1
Download Quick Glance
Transcript
4.0 Setting Up Quick Glance This section will explain how to configure the Quick Glance software for the first time. The first time you run Quick Glance it will require that you select a language, enter a password, and configure your video hardware. To begin using the software, you will also need to adjust the hardware and calibrate. 4.1 Language Selection The first time you run Quick Glance it will bring up the Select Language window. On later sessions of Quick Glance this window will not appear. Select the appropriate language from the drop-down box and click on OK. 4.2 Password Next, you will be asked for a password which is supplied to you by us. On later sessions of Quick Glance this window will not appear. The password is printed on the back of the camera housing. If you have any problems with your password, you can send an email request to [email protected]. Include your serial number, and software version when requesting a password. Quick Glance User‟s Manual Software Version 6.3 4.0 Setting Up Quick Glance Page 6 ©2011 EyeTech Digital Systems, Inc.
