / 1000A
: 0,01A...40A / 1000A
: 0,1mV...600V
: 0,1mV...600V
: 0,1Ω...40MΩ
: 0,001kHz...4kHz
: 0,001nF...40mF
: -40°C...1000 °C
: 229 x 80 x 49 mm
: 303 g
: 9V 6F22 battery
: EN-61010-1, Cat. III 600V
Standard equipment:
test leads set

soft carrying case

temperature probe

08
: LCD 3 3/4 digits (3999)
: 38 mm
: 400/500A
: 400m/4/40/400/600V
: 400m/4/40/400/600V
: 400/4k/40k/400k/4M/40MΩ
: -20°C...+800°C
: 40n/400n/4µ/40µ/100µF
: 4/40/400/4k/40k/400k/4M/10MHz
: 0.1...99.9%
: EN61010 600V CAT II
: 357 g
: 190 x 55 x 24 mm
: 3 batteries 3V CR2032
Standard equipment:
Specifications:
Display
Max. diameter of measured cable
DC current measuring range
AC current measuring range
AC voltage measuring range
DC voltage measuring range
Resistance measuring range
Frequency measuring range
Weight
Dimensions
Power supply
Conform to the norm
: LCD 3 3/4 digits (4000)
: 38 mm
: 400/1000A
: 400/1000A
: 400m/4/40/400/600V
: 400m/4/40/400/600V
: 400/4k/40k/400k/4M/40MΩ
: 10/100/1000/10k/100k/1MHz
: 150 g
: 190 x 64 x 24 mm
: 3 batteries 3V CR2032
: EN61010 600V CAT II
Standard equipment:

case

test leads

case

test leads
AX-356 1000A AC/DC Clamp
Meters with True RMS and
Temperature Measurement
AX-3550 1000A AC
True RMS clamp
watt meter
Features:
Features:
l
auto and manual ranging
l
large, backlit LCD with bargraph
l
automatic power-off
l
autoranging
l
large, backlit LCD
l
automatic power-off
l
HOLD function
l
HOLD function
l
MIN/MAX function
Features:
Display
Display
Max. diameter of measured cable
AC current measuring range
AC voltage measuring range
DC voltage measuring range
Resistance measuring range
Temperature measuring range
Capacitance measuring range
Frequency measuring range
Duty cycle factor
Conform to the norm
Weight
Dimensions
Power supply
l
MIN/MAX function
l
PEAK HOLD function
l
USB interface
l
display zero adjustment
in DC measurements
l
diode and continuity test
with buzzer
l
overflow indicator
l
overload protection
l
measures true RMS
of the current up to 1000A AC
l
selection of Celsius or Fahrenheit units
l
low battery indicator
Specifications:
Type of display used
Max. diameter of measured cable
Sampling
Bargraph
DC current measuring range
AC current measuring range
DC voltage measuring range
AC voltage measuring range
Resistance measuring range
Capacitance measuring range
Frequency measuring range
Temperature measuring range
Diode test
Continuity test
Weight without batteries
Dimensions
Power supply
Conform to the norm
and apparent power,
power factor and phase angle
l
measures true RMS AC
l
overload protection
l
contactless voltage detector
l
99 measurement memory
Specifications:
: LCD 3,75 digit (4000)
: 52 mm
: 2x/s
: 41 segm.
: 0,01...40/400/1000A
: 0,01...40/400/1000A
: 0,1m...400m/4/40/400/600V
: 0,1m...400m/4/40/400/600V
: 0,1...400/4k/40k/400k/4M/40MΩ
: 0,001n...4n/40n/400n/4µ/40µ/
400µ/4m/40mF
: 1...4kHz
: -20...760°C
: 0,3mA, 3V
: acoustic signal for R<40Ω
: 449 g
: 270 x 100 x 47 mm
: 1 battery 9V 6F22
: EN61010 1000V CAT III,
EN61010 600V CAT IV
Standard equipment:
case

test leads

drop-like K-type temperature probe

l
measures active, reactive
Display
AC voltage measuring range
AC current measuring range
Frequency measuring range
Active power measurement
Reactive power measurement
Apparent power measurement
Power factor measurement
Phase angle measurement
Max. diameter of measured cable
Dimensions
Weight without batteries
Power supply
Safety
: LCD 4 digits
: 0,1...100/400/750V
: 0,1...40/100/400/1000A
: 50...200Hz
: 0,6...750kW
: 0,6...750kVAR
: 0,6...750kVA
: 0,3...1
: 0...90°
: 55 mm
: 295 x 100 x 46 mm
: 537 g
: 1 battery 9V 6F22
: EN61010 300V CAT IV,
: EN61010 600V CAT III
Standard equipment:
USB cable
test probes

4 crocodile clips

software

case

test leads

www.axiomet.eu
AX-2040 Clamp Meters
AX-T01 Non-Contact
Voltage Detector
for 200 - 1000V AC
Features:
Specifications:
Display
DC voltage measuring range
AC voltage measuring range
AC current measuring range
Resistance measuring range
Power supply
Safety
Pollution degree
: LCD (4000)
: 4...400V
: 4...600V
: 40/400A
: 400/4M/40MΩ
: 2 batteries 1,5V LR06 (AA)
: EN61010 600V CAT III
:2
Features:
l
large, backlit LCD
l
non-contact voltage detector
l
autoranging
for 200-1000V AC
l
HOLD function
l
red LED and audible beeper indicator
l
overflow indicator
l
built-in torch with switch
l
contactless voltage detector
l
with clamp, e.g.: for pocket
l
low battery indicator
fastening
l
automatic selection of measurand
Standard equipment:
l
memory for 10 measurements

case

test leads
protective holster
Specifications:
Indicators
Voltage range
Dimensions
Weight
Supply voltage
Safety
AX-M266C Clamp
Meters for 1000 A AC
with Thermometer
: 3 1/2 digits LCD
: 0,01...20/200/1000A
: 0,1...200mV/ 20/200/1000V
: 0,1...200/600V(50Hz-500Hz)
: 0,1...200/20k/2MΩ
: 0°C...750°C
: acoustic alarm for R<50 Ω
: 230 x 90 x 43 mm
: 320 g (with battery )
: 9V 6F22 battery
: LED and beeper
: 200-1000V AC (50/60Hz)
: 176 x 26 mm
: 48g
: 1,5V LR03, 2 batteries (not included)
: Cat. III 1000V
AX-T02 Magnetic
Field Detectors
with Flashlight
Features:
Features:
Specifications:
Display
AC current
DC voltage
AC voltage
Resistance
Temperature
Continuity test
Dimensions
Weight
Supply
l
rugged, double
l
magnetic field detection
l
jaw opens to Ø54 mm
l
resolution for AC current range
from 0,01 A
l
built-in torch with switch
l
red LED for non-contact
voltage detection
l
DATA HOLD function
l
with clamp, e.g.: for pocket fastening
l
overrange indicator
l
rugged, double protective holster
l
low battery indicator
Specifications:
Standard equipment:

test leads set

soft carrying case

K-type temperature probe with ball tip
Indicator
Magnetic field (H)
Maximum operating current
Dimensions
Weight
Supply
AX-T2090 Cable Locators
Transmitter / Receiver
AX-903 Voltage,
Metal and Wood
Detectors
Features:
Features:
l
large readable transmitter display with backlight shows
signal level, transmission code and detected voltage value
l
receiver display with backlight shows signal level,
transmission code and detected voltage value
l
finding cables in walls, cables discontinuities and short-circuits
l
finding cable lines in the ground
l
detecting fuses and tracking of the actual circuit
l
tracking flush mounting sockets and boxes
l
locating circuits discontinuities and short-circuits
l
tracking water-main and heating pipes
l
live and break cables detecting without necessity of use
of additional equipment
l
automatic and manual sensitivity regulation
l
sound signalling with disable option
l
auto power off
l
measured point illumination function
Specifications:
Transmitter
Display
Voltage measurement
Frequency range
Output signal
Dimensions
Weight
Supply voltage
: LCD
: 12-400V
: 0-60Hz
: 125kHz
: 130 x 69 x 33 mm
: 130 g
: 9V 6F22 battery (not included)
: LED
: 63, 98, 401, 810
: 32mA
: 160 x 20 mm
: 48 g
: 1,5V LR03, 2 batteries (not included)
l
device for locating wooden and metal
Standard equipment:

hard, carrying case

test leads
Receiver
Display
Detection depth
Detection mode
Voltage detection
Dimensions
Weight
Supply voltage
Safety
www.axiomet.eu
objects and live wires to the depth
of 19 mm
l
acoustic and visual signaling on LCD
l
LED display for continuous detection
of live wires
l
180º rotary head with laser indicators
l
6-meter laser beam
l
built-in classic level line
l
ergonomic shape ensuring comfortable
and precise operation
l
auto calibration function for wood
and metal detection
l
auto power off
l
low battery indicator
l
rugged housing
Specifications:
: LCD with options and bargraph
: depends on material and application
: about 0-2m (unipolar operation)
: about 0-0,5m (bipolar operation)
: about 0-0,4m
: 192 x 61 x 37 mm
: 180g
: 9V 6F22 battery (not included)
: Cat. III 300V
Indicators
Detection accuracy:
– Wood
– Metal
Laser beam length
Laser accuracy
Dimensions
Weight
Supply voltage
: LED and beeper
: 0,3cm
: 0,6cm
: up to 6m
: 1,27cm at 6 m
: 180 x 76 x 38 mm
: 180g
: 9V battery, type 6F22
09
AX-7510 Infrared
Thermometers with
Adjustable Emissivity
AX-7520 Infrared
Thermometers with Adjustable
Emissivity
AX-6520 Infrared
Thermometers with Laser Sight
and Display with Backlight
Features:
Features:
laser sight
optical resolution 12:1
l
selectable °C and °F
l
low battery indicator
l
HOLD function
l
Min/Max/Mean/Max-Min function
l
auto power off after 10 sec.
l
Socket for mounting on a stand
l
laser sight
l
dual LCD display with backlight
l
measuring range up to 500°C
l
optical resolution 8:1
l
selectable °C and °F
l
Min/Max/Mean/Rel function
l
acoustical indication of set
l
High/Low threshold values
l
HOLD function
l
TAMB function
(ambient temperature measurement)
l
low battery indicator
l
auto power off
l
Specifications:
Display
Temperature/
Spectral range
Resolution
Repeatability
Accuracy
Typical distance to measured point
Emissivity
Weight:
Dimensions:
Supply volt.
: LCD with backllight
: -50°C...+500°C
: 8-14µm
: 0,2°C
: ± 1°C or ±1% of readout
: ±3,5°C or ±2%
: up to 1,5m
: fixed 0,95
: 196 g (with battery )
: 179 x 162 x 47 mm
: 9V 6F22 battery
Standard equipment:
l
Features:
backlit LCD
automatic power-off
l
HOLD function
l
MIN/MAX/MEDIUM function
laser sight
l
adjustable emissivity
l
selection of Celsius or Fahrenheit units
l
low battery indicator
l
l
Specifications:
Display
Temperature
Specifications:
Display
Optical resolution
Emissivity value
Non-contact temperature measuring range
Non-contact temperature measuring resolution
Weight
Dimensions
Power supply
: LCD
: 12:1
: 0,1...1
: -20...550°C
: 0,1°C
: 125 g
: 97 x 43 x 160 mm
: 1 battery 9V
AX-T903 Appliance
Testers with
LCD Display
Features:
Features:
RCD's test up to 30 mA
polarisation indicator
l
AC/DC voltage indicator
l
low impedance test
l
phase sequence test
l
autotest
l
torch function
l
voltage detection without battery
l
continuity test
LCD display with bargraph
phase sequence test
l
continuity test
l
low impedance test
l
display with backlight
l
polarisation indicator
l
AC/DC voltage indicator
l
low battery indicator
l
torch function
l
l
Display
Measurement range
low impedance test
l
test RCDs up to 30mA
l
polarization indicator
l
: LED bargraph indicating
7 voltage levels
: 6/12/24/50/120/230/400V
: 6/12/24/50/120/230/400V
Response time
Continuity test
Input impedance
Frequency
Dimensions
Weight
Supply
Safety
Protection degree
: 0...60Hz
: IP64
: 240 x 78 x 40 mm
: 237 g

test leads set

soft carrying case
Specifications:
Display
DC voltage measuring range
AC voltage measuring range
Bandwidth for AC voltage
measurements
Sealing
Dimensions
Weight without batteries
10
l
l
Specifications:
Specifications:
Features:
Standard equipment:

soft carrying case
AX-T902 Appliance
Testers

soft carrying case
AX-T901
Electrical Testers
Spectral range
Emissivity
Dimensions
Weight
Supply volt
: LCD, white backlight, 4 digits
: -20°C to 537°C
-4°F to +999°F
: 8 - 14 µm
: 0,10 to 1,00 resolution 0,01
: 162 x 56 x 190 mm
: 260 g (with battery )
: 9V 6F22 battery
: bargraph with 8 voltage
thresholds
: 12/24/36/50/120/230/400
690V AC/DC
: < 0,1 s
: R < 300 kΩ
: ≤ 6 kΩ
: 50 Hz / 60 Hz
: 240 x 78 x 40 mm
: 237 g
: 1,5V LR03 (AAA), 2 batteries
: Cat. III 1000V, Cat. IV 600V
: IP64
Standard equipment:
Display
Sampling rate
Measurement ranges
: LCD 3,5 digits (1999)
: 2 ~ 3 x / sec.
: 1V...6V/12V/24V/50V/120V/230V
/400V/690V AC/DC
Threshold of auto switch on : 4,5 V
Input current
: ≤ 3 mA at 690 V AC
: ≤ 2,5 mA at 690 V DC
Input impedance
: ≤ 1 MΩ
Continuity test
: R < 300 kΩ
Dimensions
: 240 x 78 x 40 mm
Weight
: 237 g
Supply
: 1,5 V LR03 (AAA), 2 batteries
Safety
: Cat. III 1000V, Cat. IV 600V
Protection degree
: IP64
Standard equipment:

test leads set

soft carrying case
www.axiomet.eu
AX-7530 Infrared Thermometers with Adjustable
Emissivity, 13:1
AX-T2400 Insulation Testers
125/250/500/1000V to
4000Mohm
AX-TI220 Multimeters
with Insulation Resistance
Tester to 1kV
Features:
Features:
Features:
l
dual LCD display with backlight
l
large, dual LCD with backlight
l
laser sight
and bargraph
l
HOLD function
(holds measurements result
on the display)
l
Min/Max function
l
auto ranging
l
continuity test with buzzer
l
measuring voltage lock
l
overvoltage protection
l
display zeroing function
l
auto power off
l
low battery indicator
l
anti-stroke function (holster)
l
optical resolution 13:1
l
temperature resolution
0,1ºC (0,1ºF)
l
HOLD function
l
Selectable ºC and ºF
l
emissivity adjustment
from 0,1 to 1,0
l
contact temperature measurement
with use of K-type thermocouple
l
memory of 20 measurements
l
auto power off
l
low and high temperature
alarm function
l
continuous measurement lock
l
over range indicator
l
laser indicator power off function
l
low battery indicator
l
protective holster
l
MAX, MIN, DIF, AVG record function enabling display of maximum,
minimum and average values as well as the difference between
MAX and MIN values
Specifications:
Display
Sampling rate
Testing voltage
Specifications:
Display
IR temperature range
K- type temperature probe
Display resolution
Optical resolution
Spectral range
Emissivity
Dimensions
Weight
Supply
: LCD with backlight
: -32ºC to 480ºC (-25,6ºF to 896ºF)
: -50ºC to 1370ºC (-58ºF to 2498ºF)
: 0,1ºC/0,1ºF
: 13:1
: 8-14μm
: from 0,10 to 1,00/resolution 0,01
: 100 x 56 x 230mm
: 290g
: 9V 6F22 battery (not included)
DC voltage
AC voltage
Resistance
Continuity test
Dimensions
Weight
Supply
Standard equipment:
: LCD
: 2,5 x/s
: 1000V for range 1MΩ...4000MΩ
: 500V for range 0,5MΩ...4000MΩ
: 250V for range 0,25MΩ...4000MΩ
: 125V for range 0,125MΩ...4000MΩ
: 1V...1000V
: 1V...750V
: 0,125MΩ...4MΩ, 40MΩ, 400MΩ, 4000MΩ
: acoustic signal for R < 35 Ω
: 200 x 92 x 50 mm
: 700 g (with batteries)
: 1,5 V LR06 (AA), 6 batteries
Standard equipment:
l
K-type temperature probe
l
large, backlit LCD
l
auto and manual ranging
l
automatic power-off
l
wide test voltages selection
l
HOLD function
l
MIN/MAX function
l
overload protection
l
measures frequency,
capacitance and temperature
l
measures true RMS AC/DC
l
diode and continuity
test with buzzer
Specifications:
Test voltage
: 50VDC (for 0,05M...50MΩ range)
: 100VDC (for 0,1M...100MΩ range)
: 250VDC (for range 0.25M...250MΩ)
: 500VDC (for range 0.5M...500MΩ)
: 1000VDC (for range 1M...2GΩ)
: 0,05M...0,1M/0,25M/
Insulation resistance
measuring ranges
/0,5M/1M/10M/100M/2GΩ
Type of display used
: LCD (5000)
AC voltage measuring range
: 0,1m...500m/5/50/500/1000V
Bandwidth for AC voltage
measurements
: 40Hz...400Hz
DC voltage measuring range : 0,1m...500m/5/50/500/1000V
AC current measuring range
: 0,1µ...500µ/5000µ/50m/500mA
DC current measuring range
: 0,1µ...500µ/5000µ/50m/500mA
Resistance measuring range
: 0,1...500/5k/50k/500k/5M/50MΩ
Capacitance measuring range : 0,01n...50n/500n/5µ/50µ/500µ/1000µF
Frequency measuring range
: 0,001...5/2MHz
Temperature measuring range : -40...537°C
Temperature measurement resolution
: 0.1°C
Diode test
: 0,7mA, 2,5V
Continuity test
: acoustic signal for R<25Ω
Pollution degree
:2
Body dimensions
: 200 x 100 x 40 mm
Weight with battery
: 560 g
Power supply
: 6 batteries 1,5V LR03 (AAA)
Safety
: EN61010 1000V CAT III
Standard equipment:
l
test leads set
l
test probes
l
hard carrying case
l
2 crocodile clips
l
case
l
temperature probe
AX-7550 Multifunctional
Video Pirometers up to 1600°C
AX-7531 Infrared Thermometers with Adjustable
Emissivity, 20:1
Features:
Specifications:
Type of display used
Non-contact temperature
measuring range
Non-contact temperature
measuring resolution
: LCD TFT 2,2" (320x240) colour
: -50...1600°C
: 0,1 (within -50...1000°C range),
: 1°C (within 1000...1600°C range)
: 0,1...1
: 50:1
Emissivity value
Optical resolution
Temperature measuring range for
contact temperature measurement : -50...1370°C
Air humidity measurement
: 0...100% RH
Dimensions
: 125 x 58 x 205 mm
Weight without batteries
: 494 g
Power supply
: built-in battery
Standard equipment:
l
USB cable;
l
carrying case;
l
drop-like K-type temperature probe
Features:
l
backlit LCD
l
automatic power-off
l
measures temperature
withoutleads or by means
of K-type probe
l
HOLD function
l
MIN/MAX/MEDIUM function
l
measures dew-point
l
USB interface
l
date and time setting possibility
constant measurement
(interlocking of measurement release button)
l
settable MIN/MAX alarm thresholds
l
memory built-in
l
ambient temperature measurement
l
saving in JPEG, 3GP formats
l
temperature difference measurement
l
data logger function
l
laser sight
l
adjustable emissivity
l
option of memory card connection SD(8GB)
www.axiomet.eu
l
double LCD display with backlight
l
double laser sight
l
optical resolution 20:1
l
HOLD function
l
selectable ºC and ºF
l
emissivity adjustment from 0,1 to 1,0
l
maximum value display function
l
low and high temperature alarm
l
continuous measurement lock
l
over range indicator
l
laser indicator power off function
l
auto power off
l
low battery indicator
l
protective holster
Specifications:
Display
Temperature range
Display resolution
Spectral range
Emissivity
Dimensions
Weight
Supply
: LCD with backlight
: -50ºC to 800ºC (-58ºF to 1472ºF)
: 0,1ºC/0,1ºF
: 8-14μm
: from 0,10 to 1,00 / resolution 0,01
: 146 x 104 x 43mm
: 163g
: 9V 6F22 battery
11
AX-B100 Borescopes
AX-B250 Video Borescopes with
17mm LCD 3,2"
Camera
Features:
l
inspection camera
Features:
l
USB interface
l
built-in LEDs for measurement spot illumination

LCD 3,2" TFT
Specifications:
320x240 display
Probe diameter
Cable length
Sealing
Operating temperature
Weight
Dimensions
Power supply
: 12 mm
:1m
: IP67
: 0...45°C
: 362 g
: 266 x 73 x 80 mm
: from USB port

pictures and video
Standard equipment:

USB cable

fixtures: mirror, hook, magnet

video cable
image taking

video image refresh 30 frames/s

built-in 4 illuminating diodes
with the adjustable backlight

pictures and video
image record
AX-B150 Borescopes

image rotation function

video output
Features:

USB 2.0 interface
l
USB interface

date and time tag
l
built-in LEDs for measurement spot illumination

auto power off function
l
low battery indicator
l
TV-Out (NTSC)
Specifications:
Display
Probe diameter
Cable length
Sealing
Weight
Dimensions
Power supply
: LCD 2,4" (320x240)
: 12 mm
:1m
: IP67
: 360 g
: 266 x 95 x 66 mm
: 4 batteries 1,5V LR6 (AA)
Standard equipment:

USB cable

fixtures: mirror, hook, magnet

video cable
AX-B350 Borescopes
Features:
l
automatic power-off
l
USB interface
l
date and time setting possibility
l
flexible cord
Specifications:
Display
Focus range
Cable length
Camera diameter
Number of colors
Video camera format
Pictures format
Storage pictures format
Built-in flash memory
SD card
Flash card
TV output
Dimensions
Weight
Supply
: LCD 3,2" TFT 320x240
: 5-15cm
: 1m
: 17mm
: 24
: MPEG4/3GP/AVI/ASF
: JPEG, JPG
: JPG (640x480)
: 65M
: MAX 32GB
: MAX 8GB
: PAL/NTSC
: 240 x 100 x 160 mm
: 65 g (with battery)
: 3,7V,2000mA/h Li battery
l
TV-Out (PAL/NTSC)
Standard equipment:
l
JPEG, AVI recording format
l
built-in LEDs for measurement spot illumination
l
digital zoom x 4
l
built-in 64MB memory
Standard equipment:

USB cable

fixtures: mirror, hook, magnet

software

video cable
AX-BC3 Extension Cables for
AX-B250 Video
Borescopes
Features:
l
Test accessories type
l
Probe dia.
l
Cable len.
l
Application
12
Specifications:
Display
: LCD 3.5" (320x240)
Probe diameter
: 12 mm
Cable length
:1m
Sealing
: IP67
Operating temperature : 0...45°C
Weight
: 405 g
Dimensions
: 270 x 75 x 100 mm
Power supply
: 4 batteries 1,5V LR6 (AA)
AX-BC6MM-1 Extension Probes
for AX-B250 Video
Borescopes
Features:
: extension cable for
video borescope
: 17 mm
:3m
: AX-B250
l
Test accessories
l
Application
l
Probe diameter
l
Cable length

battery

USB cable

charger

video cable
Optional equipment:

3 meters AX-BC3 cable for video borescope
AX-BC9MM-1 Extension Probes
for AX-B250 Video
Borescopes
Features:
: boroscope probe with camera
: AX-B250
: 6 mm
:1m
l
Test accessories
l
Application
l
Probe diameter
l
Cable length
: boroscope probe with camera
: AX-B250
: 9 mm
:1m
www.axiomet.eu
TESTER-MS6811
LAN Cable Tester
AX-C605
Series Loop
Calibrators
AX-5001 Temperature
Multimeters
with Dew-Point
Features:
l
Large LCD display with backlight
l
HOLD function
(holds measurements results
on the display)
l
Min./Max./Med. function
l
possible measurement
in Celsius and Fahrenheit degrees
l
dew-point measurement
l
auto power off
l
low battery indicator
Features:
Features:
l
automatic power-off
l
10-LED indicator
l
tests in 25% steps
l
UTP, STP cables test
l
continuity and wires configuration test
l
connections map test: discontinuity, short circuit, reversed pairs,
crossed pairs, separated pairs
l
detection of shielded and non-shielded wires
l
adaptor for carrying out tests by one person
l
low battery indicator
and at 100% of signal
Specifications:
l
24V loop supply voltage
l
low battery indicator
l
measures 0-20mA current loop
Specifications:

soft carrying case
Display
DC voltage measuring range
Voltage measuring resolution
DC current measuring range
Current measuring resolution
Voltage source
Current source
Operating temperature
Weight
Dimensions
Power supply
TESTER-MS6812
Cable Pairs
Identificator
AX-C800 Voltage
and Current
Calibrators
Specifications:
Measure cables
Dimensions
Weight
Supply
: from 0,4 m to 200 m
: 125 x 55 x 30 mm
: 125 g
: 6V 4LR44 battery
Standard equipment:
: LCD 4,5 digit (19999)
: 0...28V
: 1 mV DC
: 0...22mA
: 0.001 mA
: 0...24V
: 0...22mA
: 0...50°C
: 550 g
: 180 x 90 x 47 mm
: 2 x 1.5V AA (LR6)
Display
Sampling rate
Temperature
Humidity
Dimensions
Weight
Supply
: LCD 4 digits, backlight
: 1x/s
: 0.1°C, -10...50°C
: 0.1%RH, 0...100%RH
: 121 x 60 x 30 mm
: 180 g
: 1,5V LR03, 3 batteries (not included)
Standard equipment:

hand strip

hard case
AX-9201 Miniature
Temperature Meters
Features:
l
automatic power-off
l
HOLD function
l
MIN/MAX function
l
pointed probe made of stainless steel
l
low battery indicator
Features:
Specifications:

measure or simulate voltage
Features:

continuity test for cables and wires

detection of cable fault place

detection of tone signal in cables or wires (telephone lines)

identification of telephone line status (free, calling, busy)

wire identification in cable by means of sending single, continuous or
modulated signal

adjustable sensitivity
Specifications:
Transmitter signal frequency
Receiver signal frequency
Supply voltage
: 1,5 kHz
: 100...300 kHz
: 9V 6F22 battery (delivered separately)
Standard equipment:

soft carrying case
: -50...150°C
: 0.1°C
: 250 mm
: 51 g
: 1 battery 1,5V LR44
AX-TH05 Thermohygrometers
Specifications:
Parameters mV DC
Measurement/simulation
Resolution
Parameters V DC
Measurement/simulation
Resolution
Loop supply
Parameters mA DC
Measurement/simulation
Resolution
Supply
Dimensions
Weight
Standard equipment:

soft carrying case

test leads set with test tips

insulated clips set
www.axiomet.eu
Temperature measuring range
Temp. measur. resol.
Probe length
Weight without batteries
Power supply
in mV and V

measure or simulate current
in mA and A

current readout
in mA or % of range

power transmitters during
test using loop supply 24 V

overvoltage protection

overload protection
: 0 to 100 mV
: 0,01 mV
: 0 to 10 V
: 0,001V
: 24 V DC ± 10%
: 0 to 24 mA
: 0,001 mA
: R03, 6 batteries
: 204 x 99 x 46 mm
: 460g
Features:
l
3 level psychological comfort indicator (temperature/humidity)
l
large double LCD
l
selection of Celsius or Fahrenheit units
Specifications:
Temperature measuring range
Temperature measurement resolution
Humidity measuring range
Humidity measuring resolution
Weight
Dimensions
Power supply
: -50...70°C
: 0.1°C
: 10...99% RH
: 1% RH
: 100 g
: 105 x 105 x 15 mm
: 1 battery 1,5V LR03 (AAA)
13
AX-5003 Two-Channel
Temperature Meters with Range
-200/+1300°C
AX-C830 Thermocouple
Calibrators Type J,K,T,E,R,S,B,N
Features:
Features:
AX-5002 Pyrometers
with Embedded
Temperature Meter
Features:
l
large LCD display with backlight
l
contact or non-contact temperature
measurement
l
laser indicator
l
HOLD function (holds measurements
results on the display)
l
Min./Max/Med. function
l
possibility of measurement
in Celsius or Fahrenheit degrees
l
auto power off
l
low battery indicator
l
large LCD with backlight
l
high precision
measurements display
l
measurement and simulation
l
temperature difference
l
cooperates with
measurement
8 thermocoupletypes
J,K,T,E,R,S,B,N
l
measurement
in Celsius or Fahrenheit
l
anti-shock housing
l
socket enabling supply connection
l
HOLD function (holds measurements
results on the display)
l
Min./Max. function
l
programmable alarm
thresholds Min./Max.
l
possibility of measurement
in Celsius or Fahrenheit degrees
Specifications:
l
auto power off
l
low battery indicator
Specifications:
Display
Temperature (probe)
Temperature (non-contact)
Optical resolution
Emissivity
Dimensions
Weight
Supply
Weight
Supply
l
large LCD with backlight
l
possibility of two numeral
: LCD 4 digits
: 0.1°C, -200...1300°C
: 0.1°C, -50...300°C
: 2:1
: fixed 0,95
: 121 x 60 x 30 mm
: 180 g
: 1,5V LR03, 3 batteries (not included)
: 180 g
: 1,5V LR03, 3 batteries (not included)
Standard equipment:
Specifications:
Display
Sampling rate
Temperature (K-type thermocouple)
Temperature (J-type thermocouple)
Dimensions
Weight
Supply
: LCD 4 digits
: 1x/s
: 0.1°C, -200...1300°C
: 0.1°C, -200...1200°C
: 121 x 60 x 30 mm
: 180 g
: 1,5V LR03, 3 batteries
(not included)
Display
DC voltage
T-type thermocouple measure. range
S-type thermocouple measure. range
N-type thermocouple measure. range
R-type thermocouple measure. range
K-type thermocouple measure. range
J-type thermocouple measure. range
E-type thermocouple measure. range
Dimensions
Weight
Supply
: LCD 5 digits
: -10mV...75mV
: -200...400°C
: -20...1750°C
: -250...1300°C
: -20...1750°C
: -200...1370°C
: -200...1200°C
: -200...950°C
: 205 x 98 x 46 mm
: 472g
: 1,5V LR03, 6 batteries
(not included)
Standard equipment:
Standard equipment:

hand strip

hard case

K-type temperature probe with ball tip

hand strip

hard case

two K-type probes with ball tip

soft case

2x thermocouple K-type pin
AX-CO2-1 Temperature,
Humidity and
CO2 Meters
AX-PH01 pH and
Temperature Sensors
AX-DT100 Temperature and
Humidity Recorders
32700 Samples
Features:
l
automatic power-off
Features:
l
HOLD function
l
simulataneously measures pH and temperature
l
3-point pH buffers calibration (4, 6.8, 9.1)
l
LCD display with date
and time tag
l
humidity
Features:
l
3 level psychological comfort indicator (temperature/humidity)
l
acoustic and optical alarm
l
HOLD function
l
MIN/MAX function
l
USB interface
l
date and time setting possibility
l
backlit LCD with bargraph
Specifications:
Display
Measuring range
Measuring resolution
Measurement accuracy
Temperature measuring range
Temperature measurement accuracy
Temperature measurement resolution
Weight
Dimensions
Power supply
: double LCD
: 0...14pH
: 0,01pH
: ±0,1pH
: 0...50°C
: ±0,5°C
: 0.1°C
: 100 g
: 188 x 38 mm
: 4 batteries 1,5V LR03 (AAA)
and temperature
value record
l
sampling time from
1s to 24 hrs record
l
Min/Max function
l
measurement
in Celsius
and Fahrenheit degrees
l
memory filling tag
l
alarm function
with alarm level control
l
USB interface
l
holder for wall mounting or desktop placing
l
overflow indicator
l
selection of Celsius or Fahrenheit units
l
relay output
Specifications:
Internal temperature measuring range : -20...50°C
Humidity measuring range
: 0...100% RH
Measuring range
: 300...3000ppm ( CO2)
Sealing
: IP40
Dimensions
: 125 x 85 x 30 mm
Power supply
: 5 V DC
14
Specifications:
Display
Temperature measurement
Humidity measurement
Memory
Measurement cycle
Desired software
Dimensions
Weight
Supply
: LCD
: 0.1°...-40°C to +70°C
: 0.1%...0 to 100%RH
: 32700 cells
: 1s to 24h
: 2000/XP/Vista
: 94 x 48 x 33 mm
: 115 g
: 3.6V battery
www.axiomet.eu
AX-C850 Calibrators
for RTD Sensors
AX-2901
Optical-Mechanical
Tachometers
Features:
Features:

large, easy-to-read display LCD

calibration of
Pt10 (385), 50, 100, 200, 500, 1000, Pt100 (JIS)
thermocouples

selectable °C or °F

measurement method
2, 3 or 4-wire

optically measure rotational speed in RPM

optically determine distance 5 cm – 20 cm

mechanically measure rotational
and linear speed
AX-L230 Luxmeters,
up to 400k Lux
Features:

auto ranging

measurements memory:

large, LCD display with backlight,
Max/Min/Last

low battery indicator

set of replaceable measuring
adaptors for
various applications

Lux or Fc measurement units

Peak value measurement option

HOLD function
3,75 digits with 41-segment bargraph
(holds measurement result on display)

Max/Min value measurement

relative measurement
(for illumination changes recording)

cosine and color compensation

conforms to CIE photopic
spectral response

measurement adaptor with 1m cable

protective holster
Specifications:
Ω Measurement and Simulation
Range
: 0 Ω - 3200 Ω
Resolution
: 0,01 Ω (measurement)
: 0,1 Ω (simulation)
RTD Measurement and Simulation
Range
: -200°C to 800°C
Resolution
: 0,1°C/°F
Notes
: Pt10 (385)
: Pt50 (385)
: Pt100 (385)
Range
: -200°C to 630°C
Resolution
: 0,1°C/°F
Thermocouples
: Pt200 (385)
: Pt500 (385)
: Pt1000 (385)
: Pt100 (JIS)
Max voltage
: 30V
Operating temperature : -10°C to 55°C
Supply
: 1,5V, 6 batteries
Dimensions
: 205 x 98 x 46 mm
Weight
: 472 g
Standard equipment:
Specifications:
Display
: LCD 5 digits (99999 max)
Sampling rate
: 1sec.
Optically measure rotational speed
Range
: 6 – 99999 RPM
Mechanically measure rotational speed (contact method)
Range
: 1 – 19999 RPM
Mechanically measure linear speed
Range
: 0,1 – 1999,9 RPM
: 0,3 – 6560 feet/min
Dimensions
: 217 x 84 x 43 mm
Weight
: 265 g (with batteries)
Supply
: 1,5 V type LR6, 4 batteries (not included)
Specifications:
Standard equipment:
Display

hard case

reflective tape 200 mm long

set of measurement adaptors
Measurement ranges
(circular 32mm of diameter, conical, funnel-type)

soft carrying case

2 measuring leads sets

1 insulated clips set
Resolution
Spectral accuracy
Cosine response
Dimensions
Weight
Supply
: LCD, 3,75 digits (3999)
: 41-segment bargraph
: 40lx/400lx/4klx/40klx/400klx
: 40fc/400fc/4000fc/40kfc
: 0,01 lx/0,01fc
: CIE Vλ function f1≤6%
: f2' ≤ 2%
: 203 x 75 x 50 mm
: 280 g
: 9V 6F22 battery
AX-DG2010AF Function Generators
Features:

arbitrary waveform

waveforms: sine, rectangle, ramp, pulse, noise

modulation - AM, FM, PM, ASK, FSK, PSK

USB interface
Specifications:
Waveform frequency range:
- range: 1µHz...10MHz (rectangular waveform),
- range: 1µHz...10MHz (sinus waveform),
- range: 1µHz...300kHz (ramp waveform),
- range: 1µHz...300kHz (triangle waveform),
- range:500µHz...5MHz (pulse waveform)
Vertical resolution
: 14 bit
Memory record length
: 16kpts/ch
Sweep mode period
: 1m...500s
www.axiomet.eu
Rectangular waveform
parameters rise/fall time
Number of channels
Output parameters impedance
Dimensions
Weight
Power supply
: <12ns
:2
: 50Ω
: 105 x 281 x 229 mm
: 2.6 kg
: 100...240VAC 50/60Hz
Standard equipment:

USB cable

software

mains cable
15
AX-DS1022C7 Digital
Oscilloscopes
AX-DS1100CFM
Digital Oscilloscopes
with 7" LCD
Standard equipment:

2 voltage probes with 1:1/10:1 divider

USB cable

software
Features:
Features:
Specifications:

digital filter function

Holdoff function: 100ns...1,5s

Pass/Fail function

value averaging function with maximal 256 runs

colour LCD with adjustable contrast

mathematical functions: addition, subtraction, division, multiplication
and FFT

measurements by means of cursors

displays input waveform and FFT on divided screen

records input waveform

trigger modes: slope (negative, positive), impulse width, video signal

integrated FFT with algorithm selection: Hamming, Hanning,
Blackman, Rectangular

memory for 20 settings

colour 7" LCD with contrast regulation

20 measurement memory

RS232 interface

USB interface
Band
Type of display used
Sampling
Number of channels
Interface
Input impedance
Input sensitivity
Input coupling
Trigger source
Trigger modes
Trigger coupling
Horizontal accuracy
Time base
Max. input voltage
Vertical resolution
Memory record length
Rise time
Sampling
Weight
Power supply
Overall dimensions (W x D x H)
AX-1803D Low Power
Laboratory Power Supply
Units (PSU)
and FFT

measurements by means of cursors

X-Y operation mode

displays input waveform and FFT on divided screen

records input waveform

trigger modes: slope (negative, positive), impulse width, video signal

integrated FFT with algorithm selection: Hamming, Hanning,
Blackman, Rectangular

memory for 20 settings

RS232 interface

USB interface
Standard equipment:

2 voltage probes with 1:1/10:1 divider

USB cable

software
AX-3005D-1 Single Output
Laboratory Power Supply
with LCD
Features:
Specifications:
Display
Output voltage DC
Output current DC
Line regulation
Load regulation
Noise and ripple
Mains supply
Dimensions
Weight
: ≤100MHz
: LCD 7" (480x234)
: 1Gsps (in real time),
: 50Gsps (in equivalent time)
:2
: RS232; USB
: 1MΩ/14pF
: 2mV/div...10V/div
: AC, DC, GND
: CH1, CH2, external signal, supply
voltage source
: automatic, normal, single
: AC, DC, lowpass, highpass
: ±0.01%
: 2,5n...50s/div
: 400 V
: 8 bit
: 1Mpts/ch
: 3,5ns
: 1Gsps (in real time),
: 50Gsps (in equivalent time)
: 2.4 kg
: 100...240VAC, 45...440Hz
: 399 x 110.5 x 148.5 mm

automatically measures 32 parameters

digital filter function

value averaging function with maximal 256 runs

colour LCD with adjustable contrast

mathematical functions: addition, subtraction, division, multiplication
: LCD 2 x 3,5 digits
: 0-18 V
: 0-3 A
: ≤0,01% ±1 mV
: ≤0,2% ±1 mA
: ≤1 mVrms
: 230 V AC ± 10%
: 206 x 153 x 106 mm
: about 4 kg
l
2 LCD displays 2 x 3,5 digits
l
precise adjustment
of current and voltage
l
short-circuit protection
l
overload protection
l
protection against connection
to the PSU's output a voltage
with reverse polarisation
l
simultaneous readouts
of voltage and current
l
efficient current and voltage regulation factor
Features:
l
2 LEDs
l
cooled by temperature-controlled fan
l
simultaneous voltage and current readout
AX-3005DS 1 Channel
Adjustable Power
Supplies
l
voltage and current stepless adjustment
l
constant voltage or constant current operation
l
overload protection
l
short circuit protection
l
protection against connection of reverse polarisation
voltage to the PSU output
Features:
l
coarse and precise voltage and current adjustment
l
simultaneous voltage and current readout
l
voltage and current stepless adjustment
l
overload protection
l
coarse and precise voltage and current adjustment
Specifications:
Display
Number of channels
Output voltage
Output current
Voltage stabilisation
Current stabilisation
Voltage (regulated) ripple and noise
Dimensions
Weight
Power supply
16
: 2x LCD 3 digits
:1
: 0...30 V DC
: 0...5 A
: ≤1% + 10mV
: ≤1% + 5mA
: ≤100mVp-p
: 80 x 160 x 205 mm
: 1.5 kg
: 230VAC 50/60Hz
l
memory for 4 settings
Specifications:
Display
Number of channels
Output voltage
Output voltage resolution
Output current
Output current resolution
Voltage stabilisation
Current stabilisation
Dimensions
Weight
Power supply
: 2x LED 4 digits
:1
: 0...30 V DC
: 10 mV
: 0...5 A
: 1 mA
: ≤0,01% + 2mV
: ≤0,1% ± 10mA
: 110 x 156 x 260 mm
: 4.5 kg
: 100...240V 50/60Hz
Standard equipment:
l
mains cable
www.axiomet.eu
AX-DS1062CFM Digital
Oscilloscopes with 7" Display
Features:

7" colour display with contrast regulation

2 channels

sampling rate to 1GSa/s

automatic measurement of 32 parameters

memory of runs to 2Mpts

measurement with cursors

mathematic and FFT functions

tripping kinds with slope (accruing, descending), with impulse
Specifications:
Band
Display
Number of channels
Input impedance
Input coupling
Trigger source
Trigger modes
Trigger coupling
Input sensitivity
Time base
Max. input voltage
Vertical resolution
Memory record length
Rise time
Sampling
Weight
Power supply
Overall dimensions (W x D x H)
: ≤25MHz
: LCD 7" (480x234)
:2
: 1MΩ/17pF
: AC, DC, GND
: CH1, CH2, external signal,
: supply voltage source
: automatic, normal, single
: AC, DC, lowpass, highpass
: 2mV/div...5V/div
: 25n...50s/div
: 400 V
: 8 bit
: 32kpts
: 14ns
: 500Msps (in real time),
: 50Gsps (in equivalent time)
: 2.5 kg
: 100...240VAC 50/60Hz
: 323 x 135 x 157 mm
AX-6002P Programmable
Power Supply
Units
width, with video signal

memory of runs and settings

USB interface
Specifications:
Band
: ≤60MHz; ≤40MHz
Display
: LCD 7"(480x234)
Number of channels
:2
Memory
: 2Mpts.
Input impedance
: 1MΩ/14pF
Input coupling
: AC, DC, GND
Tripping source
: CH1, CH2, external signal supply source
Tripping modes
: automatic, regular, single
Tripping coupling
: AC, DC, low-pass, high-pass
Time base
: 5...50s/div.; 10n...50s/div.
Input voltage max [V] : 400
Vertical resolution [lines] : 8
Accrual time
: 5,8ns; 8,8ns
Sampling rate
: 1GSa/s (in real time); 500MSa/s (in real time)
: 50GSa/s (in equivalent time)
: 25GSa/s (in equivalent time)
Weight [kg]
: 2,4
Supply
: 100...240VAC
Dimensions
: 148,5x399x110,5
Standard equipment:

2 voltage probes with 1:1/10:1 divider

USB cable

software
AX-3005DS, AX-3010DS 1
Channel Adjustable Switching
Power Supplies
AX-3005DLS Single Channel
Linear Power Supplies
Features:
Features:
Features:
l
cooled by temperature-controlled fan
l
RS232 interface
l
USB interface
l
simultaneous voltage and current readout
l
voltage and current stepless adjustment
l
constant voltage or constant current operation
l
overload protection
l
overvoltage protection
l
protection against connection of reverse polarisation voltage
to the PSU output
l
double LED
l
memory for 4 settings
Specifications:
Display
Number of channels
Output voltage
Output voltage resolution
Output current
Output current resolution
Voltage stabilisation
Current stabilisation
Voltage (regulated) ripple and noise
Dimensions
Weight
Power supply
Pollution degree
: 2x LED 4 digits
:1
: 0...60 V DC
: 10 mV
: 0...2 A
: 1 mA
: ≤0,01% + 2mV
: ≤0,1% + 5mA
: ≤1mVrms
: 98 x 193 x 215 mm
: 3 kg
: 100...240V 50/60Hz
:2
l
simultaneous voltage and current readout
l
simultaneous voltage and current readout
l
voltage and current stepless adjustment
l
voltage and current stepless adjustment
l
overload protection
l
overload protection
l
coarse and precise voltage and current adjustment
l
coarse and precise voltage and current adjustment
Specifications:
Specifications:
Display
Number of channels
Current stabilisation
Voltage stabilisation
Voltage (regulated) ripple and noise
Weight
Dimensions
Power supply
Symbol
AX-3005DS
AX-3010DS
Output voltage
[V DC]
0...30
0...30
: 2x LCD 3 digits
:1
: ≤1% + 5mA
: ≤1% + 10mV
: ≤200mVp-p
: 1:.5 kg
: 85 x 160 x 205 mm
: 230 V AC 50/60 Hz
Display
Number of channels
Output voltage
Output current
Voltage stabilisation
Voltage (regulated) ripple and noise
Dimensions
Power supply
: 2x LCD 4 digits
:1
: 0...30 V DC
: 0...5 A
: ≤0,01% + 5mV
: ≤1mVp-p
: 85 x 160 x 260 mm
: 110/230V 50/60Hz
Output current
[A]
0...5
0...10
Standard equipment:
l
USB cable
l
software
l
mains cable
www.axiomet.eu
17
AX-3003L-3, AX-3005L-3
3-channel Linear Laboratory
Power Supplies
AX-3003D and AX-3005D
Single Output
Laboratory Power Supply Units with LCD Display
Features:
l
2 LCD displays 2 x 3,5 digits
l
precise adjustment of current and voltage
l
short-circuit protection
l
overload protection
l
protection against connection
to the PSU's output a voltage with reverse polarisation
l
simultaneous readouts of voltage and current
l
very good regulation factor for current and voltage
Features:
Specifications:
l
2 regulated blocks that can operate in constant current
or constant voltage modes and as serial,
parallel or independent PSUs
l
4 LED displays
l
cooled by temperature-controlled fan
l
simultaneous voltage and current readout
l
voltage and current stepless adjustment
l
programmable current limiter
l
overload protection
l
short circuit protection
Specifications:
Number of channels
Display
Output voltage resolution
Output current resolution
Voltage (regulated) ripple and noise
Symbol
Output voltage [V DC]
Output current [A]
Output voltage 2 [V DC]
Output current 2 [A]
Output voltage 3 [V DC]
Output current 3 [A]
Dimensions [mm]
Weight [kg]
Power supply
:3
: 4x LED 3,5 digit
: 0.1 V
: 0.01 A
: ≤1mVrms
AX-3003L-3
0...30
0...3
0...30
0...3
5
3
260 x 160 x 310
10
220V 50 Hz
AX-3005L-3
0...30
0...5
0...30
0...5
5
3
260 x 160 x 360
13
220V 50 Hz
Display
Output voltage DC
Output current DC AX-3003D
DC AX-3005D
Line regulation
Load regulation
Noise and ripple
Mains supply
Dimensions
Weight
AX-3003D
AX-3005D
: LCD 2 x 3,5 digits
: 0-30 V
: 0-3 A
: 0-5 A
: ≤0,01% ±1 mV
: ≤0,2% ±1 mA
: ≤1 mVrms
: 230 V AC ± 10%
: 291 x 158 x 136 mm
: about 5 kg
: about 6 kg
AX-3003D-3 and AX-3005D-3
Triple Output Laboratory
Power Supply Units with LCD Display
Features:
Specifications:
l
readable LCD displays 4 x 3,5 digits
l
short-circuit protection
l
programmable overload protection
l
simultaneous readouts of voltage and current
l
two controlled sections which may operate in current or voltage
Display
Output voltage DC
Output current DC
: 4 x LCD 3,5 digits
: 2 x 30 V
: 2 x 3 A (AX-3003D-3) and
2 x 5 A (AX-3005D-3)
:5V/3A
: ≤0,01% ±1 mV
: ≤0,2% ±1 mA
: ≤1 mVrms
: 230 V AC ± 10%
: 365 x 265 x 164 mm
: about 10 kg (AX-3003D-3)
about 13 kg (AX-3005D-3)
stabilisation mode, or as in series, parallel or independent power
supplies - „TRACKING MODE" option
l
single output with fixed voltage 5 V / 3 A
l
very good regulation factor for current and voltage
Fixed output DC
Line regulation
Load regulation
Noise and ripple
Mains supply
Dimensions
Weight
AX-3005DBL Single Output
Laboratory Power
Supplies
AX-3020L Regulated DC
High Power Supply
AX-3005DBL-3 Triple Output
Power Supplies
Features:
Features:
Features:
l
simultaneous voltage and current readout
l
simultaneous voltage and current readout
l
simultaneous voltage and current readout
l
voltage and current stepless adjustment
l
voltage and current stepless adjustment
l
overload protection
Specifications:
Number of channels
Display
Output voltage
Output current
Voltage (regulated) ripple and noise
Voltage output
Voltage stabilisation
Current stabilisation
Weight
Power supply
Standard equipment:
l
test leads
l
mains cable
18
l
robust construction with excellent reliability
:1
: 2x LCD 3,5 digit
: 0...30 V DC
: 0...5 A
: ≤0,5mVrms
: 5V DC/3A
: ≤0,02% + 2mV
: ≤0,02% + 2mA
: 6 kg
: 230VAC 50/60Hz
l
double LED
Specifications:
Display
Number of channels
Output voltage
Output current
Voltage (regulated) ripple and noise
Dimensions
Weight
Power supply
: 2x LED 4 digits
:1
: 0...30 V DC
: 0...20 A
: ≤1mVrms
: 265 x 140 x 360 mm
: 14 kg
: 230VAC 50/60Hz
l
voltage and current stepless adjustment
Specifications:
Number of channels
Display
Output voltage
Output current
Output voltage 2
Output current 2
Voltage output
Voltage (regulated) ripple and noise
Voltage stabilisation
Current stabilisation
Weight
Power supply
:3
: 4x LCD 3,5 digit
: 0...30 V DC
: 0...5 A
: 0...30 V DC
: 0...5 A
: 5V DC/3A
: ≤0,5mVrms
: ≤0,02% + 2mV
: ≤0,02% + 2mA
: 16 kg
: 230VAC 50/60Hz
Standard equipment:

test leads

mains cable
www.axiomet.eu
AX-CP-06 Miniature
Clip-on Probes with
0.6 mm Socket
Features:
l
Test accessories
l
Clip-on probe type
l
Grip capacity
l
Connection
l
Rated voltage
l
Rated current
l
Contact material
l
Contact plating
l
Insulator material
l
Colour
AX-CP-05 2mm Test Probe
Tips with 4mm Socket
Features:
: clip-on probe
: pincers type
: max. 2 mm
: socket with 0.6 mm stud
: 60 V DC
:2A
: brass
: gold plated
: polyamide
: AX-CP-06-B black
AX-CP-06-R red
AX-CP-04 Clip-on Probe
with 4mm Banana
Socket
l
Test accessories
l
Overall length
l
Blade diameter
l
Rated current
l
Connection
l
Insulator material
l
Conform to the norm
l
Colour
AX-TL-4B1 Test Lead with 4mm
Banana Plugs
Features:
: test probe
: 103 mm
: 2 mm
: 10 A
: 4 mm socket
: polyamide
: IEC 1010 1000V Cat II
: AX-CP-05-B black
AX-CP-05-R red
AX-CP-02 Test Probes
with the Fuse Socket
Structure
Type
Conform to the norm
Cable length
Symbol
Features
AX-TL-4B1-B
AX-TL-4B1-BL
AX-TL-4B1-R
AX-TL-4BS1-B
AX-TL-4BS1-R
flexible
flexible
flexible
silicone
silicone
: 4mm straight banana plug 4mm straight banana plug
: with 4 mm axial socket; with cover
: IEC 1010 600V Cat II
:1m
Wire crosssection [mm2]
1
1
1
2,5
2,5
Rated current
[A]
19
19
19
32
32
Colour
black
blue
red
black
red
AX-TLP-001
Test Leads Set
Features:
l
Test accessories
l
Features
Features:
l
Test accessories
l
Clip-on probe type
l
Connection
l
Insulator material
l
Contact material
l
Contact plating
l
Grip capacity
l
Rated current
l
Overall length
l
Conform to the norm
l
Colour
: clip-on probe
: with puncturing point
: 4 mm socket
: polyamide
: brass/steel
: nickel plated
: max. 6 mm
: 10 A
: 159 mm
: IEC 1010 1000V Cat III
: AX-CP-04-B black
: AX-CP-04-R red
l
Rated current
l
Connection
l
Overall length
l
Conform to the norm
l
Insulator material
l
Contact material
l
Colour
: test probe
: fuse holder
: 20 A
: 4 mm socket
: 132.5 mm
: IEC 1010 1000V Cat III
: polyamide
: brass
: black AX-CP-02-B
: red AX-CP-02-R
AX-CP-01-SET
Measuring Tips Set
Socket 4mm 10A
AX-CP-03 Clip-on Probes
with Puncturing Point
Features:
l
4mm angled banana plug - test probe
l
type : cap protecting from short circuits during tests
l
pointed tip that can be plugged to 4mm socket
l
rated current : 10 A
l
cable length : 1.2 m
l
conform to the norm : IEC 1010 for Cat. III 1000V
l
plug dimensions : Ø4 mm
l
colour : red and black
l
kit contents : 2x test lead
AX-TLP-001T Test Leads
Set 1,2m 4mm
Banana/Test Tip
Features:
l
construction: 4 mm banana socket - pointed tip
l
rated current: 10A
l
total length: 123mm
l
compliant with the Norm IEC1010 Cat. III 1000V, Cat. V 600V
l
colour: black and red
Features:
l
Test accessories
l
Clip-on probe type
l
Connection
l
Rated current
l
Contact material
l
Insulator material
l
Overall length
l
Max. wire diameter
l
Conform to the norm
l
Colour
l
set contents: 2x measuring tip
: clip-on probe
: with puncturing point
: 4 mm socket
: 10 A
: brass/steel
: polyamide
: 136 mm
: 4 mm
: IEC 1010 1000V Cat III
: AX-CP-03-B black
AX-CP-03-R red
AX-CR-02-SET Crocodile
Clamps with 4 mm
Socket
Features:
l
4mm banana plug - 2mm test tip
l
nominal current: 10A
l
leads length: 1,2 m
l
compliant with IEC1010 Cat. III 1000V
l
colour: black and red
Features:
l
set contents: 2x test lead
l
lead insulation material: PVC
l
4 mm banana socket
l
rated current: 5A
l
colour: black and red
l
set contents: 2x crocodile type measuring tip
l
insulation material: PVC
www.axiomet.eu
19
AX-TL-BNC-BNC Test Leads
with BNC Plug
- BNC Plug
AX-TLP-TW-01
SMD Test Tweezers
with Banana Plugs
AX-TLP-005 Leads Set 1,2m
4mm Banana/Needle
Measuring Tips
Specifications:
Features:
l
4mm banana angled
plug - needle probe
l
nominal current: 10A
l
leads length: 1,2 m
l
compliant
with IEC1010 Cat. III 1000V
l
colour: black and red
l
set contents: 2x test lead
l
lead insulation material: PVC
Structure
Rated current
Cable length
Colour
Safety
: BNC plug - BNC plug
:3A
:1m
: black
: EN61010 150V CAT II,
EN61010 500V CAT I
Features:
l
4mm angled banana plug - SMD test tweezers
l
cable length : 0.4 m
AX-TL-BNC-4BP2 Test Leads
with Insulated BNC Plug
and Two 4 mm Plugs
l
colour : black
AX-P1, AX-58P, AX-58P1 - Soft
Carrying Cases for
Multimeters
AX-TLP-002 Test
Leads with Two
Banana Plugs
Features:
l
4mm straight banana plug
- 4mm straight banana plug
l
rated current : 10 A
l
cable length : 1.2 m
l
conform to the norm : IEC 1010 for Cat. III 1000V Cat. IV 600V
l
plug dimensions : Ø4 mm
l
colour : red and black
l
kit contents : 2x test lead
AX-TLP-003 Test Leads Set
1,2m Banana Straight:
Plug/Socket
Specifications:
Structure
Rated current
Cable length
Colour
Safety
: 2x 4 mm banana plug - BNC plug
:3A
: 1.2 m
: red and black
: EN61010 150V CAT II, EN61010 500V CAT I
AX-TL-BNC-CH2 Test Leads
with Insulated BNC Plug
and Two Grippers
AX-P1
l
Designed for types : AX-18B and AX-19
l
Dimensions
: 230 x 130 x 49 mm
l
Material
: fabric
Features:
l
4mm banana plug straight
- 4mm banana
socket straight
l
nominal current: 10A
l
leads length: 1,2 m
l
compliant with IEC1010 Cat. III 1000V
l
colour: black and red
l
ste contents: 2x test lead
l
lead insulation material: PVC
AX-TLS-001 Silicone Test
Leads with Angled
Banana Plugs
Specifications:
Structure
Rated current
Cable length
Conform to the norm
Colour
AX-58P
: 2x hook clip-on probe - BNC female plug
:3A
: 1.2 m
: IEC 1010 500V Cat I
: red and black
l
Designed for types : AX-582B, AX-585B, AX-588, AX-588B
l
Dimensions
: 210 x 120 x 45 mm
l
Material
: fabric
AX-TLS-002 Silicone Test
Leads with Angled Banana
Plugs
AX-58P1
l
Designed for types : AX-582B, AX-585B, AX-588, AX-588B
l
Dimensions
: 185 x 120 x 49 mm
l
Material
: fabric
Specifications:
Kit contents : 2x test lead
Structure
: 4mm angled banana plug
- test probe
Rated current : 10 A
Wire insulation material : silicone
Cable length
:1m
Wire cross-section
: 0.75 mm2
Conform to the norm : IEC 1010 1000V Cat III
Plug dimensions
: Ø4 mm
Colour
: red and black
20
Specifications:
Kit contents
Structure
Rated current
Cable length
Wire cross-section
Wire insulation material
Conform to the norm
Plug dimensions
Colour
: 2x test lead
: 4mm angled
banana plug
- test probe
: 10 A
:1m
: 0.75 mm2
: silicone
: IEC 1010 1000V Cat III
: Ø4 mm
: red and black
Distributor
Transfer Multisort Elektronik
Łódź, Poland, +48 42 645 54 44, [email protected]
Budapest, Hungary, +36 1 220 67 56, [email protected]
Zilina, Slovakia, +421 41 500 20 47, [email protected]
Ostrava, Czech Republic, +420 59 663 31 05, [email protected]
Timişoara, România, +40 35 646 74 01, [email protected]
Leipzig, Germany, +49 341 212 03 40, [email protected]
Coslada, Madrid, España, +34 91 123 47 71, [email protected]
www.axiomet.eu