1
Download User Manual - Webstaurant Store
Transcript
User Manual Chocofairy OPERATING INSTRUCTIONS Read these operating instructions carefully before using the machine ISTRUZIONI 1,3 & 2,6 GallonMANUALE Beverage Dispenser MANUAL DE EMPLEO Gear Driven 30 Qt.BETRIEBSANLEITUNG Commercial Mixer Leggere attentamente queste istruzioni d’uso prima di utilizzare la macchina Leer atentamente estas instrucciones de uso antes de utilizar la máquina Diese Bedienungsanleitung ist vor dem ersten Gebrauch der Maschine aufmerksam zu lesen Models: DHC-13 , MODE DHC-26 Shifting gears while this unit is D’EMPLOI Model: MX30 running will void warranty. Lire attentivement ce mode d’emploi avant d’utiliser la machine 07/2014 Please read and keep these instructions. Indoor use only. www.AvantcoEquipment.com 1 Please read and keep these instructions. Indoor use only WWW.AvantcoEquipment.com 1 SL 04/2010 User Manual Index General ..............................................3 Parts Overviewinformation .............................................................. 3 Standard Accessories .................................................... 4 .................................................. 4 Parts overview and technical data .......................4 Operation Instructions Figure 1: Gear Axle ........................................................ 5 Operating instructions .....................................5 -6 Figure 2: Initiative Axle .................................................. 6 Cleaning maintenance ..........................7 - 16 Figure 3: Fork and ................................................................. 7 Figure 4: Change Speed Axle ........................................ 8 Wiring diagram ...................................................17 Figure 5: Turning Plate and Mixing Axle ....................... 9 Figure 6: Single Phase Motor Diagram ....................... 10 Parts overview .....................................................18 Figure 7: Center Axle ................................................... 11 Trouble Maintenance shooting and Protection..................................................19 ........................................ 12 Cleaning ........................................................... 13 Warranty ...........................................19 Troubleshootinginformation ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 2 User Manual Important Safeguards Index 1. When using electrical appliances, basic safety precautions should always be Parts Overview including .............................................................. 3 followed the following: Standard Accessories .................................................... 2. Read all instructions Operation .................................................. 3. CloseInstructions supervision is necessary when 4 any 4appliance is used by or near children. Figure 1: Gearsure Axle 4. Make the........................................................ appliance is OFF when not 5in use, before putting on or taking off parts, and before cleaning. Figure 2: Initiative Axle .................................................. 6 5. Do not operate any appliance with a damaged cord or plug or after the appliance ................................................................. 7 malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized facility for examination, repair or electrical or mechanical Figure 4: Change Speed Axle service ........................................ 8 adjustment. Figure 3: Fork Figure 5: Turning Plate and Mixing Axle 6. Do not use outdoors. Figure 6: Single Phase Motor Diagram Figure 7: Center Axle ....................... ....................... ................................................... 9 10 11 SAVE THESE INSTRUCTIONS Maintenance and Protection ........................................ 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 3 User Manual Parts Index Overview and Technical data Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle Figure 6: Single Phase Motor Diagram ....................... ....................... Boiler tank drainage cap Figure 7: Center Axle ................................................... Maintenance and Protection Cleaning Troubleshooting ........................................ ........................................................... Mod. 10 Liters ........................................................... Warranty Information 6,8 Kg (14.96 Ib) L=28 cm (11.02 inch) P=41 cm (16.14 inch) A=58 cm (22.83 inch) 7,5 Kg (16.5 Ib) 5 6 7 ........................................ Figure 5: Turning Plate and Mixing Axle 17 3 L=28 cm (11.02 inch) P=41 cm (16.14 inch) A=46,50 cm (18.31 inch) ................................................... 8 9 10 11 12 13 13 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 17 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 04/2010 4 User Manual Operating Instructions Index remove the lid and pour the beverage prepared accor dlng to the manufacturer’s lnstructlons lnto t he bowl; Parts Overview .............................................................. Standard Accessories .................................................... 4 .................................................. 4 Starting Up Operation Instructions Figure 1: Gear Axle ........................................................ Fig.6 Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle Fig.7 Troubleshooting ....................... ....................... ................................................... Maintenance and Protection Cleaning 3 ........................................ 5 6 7 8 9 10 11 12 ........................................................... 13 ........................................................... 13 Warranty Information ................................................... Fig.9 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. Fig.9 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 5 User Manual Operating Instructions Index the machlnes wlth LCD offer the opportunlty to make a visual check to see when the product has reached the required temperature inside the bowl. Parts Overview .............................................................. 3 Dispensing the productthe Product Dispensing Warnlng: during bowl and/or boller switch off the machine us- the main swltch (LED off). Standarding Accessories .................................................... Operation Instructions Warning: check to make.................................................. sure that the water level never falla below the minimum level, whlch is marked -MIN-; this will prevent machine operations from being shut down. Figure 1: Gear Axle ........................................................ - 115 V madel: A level sensor down machine operation as soon Figure 2: Initiative Axlewlll shut .................................................. as the water level falls below the minimum; to restore operation, the boiler tank must be topped up. lf the machine Figure 3: Fork ................................................................. does not restart after the tank has been topped up, contact a specialized technician. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram ....................... 4 To dispense hot chocolate proceed as follows; 4 5 6 place a cup beneath the tap; use 7 the lever on the tap (the product is dispensed when the lever is pressed or pulled) until the required amount of product has been poured inside the cup; Fig.11 8 gradually release the tap lever so that it returns to the standby position (tap off). 9 ....................... 10 Figure 7: Warning: Center never Axleoperate ................................................... the machine without water in the boiler 11 as this would damage the heating element. a temperature sensor willand in anyProtection case cut out power to the heating element if there Maintenance ........................................ is no water in the boiler. To restore the machine to normal operation press the pushbutton underneath the base. 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... It is advisable to keep the rod in the maximum dispensing position to help the product to flow at the required rate. 13 Warning: for correct machine operation, only use demineralized water in the boiler tank. lf the product is especially thick, it is advisable to keep the rod pulled out at the maximum position; any clogging in the dis1. When using electrical appliances, basic safety precautions should always be followed including the be removed by sliding the rod back and forth pensino line may following: while keeping the machine, as shown in the Fig. 12. 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. IMPORTANT SAFEGUARDS 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com Warning: never touch thewww.AvantcoEquipment.com bowl or lid while the machine is operating, since they are very hot, Always use the knob when moving the bowl lid. 6 User Manual Cleaning and Maintenance Index Cleaning and Sanitation Procedures Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 7 User Manual Cleaning and Maintenance Index 7.2 Emptying the bowl Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 7.3 Removing the bowl 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 8 User Manual Cleaning and Maintenance Index unhook the bowl hook-on handles, as illustrated in the figure, to free the bowl from the machine body; Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork 3 .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle slide the mixing auger upwards with one hand, taking care to grip it by the rotation pin; .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ 5 6 7 8 release the bowl from the machine body, using two fingers to prise it away from the fixed steel part of the mixer auger (A) and the others to grip the edge of thePlate bowl (B): Gradually pull theAxle bowl harder until it comes away Figure outer 5: Turning and Mixing ....................... from its seating; place the bowl on a flat surface and using both hands, romove the gasket by sliding it upwards in the direstion shown by the arrow. Figure 6: Single Phase Motor Diagram 10 Figure 7: Center Axle ....................... ................................................... Maintenance and Protection ........................................ 9 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS slide the bowl upwards using both hands; 1. When using electrical appliances, basic safety precautions should always be followed including 7.4.Removing Rem ovingthe the 7.4 thetap tap following: 2. Read all instructions. Removing the tap is prohibited if the bowl contains the product 3. Close supervision is necessary when any appliance is used by or near children. or any other liquid. 5. Avoid contacting moving parts. To remove the tap, proceed as follows: 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is move the rod to the maximum dispensing position; dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 9 User Manual Cleaning and Maintenance Index press the button (A) securing the tap to the machine and then remove the Parts Overview .............................................................. tap (B) with both hands, as illustrated in the figure; 3 Standard Accessories .................................................... 4 .................................................. 4 Operation Instructions Figure 1: Gear Axle ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram ....................... ....................... ................................................... lt is necessary to remove all parts fitted to the pan. Maintenance and Protection ........................................ Remove any product left in the bowl, see paragraph 7.2; Cleaning 5 6 7 8 9 10 refit the tap; pour a little water inside the pan; 7.5 pan 7.5.Cleaning Cleaning the the pan Figure 7: Center Axle clean the channel connecting the bowl and the tap, using a cleaning brush, as illustrated in the figure; 11 12 ........................................................... 13 Troubleshooting ........................................................... remove the tap from the machine, see paragraph 7.4; 13 remove the bowl from the machine, see paragreph 7.3; clean Information the entire surface of the pan using a damp cloth and/or a non-abrasive 13 Warranty ................................................... sponge; IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. use the tap to drain out all of the water from the pan so as to eliminate any small product residues inside the dispensing channel. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 10 User Manual Cleaning and Maintenance Index 7.6 Disassembling the tap Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 11 User Manual Cleaning and Maintenance Index 7.7 Assembling the bowl Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 04/2010 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 12 User Manual Cleaning and Maintenance Index insert the mixer into its seating following the steps descrlbed in paragraph Fig. 37 shows a bpwl which is not correctly assembled;here the bowl does NOT perfectly adhere to the.............................................................. machine edge. Parts Overview 3 7.3 in reverse order. Standard Accessories .................................................... 4 .................................................. 4 Operation Instructions Figure 1: Gear Axle ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle ....................... 5 6 7 8 9 Fix the bowl to the machine body using the relevant hook-on handles, as illustrated in thePhase figure; Motor Diagram Figure 6: Single ....................... 10 Figure 7: Center Axle 11 ................................................... Maintenance and Protection ........................................ To reassemble the tap, carry out in reverse all of the disassembly steps illustrated previously (Fig. 32 to Fig. 27). 12 To fi t the lever (F) push the rod (D) from the inside until the guides protrude; Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 7.8 7.8.2.Assembling Assemblingthe thetap tap 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: insert the mixer auger into its seating; 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 13 User Manual Cleaning and Maintenance Index 7.8.3Fitting Fittingthe thetap tap 7.8.1 7.10.Cleanining Cleaning thethe dripdrip tray tray 7.10 Parts To flOverview t the tap correctly b.............................................................. ack in place proceed as follows; 3 Standard Accessories .................................................... 4 .................................................. 4 T he drip tray shou ld be empt i ed and cleaned dally. hold down the button , making sure that the rod is completely extract ed; introduce the tap into the seat provided and push until the pushbutton returns to its initial position. Operation Instructions Figure 1: Gear Axle ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle ....................... ....................... ................................................... 7.9 7.9.Internal Internalsanitization sanitization Maintenance and Protection ........................................ Note: t h e tray nee ds t o b e e mpti e d out a nd cleaned every t ime that the red f lo at fitted t o t he grid rises; thi s is t o st op llquid fr om leaki n g out. 5lift the tray with grid and pull it outwards to remove it from lts seating; 6 7 8 9 10 11 12 wash the tray and grid separately with lukewarm water.; Cleaning Warnin g! t he........................................................... t her m ostat m u st be s et to - OFF-. 13dry all of the compon ents; Troubleshooting 13 ........................................................... Carry out the following steps: Warranty Information ................................................... prepare the sanitising solution (see paragraph 7.7); fill the bowl with the sanitising solution; IMPORTANT SAFEGUARDS reposition the grid on top of the tray; fit the tray back in place and press down to secure i t to the mach ine. 13 7.11.Cleaning Cleaning the 7.11 thebowl bowllidlid Rem ove the b owl lid from the mac hine; 1. When using electrical appliances, basic safety precautions should always be followed including the leave the solution to act for about 30 minutes; clean the surface using a damp cloth and/or a non-abrasive spong e soaked following: in sanitising product. 2. Read all instructions. empty out the sanitising solution fromany the appliance bowl; 3. Close supervision is necessary when is used by or near children. rinse thoroughly using clean water. then rinse out the bowl and inside surfaces thoroughly to eliminate all resi5. Avoid contacting moving parts. dues of sanitizing solution. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 14 User Manual Cleaning and Maintenance Index 7.12 Emptying the boiler Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 7.13 Cleaning and de-scaling the boiler tank 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 15 to ensure that all the components installed and the machine itself are maintained at a high level of safety. User Manual Any worn components must be replaced by an original spare part. It is forbidden to use the machine when even only one of its components is faulty or worn. Users are forbidden to perform periodic maintenance. Cleaning and Maintenance Index 8. SCRAPPING Resetting the temperature sensor Parts7.14 Overview .............................................................. 3 Standard Accessories .................................................... 4 .................................................. 4 Operation Instructions Figure 1: Gear Axle ........................................................ Figure 2: Initiative Axle Figure 3: Fork .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle ....................... Fig. 48 ....................... ................................................... Maintenance and Protection ........................................ 5 6 All products are marked with the crossed out wheeled bin 7reminder of separate collection obligations. 8 9 10 11 12 ........................................................... 13 Troubleshooting ........................................................... 13 ................................................... symbol as a Correct observance of all of the provisions for the disposal of end-of-life pr ducts will contribute to safeguarding the environment. Cleaning Warranty Information Electrical and electronic equipment needs to be disposed of according to the European Directive 2002/96/CE and in com. pllance with the standards and regulations in force tor the country in which the machine is used. Such equipm ent may not be disposed of as normal municipal solid waste but must rather be separately collected to optimise recovery and recycling of the materials used to manufacture them. 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: Fig. 49 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. 04/2010 SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com - 19_EN - www.AvantcoEquipment.com 16 User Manual Wiring Index diagram 115 Volts Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 17 User Manual Parts Index Overview Parts Overview .............................................................. Standard Accessories Operation Instructions Figure 1: Gear Axle Figure 3: Fork .................................................... 4 .................................................. 4 ........................................................ Figure 2: Initiative Axle .................................................. ................................................................. Figure 4: Change Speed Axle ........................................ Figure 5: Turning Plate and Mixing Axle Figure 6: Single Phase Motor Diagram Figure 7: Center Axle 3 ....................... ....................... ................................................... Maintenance and Protection ........................................ 5 6 7 8 9 10 11 12 Cleaning ........................................................... 13 Troubleshooting ........................................................... 13 Warranty Information ................................................... 13 IMPORTANT SAFEGUARDS 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. 3. Close supervision is necessary when any appliance is used by or near children. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. injury. 8. Do not use outdoors 9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer. SAVE THESE INSTRUCTIONS 2 WWW.AvantcoEquipment.com www.AvantcoEquipment.com 18 User Manual User Manual Troubleshooting Index Cleaning before changing speed in order to avoid damage to the gear bo ! WARNING: 7.Trouble Parts Overview DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING. Possible Causes Solution .............................................................. 3 All new mixer bowls and accessories including, whips, beaters and dough hooks should be properly washed before use. Standard Accessories 4 either a mild vinegar or soda. solution and then rinse again with Wash with hot water and a.................................................... mild soap solution and then rinse off with clean water. It is highly recommended this cleaning procedure is followed for bowls and accessories prior to whipping egg whites or Operation Instructions .................................................. whole eggs. The mixer should be cleaned daily with a clean damp4cloth. If the unit has not been used for some time it is recommended that the procedure above is followed before mixer use. Figure 1: Gear Axle 5 months to prevent corrosion. It is important that the ........................................................ rear bowl lift guides are greased every three Troubleshooting Figure 2: Initiative Axle .................................................. 6 Figure 3: Fork ................................................................. 7 Trouble Possible Causes Figure 4: Change Speed Axle ........................................ 8 The axles can’t work when operating the machine Figure 5: Turning Plate and Mixing Axle The mixing bowl is out of position Figure 6: Single Phase Motor Diagram Figure Leaks7: oilCenter Axle Poor contact of the electrical equipment 9 ....................... Moving direction is not correct ....................... 10 ................................................... 11 is damaged Sealing washer Solution Check the Plug Change Change Maintenance and the Protection 12 Difficult to move bowl up and........................................ down Slideway is rusted Clean the slideway and lubricate Cleaning ...........................................................The voltage is13not enough, or The motor is overheated incorrect speed Check the voltage or use lower speed Poor lubrication Add or change lubrication and speed is down Troubleshooting ........................................................... Noise and overheating Warranty Information Mixer touches bowl ................................................... 13 13 The mixing device or bowl de formed Repair or change the bowl or mixing device IMPORTANT SAFEGUARDS Limited Warranty 1. When using electrical appliances, basic safety precautions should always be followed including the following: 2. Read all instructions. AllClose equipment, which is soldwhen under for commercial purpose is warranted against defects in 3. supervision is necessary anyAvantco appliancetrademark is used by orand nearused children. materials and workmanship. The warranty runs for six months from the date of original installation and is for the benefit 5. contacting moving parts. ofAvoid the original purchaser only. All other Warranties, Expressed or Implied, Statutory or Otherwise, including Without 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is Limitation any implied Warranty of Merchantability or Fitness for Purposes are excluded. The Seller shall in no event be dropped or damaged in any manner. Return appliance to the nearest authorized service facility for liable for direct, indirect or consequential damages in connection with Avantco commercial products. examination, repair or electrical or mechanical adjustment. This warranty is not effective if damage occurs because of accident, carelessness, improper installation, lack of proper set injury. – up, supervision when required or if the equipment is installed or operated in any manner contrary to the installation 8. Do not use outdoors and operating instructions. In these cases, repairs will beaway made at beaters a reasonable cost. Work 9. Keep hands, hair, clothing, as well as spatulas and other utensils from during operation to performed by unauthorized personnel service agencies Warranty. reduce theor riskunauthorized of injury to persons, and/or damagevoids to thethis mixer. - SAVE INSTRUCTIONS Items notTHESE covered under warranty: Changing Gears on the Mixers while Unit is Running and Overloading as Determined by an Approved Certified Technician. This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used 2outside of the United States. www.AvantcoEquipment.com www.AvantcoEquipment.com 13 WWW.AvantcoEquipment.com 19 -
