Download FXSO User Manual
Transcript
3.12 Routing Table Routing Table is a rule to define the destination of the calls you make. You could define the rules by the number you dial or by the ports. The Routing Table button will show you the configuration table. (see figure 3.16) In fact, there are three directions of the incoming calls (from IP, FXS and FXO side). The explanation of the default routing is as below: The location with The location with the incoming calls the destination IP (Default) The explanation The destination will be the FXS port when the calls from the IP side without any define rules. Fxs The destination will be the IP side Fxs (Default) Fxo (Default) IP when the calls from the FXS port without any define rules. The destination will be the IP side when the calls from the FXO port without any define rules. IP 53