Download quickPX User Manual

quickPX
User Manual
2.4 Connecting the Camera to a Power
Supply
Some of the quickPX-systems
have an integrated power
supply cable as well as a slot to
supply the camera with electricity. This slot is located at the
end of a cable reaching out of
the space on the right of the
foto plate. Connect this slot with
the cable atached to the camera.
If performed properly the grey locking lever
snaps automatically to the right. Now flap the
small golden security lever to the right (see
pictures below). This lever prevents an unintentional unlocking of the locking lever.
2.5 Connecting the Camera to an USBport
Open the covering with the following or similar
labelling „A/V Out USB HDMI“ at the left side
of the camera. Now plug the black USB cable
you can find in the camera’s packaging into the
slot marked red on the picture below and into a
vacant USB-port of your computer.
If you wish to remove the camera again, first
turn the golden security lever upward. Now hold
the camera tightly with one hand while pulling
the grey locking lever upward. The camera disconnects from the adapter.
4