Download User Manual - Webstaurant Store
Transcript
User Manual 1, 2 & 3 Bowl Juice Dispenser Gear Driven 30 Qt. Commercial Mixer Models: RBD-31 , RBD-32 , RBD-33 Shifting gears while this unit is Model: MX30 running will void warranty. 07/2014 Please read and keep these instructions. Indoor use only. www.AvantcoEquipment.com 1 WWW.AvantcoEquipment.com 1 Please read and keep these instructions. Indoor use only User Manual Index General .............................................. 3 Parts Overviewinformation .............................................................. 3 Standard Accessories .................................................... 4 .................................................. 4 Parts overview and technical data ....................... 4 Operation Instructions Figure 1: Gear Axle ........................................................ 5 Operating instructions ..................................... 5-6 Figure 2: Initiative Axle .................................................. 6 Cleaning maintenance .......................... 7-8 Figure 3: Fork and ................................................................. 7 Figure 4: Change Speed Axle ........................................ 8 Wiring diagram ................................................... 9 Figure 5: Turning Plate and Mixing Axle ....................... 9 Figure 6: Single Phase Motor..................................................10 Diagram ....................... 10 Trouble shooting Figure 7: Center Axle ................................................... 11 Warranty information ...........................................10 Maintenance and Protection ........................................ 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 2 User Manual Important Safeguards Index 1. When using electrical appliances, basic safety precautions should always be Partsfollowed Overview including .............................................................. 3 the following: Standard Accessories .................................................... 2. Read all instructions Operation .................................................. 3. CloseInstructions supervision is necessary when 4 any 4appliance is used by or near children. Figure 1: Gearsure Axle 4. Make the........................................................ appliance is OFF when not 5in use, before putting on or taking off parts, and before cleaning. Figure 2: Initiative Axle .................................................. 6 5. Do not operate any appliance with a damaged cord or plug or after the appliance ................................................................. 7 malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized facility for examination, repair or electrical or mechanical Figure 4: Change Speed Axle service ........................................ 8 adjustment. Figure 3: Fork Figure 5: Turning Plate and Mixing Axle 6. Do not use outdoors. Figure 6: Single Phase Motor Diagram Figure 7: Center Axle ....................... ....................... ................................................... 9 10 11 SAVE THESE INSTRUCTIONS Maintenance and Protection ........................................ 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Useful instruction for transport 1. In order to prevent the oil contained Warranty Information ................................................... in the13hermetic compressor from flowing into the cooling circuit, it is necessary to always carry, store and handle the machine in a vertical position, following the instructions found on the packaging. IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 2. If the machine was accidentally or purposely placed in a non-vertical position during transport, before operating the machine, it should be kept in a straight position for approximately 30 minutes, to allow the oil to flow back into the compressor. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. Unpacking: Remove cardboard and plastic covering. Make sure that the machine has not been damaged. Remove the plastic film from all the stainless steel panels. injury. 8. Do Important: not use outdoors The various packaging should be kept from Children since they are 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to potentially dangerous. Dispose the Packaging according to the regulations from the reduce the risk of injury to persons, and/or damage to the mixer. local authorities. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 3 User Manual Parts Index Overview and Technical data Parts Overview .............................................................. Standard Accessories .................................................... Operation Instructions Figure 1: Gear Axle ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle ....................... ....................... ................................................... Maintenance and Protection ........................................ Model Capacity Voltage (V) (Hz) Power (W) RBD-31 1 x 3 Gal 120/60 RBD-32 2 x 3 Gal 120/60 RBD-33 2 x 3 Gal 120/60 3 4 7x18x25 R134a 265 17x18x25 R134a 272 24x18x25 R134a 6 7 8 9 10 11 12 13 Troubleshooting ........................................................... 13 IMPORTANT SAFEGUARDS 260 5 ........................................................... ................................................... Gas 4 Cleaning Warranty Information Dimension (Inch) 13 1. Cover 2. Mixing Paddle 3. Tap lever 4. Tap gasket 5. Tank (paddle system) 6. Gasket 7. Mixing pod 8. Thermostat 9. Mixing motor 10.Condenser fan 11. Water tray 12. Foot 13. Power switch 14. Switch for mixing motor 15. compressor 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 4 User Manual Operating Instructions Index Positioning Parts Overview .............................................................. 1. Do not install the appliance in the area where 3 Standard Accessories a water jet could be.................................................... used. 4 Operation Instructions 4 2. Place machine on a horizontal and sturdy .................................................. surface. 3. Please install the........................................................ appliance in locations Figure 1: Gear Axle where it can be overseen by trained personnel. Figure 2: Initiative Axle .................................................. 4. For good ventilation, keep a distance of 7 inches, unit and walls or Figure 3: Fork between ................................................................. other objects. Increase the distance if the Figure 4: Change Speed Axle source. ........................................ obstacles are a heating When the dispenser is in place, adjust the legs in order Figure 5: Turning Plate(FIG.1) and Mixing Axle ....................... to keep it level. Figure 6: Single Phase Motor Diagram Assembling Figure 7: Center Axle ....................... ................................................... 1. Remove the cover from the tank. 2. Hang theand waste liquid container to hanging Maintenance Protection ........................................ holes on front panel. Cleaning 3. Insert the taps........................................................... (with gasket) to the tank and through the tap lever Troubleshooting ........................................................... Electrical connection Warranty Information ................................................... 5 6 7 8 9 10 Fig. 1 11 12 13 13 13 Before inserting the plug into the electrical socket, carefullySAFEGUARDS read the following precautions: IMPORTANT 1. When using electrical appliances, basic safety precautions should always be followed including the following: 1. Make sure that the machine is properly 2. Read all instructions. 3. Close supervision isto necessary when anygrounding appliance is used by or near children. connected an efficient system, in compliance with current safety standards. 5. Avoid contacting moving parts. 2. sure thewith voltage is in 6. DoMake not operate anythat appliance a damaged cordaccordance or plug or after the appliance malfunctions, or is dropped damaged in any manner. Return appliance to the nearest authorized service facility for with or what indicated on the “serial number“ examination, repair or electrical or mechanical adjustment. label applied on the chassis. 3.injury. The current available is sufficient for the 8. Do not use outdoors maximum required by the machine. 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to 4.reduce If necessary, only and/or approved the risk of injuryuse to persons, damagemultiple to the mixer. outlets, in compliance with current SAVE THESE INSTRUCTIONS safety standards. If in doubt, consult only specialized technicians. 2By law, the machine must always be grounded. WWW.AvantcoEquipment.com www.AvantcoEquipment.com 5 User Manual Operating Instructions Index How To Use: Parts Overview .............................................................. 3 Before using, the tanks and taps of the Standard Accessories .................................................... 4 Operation Instructions 4 appliance should be cleaned carefully .................................................. Filling Figure 1: Gear Axle usage ........................................................ To ensure correct of the machine ensure that the liquid level of the tank does not go Figure Initiative Axle use .................................................. below2:3-4 Qt (please the level lines on the tank for reference). Figure 3: Fork ................................................................. 1. Mix product in a separate container (FIG. 2). ........................................ 2. Make sure to unplug the appliance before filling up thePlate container. Figure 5: Turning and Mixing Axle ....................... 3. Do not fill the container with hot product. 4. Do6:not let liquid level exceed level Figure Single Phase Motor Diagram the “MAX” ....................... line (FIG. 3). Figure 4: Change Speed Axle Figure 7: Center Axle ................................................... Beverage Temperature Adjustment (FIG.5) Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 To adjust the temperature of liquid, lift up the Cleaning ........................................................... 13 plastic cover on left side of appliance then turn the temperature ........................................................... control knob to set the Troubleshooting 13 temperature. Lower down the temperature by turning the knob clockwise (lower figure), and Warranty Information ................................................... 13 increase temperature by turning it anticlockwise (higher figure). Note: The numbers beside the control knob do SAFEGUARDS not indicate the actual IMPORTANT 1. When using electrical appliances, temperature of the liquid.basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance by or near children. CAUTION: You are suggested not tois used reset the temperature 5. Avoid contactingcontroller moving parts. frequently. Fig. 5 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 6 User Manual Cleaning and Maintenance Index Observe the ambient temperature The suitable for an ambient temperature 3ranging between 16°C - 32°C. Partsappliance Overview is.............................................................. Standard Accessories .................................................... 4 Cleaning For health standard and good quality of beverages, clean tanks, lids and the mixing paddles / pumps Operation Instructions 4 as often as possible. .................................................. Figure 1: Gear ........................................................ Caution: DoAxle not clean the appliance by water jet. 5 Figure 2: Initiative Axle 6 .................................................. 1. Before carrying out cleaning and refilling, remove the power plug 2. Do 3:not use ................................................................. abrasive powders that might impair the7 tanks and lid’s polished glossy finish. Figure Fork 3. Use neutral soap and a little warm water to wash container, lid, mixing paddles/pump, refrigerator tank tap.Speed Rinse carefully with water in order to8remove any soap residue. Figure 4: and Change Axle ........................................ 4. To maintain a high standard of flavor, leave the dispenser turned on night and day in order to avoid Figure 5: Turning Plate and Mixing Axle ....................... 9 deposits forming. 5. Pour out the waste water in waste liquid reservoir and clean it as often as possible. Figure 6: Single Phase Motor Diagram Caution: Figure 7: Center Axle ....................... ................................................... 10 11 Do not use any organic solvents (petrol, alcohol, etc.) for cleaning the appliance. The case of the appliance may be damaged........................................ and explosive vapours12 may develop. Do not use any sharp edged Maintenance and Protection objects for cleaning. Cleaning ........................................................... 13 The appliance may be cleaned with a damp towel, but may never be immersed in water. ........................................................... 13 After cleaning the appliance make sure that it will be dried completely. Troubleshooting Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 7 User Manual Cleaning and Maintenance Index Disassembling and Assembling the tanks: Parts Overview .............................................................. 3 To disassemble and assemble the tanks or to Standard Accessories .................................................... change the rubber tank gaskets : 4 Operation Instructions 4 .................................................. 1. Disconnect the unit by removing the plug. Figure 1: Gear Axle ........................................................ 2. Remove the cover from the tank. 5 3. Remove the Axle mixing.................................................. paddle from its shaft. For Figure 2: Initiative 6 Figure 3: Fork on ................................................................. reported the diagram (Fig.6). 7 4. Lift4:container withAxle both hands by a light, Figure Change Speed ........................................ 8 Figure 5: the Turning Platecolumn and Mixing Axle wet cooling and gasket........................ 9 5. To6:remove tap, lift it from its setting. Figure Single Phase Motor Diagram ....................... 10 the pump disassembling follow the instructions swinging motion. If there is difficulty, please 6. Change the gaskets for tanks and taps only ................................................... with the genuine gaskets that are supplied by an authorised supplier. ........................................ Maintenance and Protection 12 To reassemble the unit, repeat the above Cleaning ........................................................... 13 Troubleshooting 13 Figure 7: Center Axle operations in reverse. ........................................................... Warranty Information ................................................... Fig. 6 11 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 8 User Manual Wiring diagram Index 120V60Hz 3 .............................................................. Description Parts Item Overview S1 Main Switch S2 Switch S3 (see note 2) Switch S4 (see note 2) Switch Standard AccessoriesMixer.................................................... M1 / Pump motor Operation Instructions M2 (see note 1, 2) Mixer / .................................................. Pump motor Figure 1: Gear ........................................................ M3 (see note Axle 2) Mixer / Pump motor Figure 2: Initiative Axle F1 Fan T1 Figure 3: Fork K1 .................................................. Thermostat ................................................................. Compressor Kr Relay Kt Thermal Protector Figure AxleMotor ........................................ Km 4: Change Speed Electric Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle Item ....................... ................................................... Maintenance and Protection Cleaning ....................... ........................................ ........................................................... 4 4 5 6 7 8 9 10 Note 1 = Only for model RBD-32 Note 2 = Only for model RBD-33 11 12 13 Description Troubleshooting ........................................................... 13 cCompressor CCondenser Warranty Information ................................................... 13 FFilter BcBoiler E1Evaporator IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the E2Evaporator following: E3Evaporator 2. Read all instructions. DDistributor 3. Close supervision is necessary when any appliance is used by or near children. Ca Capillary coils 5. Avoid contacting moving parts. High Pressure 6. Do1 not operate any appliance with Side a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for 2 Liquid Line examination, repair or electrical or mechanical adjustment. 3 Low Pressure Side TThermostat injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 9 User Manual Royal-Kincool Refrigeration Equipment Co., Ltd Juice dispenser model: Corolla series, English manual Troubleshooting Index Cleaning Trouble shooting: Cleaning ! WARNING: Connecting to a fresh life User Manual User Manual Version: 1.0 Released date: 2005.10.27 before changing speed in order to avoid damage to the gear bo Trouble Symptom Possible causes Solution Possible reasons Solution Remark DISCONNECT Plug is not in. THE Insert plug into mains socket THE MACHINE FROM POWER SOURCE BEFORE CLEANING. before speed in order to“I” avoiddamage the gear boto “I” position. Parts Overview .............................................................. 3 tomain changing Main switch is not on the Switch switch No power to position.including, whips, beaters and dough hooks should be properly washed before use. All new WARNING: mixermachine bowls and accessories MACHINE FROM THE POWER SOURCE DISCONNECT Power cordTHE is broken. power cord BEFORE CLEANING. Standard Accessories .................................................... 4 either Wash with hot water and a mild soap solution and then rinse offReplace with a mild vinegar or soda. solution and then rinse again with Main switch is cleaning broken. procedure isReplace main Ask clean is highly this followed for switch bowls andbe accessories prior tofor whipping All newwater. mixerItbowls andrecommended accessories including, whips, beaters and dough hooks should properly washed before use.egg whites or Compressor does not start See “compressor does not start” authorized Operation Instructions .................................................. 4 whole eggs. The mixer should be cleaned daily with a clean damp cloth. Wash with hot water and a mild soap solution and then rinse off section. with either a mild vinegar or soda. solution and then rinse again with service Ifclean the unit hasItnot been recommended used it isthe recommended the procedure above is followed before use. egg whites or water. is highly this cleaning procedure isFind followed for bowls andre-charge accessories prior tomixer whipping department for Gassome leaktime into cooling that leak, filter it out and circuit. the cooling circuit Figure 1:eggs. GearThe Axle 5cloth. It is important that the ........................................................ rear bowl lift guidesdaily are greased every three months to prevent corrosion. to check and whole mixer should be cleaned with a clean damp Machine is Condenser is clogged. repair it. Clean the condenser If the unit hasnot not been used for some time it is recommended that the procedure above is followed before mixer use. cooling Fan motor is burnt. Replace fan motor Figure 2: Initiative 6 months to prevent corrosion. It is important thatAxle the rear .................................................. bowl lift guides are greased every three Lack of air flow Increase distance between the machine and other obstacles / Figure 3: Fork ................................................................. 7 heating sources Trouble Possible Causes Solution Main switch is broken Replace main switch Figure 4: Change Speed Axle ........................................ 8 Compressor protector is Replace compressor protector The axles can’t work when broken. Poor contact of the electrical Check the Plug Trouble Possible Causes Solution Compressor operating thedoes machine equipment not and Mixing Compressor broken Replace compressor relay Figure 5: Turning Plate Axle relay is....................... 9 start when The axles can’t work Poor contact of the electrical Check the Plug Compressor motor is broken Replace motor The mixing bowl is out of position Moving direction is not correct Change ! Troubleshooting Troubleshooting operating the machine Figure 6: Single Phase Motor Diagram equipment ....................... 10 Gas leak into the cooling Find leak, filter it out and re-charge The mixing bowl is out of position Moving direction is not correct Change circuit the circuit Ask for Leaks7: oilCenter Axle Sealing washer damaged Change Figure ................................................... 11 iscooling authorized Condenser is clogged Clean the condenser service of air flow is rusted Increase distance between Difficult the bowl and........................................ down Slidewaywasher Cleanthe the department slideway and lubricate One is upLack Maintenance andtank Protection 12 is damaged Leaks oilto move Sealing Change machine and other obstacles / not cooling to check and heating sources repair it. The motor overheated The voltage is13not enough, or Checkthe theslideway voltage or uselubricate Cleaning ........................................................... Difficult to is move the bowl upTube and down Slideway is rusted Clean and of the cooling circuit is Cut the tube, eliminate clog, and speed is down incorrect speed lower speed clogged. re-charge the cooling circuit Troubleshooting ........................................................... 13not enough, Filter is clogged is Replace the filter The motor is overheated The voltage or Check the voltage or use Noise and is overheating Poor lubrication Add orspeed change lubrication and speed down incorrect The mixing The mixing motor is broken speed Replace the mixing motor lower paddles are ................................................... Warranty Information 13 Mixer touches The mixing device or bowl de Repair change the bowl notbowl working Noise and overheating Poor lubrication Add or or change lubrication formed Replace the pump motor or mixing device The pump The pump motor is broken notbowl working The pump switch is broken. device Replace pump Mixer touches The mixing or the bowl de switch Repair or change the bowl Limited Warranty Limited Warranty IMPORTANT SAFEGUARDS formed or mixing device 1. When using electrical appliances, basic safety precautions should always be followed including the following: Warning: If the appliance has any problem or has been damaged, do not try to repair or replace it by yourself. Please ask for the authorized service department for help. 2. Read all instructions. AllClose equipment, which is soldwhen under for commercial purpose is warranted against defects 3. supervision is necessary anyAvantco appliancetrademark is used by orand nearused children. in materials and workmanship. The warranty runs for one year from the date of original installation and is for the benefit Manufacturer: Royal-Kincool Refrigeration Equipment Co., Ltd 5. contacting moving parts. ofAvoid the original purchaser only.under All other Warranties, Expressed or for Implied, Statutory or Otherwise, including Without All equipment, which isThe sold Avantco trademark and used commercial purpose is warranted against defects Address: 2nda damaged Industrial Xiaolan Town, Guangdong, 6. Do not operate any appliance with cordZone, or plugXinglong or after the Village, appliance malfunctions, or is Zhongshan, Limitation any implied Warranty of Merchantability or Fitness for Purposes are excluded. The Seller shall in no event be indropped materials and workmanship. The warranty runs for one year from the date of original installation and is for the benefit or damaged in anyor manner. Return appliance to the nearest authorized service facility for China liable for direct, indirect consequential damages in connection with Avantco commercial products. ofexamination, the originalrepair purchaser only. other Warranties, or electrical or All mechanical adjustment. Expressed or Implied, Statutory or Otherwise, including Without Limitation anyisimplied Warranty of Merchantability or Fitness for Purposes are excluded. The Seller shalllack in no be This warranty not effective if damage occurs because of accident, carelessness, improper installation, ofevent proper injury. liable forsupervision direct, indirect or consequential damages in connection Avantco commercial products. set – up, when required or if the equipment is installedwith or operated in any manner contrary to the installa 8. Do not use outdoors tion and operating instructions. In theseoccurs cases, because repairs will be made at a reasonable cost. Work performed byof unauthor This warranty is not effective of accident, carelessness, improper installation, lack proper 9. Keep hands, hair, clothing, as wellifasdamage spatulas and other utensils away from beaters during operation to ized personnel or unauthorized service agencies voids this Warranty. set – up,the supervision required if the equipment reduce risk of injurywhen to persons, and/orordamage to the mixer. is installed or operated in any manner contrary to the installa tion instructions. In these cases, repairs will be made at a reasonable cost. Work performed by unauthor Itemsand notoperating covered under warranty: SAVE THESE INSTRUCTIONS ized personnel or unauthorized service agencies this Warranty. Changing Gears on the Mixers while Unit is Runningvoids and Overloading as Determined by an Approved Certified Technician. 8 Items not covered warranty: This warranty does under not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used Changing on the Mixers while Unit is Running and Overloading as Determined by an Approved Certified Technician. outside of Gears the United States. 2 - www.AvantcoEquipment.com This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used outside of the United States. www.AvantcoEquipment.com 13 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 10 13 -