Download CombiNorm - Amalgamated Pumping Supplies
Transcript
3.2 Preservation 17 3.3 Environment 17 3.4 Mounting 18 3.4.1 Installation of the set 18 3.4.2 Assembly 18 3.4.3 Alignment of the coupling 18 3.4.4 Tolerances for aligning the coupling 19 3.5 Piping 19 3.6 Mounting accessories 20 3.7 Connection of the electric motor 21 3.8 Combustion engine 21 3.8.1 Safety 21 3.8.2 Sense of rotation 21 4 Commissioning 23 4.1 Control pump 23 4.2 Control motor 23 4.3 Preparation of lubrication 23 4.4 Preparing the unit for commissioning 23 4.5 Checking the sense of rotation 24 4.6 Starting the pump 24 4.7 Adjustment of shaft sealing 24 4.7.1 Stuffing-box packing 24 4.7.2 Mechanical seal 24 4.8 Control 25 4.9 Noise 25 5 Maintenance 27 5.1 Daily maintenance 27 5.2 Shaft sealing 27 5.2.1 Gland packing 27 5.2.2 Mechanical seal 27 5.3 Lubrication of the bearings 27 5.3.1 Grease-lubricated bearings (L1, L2) 27 5.3.2 Oil-bath lubricated bearings (L3, L4) 28 5.4 Environmental influences 28 5.5 Noise 28 5.6 Faults 28 6 Problem solving 29 (CN/EN #E) 4 Table of contents