Download TopSURV Reference Manual

Horizontal Alignment
• Code – the point code. Can be entered manually or selected from
the drop-down list. The code of an existing point cannot be
edited. The Attributes List
icon opens the Code-Attributes
screen to set the values for the attributes available for the selected
code.
• The
icon next to the Attributes List
following list:
icon displays the
– String: toggles the String field. Also, the
sign appears.
– Layer: opens the Select Layer screen to select the layer in
which to locate the point (see “On the Select Layer” on
page 6-10).
– Note: opens the Note screen. For details, see “The Topo
Menu” on page 9-3.
• North, East – the local coordinates of the point.
• Start Sta/Start Chn – the starting station number with distance to
the station, or the starting chain distance, depending on a
selection made in the Display screen (for details see “Display” on
page 2-8).
The Help Icon in the upper-left corner of the screen displays a pop-up
menu containing two items:
• Edit Points – opens the Points screen to edit points (see “Edit XSection Template” on page 7-27).
• Help – accesses the Help files.
The Horizontal tab displays a list of horizontal alignment elements,
the horizontal alignment plot, and the ending station (or chainage) of
each element. The selected horizontal alignment element is
highlighted in the plot displayed to the right of the screen (Figure 7-6
on page 7-8)
P/N 7010-0492
7-7