Download MiniCom 3

Meter Types
2.7
17
DYNAMIC Encoder
Register for cold water meters "Encoder" MBus and MiniBus.
Text on DYNAMIC Encoder MBus cable (grey)
M-Bus: no polarity
Protocol: EN 1434 / IEC 870
Attention - DYNAMIC Encoder MBus
Be careful what type of Encoder you use.
The DYNAMIC Encoder MBus will not communicate when connected to
MiniBus (inductive interface).
Text on DYNAMIC Encoder MiniBus cable (black)
Do not connect to an M-Bus !
red: Signal <+>
black: Ground
Protocol: EN 1434, IEC 870
Attention - DYNAMIC Encoder MBus
Be careful what type of Encoder you use.
The DYNAMIC Encoder MiniBus cannot be connected to MBus terminals.
Such a connection would destroy the register.
Features
Protocol : MBus (DYNAMIC Encoder MBus), MiniBus (DYNAMIC Encoder MiniBus)
Supported baudrates: 300
Supported addressing: primary, secondary (only for "Start Readout")
Supported communication interfaces: MBus terminals (DYNAMIC Encoder MBus), inductive interface
(can be connected through inductive head to MBus terminals)
Number of counters in meter readout: 2
List of supported commands
· Start Readout
© 2006 Sensus Metering System