1
Download User Manual - Single Point Controller, Oxygen, O
Transcript
User Manual - Single Point Controller, Oxygen, O2 Mar. 13 3.6.10 MP Signal Assigned to Analog Output The measuring point signal can be assigned to the analog output. At this the signal defined in the control mode (current or average value) is transmitted. Analog output see also: 3.7.7 Symbol Description MP 01 Measuring Point 0 A Default Status 0 Function Selection MP No. 0 = MP Signal not assigned to analog output 1 = MP Signal assigned to analog output 1 21 Automatikprodukter
