1
Download Catalogue - Preferred Language
Transcript
Fluke ScopeMeter Test Tools ® Handheld oscilloscopes for industrial, instrumentation and electronic applications TM ScopeMeter test tools are the rugged, safe choice for a wide variety of field service installation and maintenance applications. These handheld battery-powered oscilloscopes are easy to use, with a built-in multimeter, paperless recording and analysis capabilities. They are rugged and IP 51 dustand drip-proof rated to IEC529 standards to withstand harsh environments. The new 190 Series II, with two and four isolated input channels and 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth, are ideal for industrial electronics, automation, process control, and industrial machinery applications measuring three-phase power electronic circuits, or three-axis control systems comparing and contrasting multiple signals simultaneously. These tools are safety rated at CAT III 1000 V/CAT IV 600 V with longer battery life and up-to-date USB interface technology. The 120 series with 20 MHz or 40 MHz bandwidth, dual DMMs and paperless recording is the optimal choice for electrical and electro-mechanical applications, safety rated to IEC EN61010-1 CAT III 600 V. For Industrial network applications, the Fluke 125 adds industrial network physical layer analogue measurement algorithms to validate the network bus health. Selection guide 120 Series 190 Series II 123 124 125 190-062 190-102 190-202 190-104 190-204 190-502 20 MHz • — — — — — — — — 40 MHz — • • — — — — — — 60 MHz — — — • — — — — — 100 MHz — — — — • — • — — 200 MHz — — — — — • — • — 500 MHz — — — — — — — — • — Bandwidth Input channels 2Ch + 2 DMM • • • — — — — — 2Ch + DMM — — — • • • — — • 4Ch — — — — — — • • — Isolated inputs — — — • • • • • • Triggering Connect-and-View • • • • • • • • • Advanced triggering — — — • • • • • • Cursors — • • • • • • • • TrendPlot • • • • • • • • • ScopeRecord — — — • • • • • • 100 screen replay — — — • • • • • • Industrial BusHealth — — • — — — — — — Harmonics — — • — — — — — — FFT — — — • • • • • • Power measurements — — • • • • • • • Waveform mathematics — — • • • • • • • CAT II 1000 V — — — • • • • • • CAT III 600 V • • • • • • • • • CAT III 1000 V — — — • • • • • • CAT IV 600 V — — — • • • • • • Advanced measurement function EN61010-1 safety Interface • • • — — — — — — USB PC interface Opt Opt Opt • • • • • • USB memory port — — — • • • • • • — Optical RS-232 Power Ni-MH • • • — — — — — Li-Ion — — — • • • • • • Battery (hours) 7 7 7 4 (opt 8) 4 (opt 8) 4 (opt 8) 7 7 7 General specifications Size (HxWxD) Weight 232 mm x 115 mm x 50 mm (9.2 in x 4.5 in x 2 in) 270 mm x 190 mm x 70 mm (10.5 in x 7.5 in x 2.8 in) 1.2 kg (2.6 lb) 2.2 kg (4.8 lb) For more information, go to www.fluke.com/au/scopemeter ScopeMeter Test Tools 77
