1
Download User`s Manual
Transcript
3. Hardware Setup Installation condition To use the MPC-WA1RA at an ambient temperature within the range of acceptable installation environment conditions, allow a clearance of at least 10 mm above the chassis and a clearance of at least 50 mm beside and below. Install the chassis only horizontally (at a vertical or horizontal slant angle within 5 degrees). It cannot be installed vertically. Side 160 180 10 270 620 50 (537) [mm] 620 Top 50 396 50 [mm] Figure 3.20. Clearances around the chassis 28 MPC-WA1RA
