1
Download T940/T964 User Manual - Astronics Test Systems
Transcript
Model T940 User Manual Publication No. 980938 Rev. K • tat964_setPhaseResumeTrigger • tat964_setJumpTrigger • tat964_setHaltTrigger • tat964_setExecuteStartTrigger • tat964_setExecuteStopTrigger Input Mode This pull-down control programs the trigger input mode. The selections for this pull-down control are: Table 5-31: Trigger Input Mode Settings Setting Description Normal Do not modify input signal before testing. Inverted Invert input signal before testing. The relevant VXIplug&play API functions are: • tat964_setHandshakePauseTrigger • tat964_setHandshakeResumeTrigger • tat964_setPhaseResumeTrigger • tat964_setJumpTrigger • tat964_setHaltTrigger • tat964_setExecuteStartTrigger • tat964_setExecuteStopTrigger Edge Test Clear This pull-down control programs the trigger event clear. The event clear allows the user to program when the rising/falling edge flip-flops are cleared during operation for the following triggers: • • • Pause 1-2 Halt Jump 1-4 The selections for this pull-down control are: Table 5-32 Trigger Event Clear Settings Setting Description Start Clear flip-flops at start of burst Step Clear flip-flops at start of every sequence step Event True Soft Front Panel Operation 5-34 Clear flip-flops when trigger event tests true Astronics Test Systems
