Download - ADWA Instruments

LOGGING / STORING
This feature allows the user to log automatically pH &
Rel mV or ISE & Rel mV measurements, together with
the temperature reading. All logged data can be transferred to a PC through the USB port.
The maximum logging space is 1000 record locations
(samples). This can be divided from 1 up to 50 lots (one
lot can use all the free space). The lot ID can be from 1
to 99 (after 99 it restarts from 1). A maximum of 50 lots
can be stored, even if there is free space available.
Note: When the logged lots are more than one, the total number of samples can be less than 1000,
because the logging memory is divided in pages
of 20 samples each.
The logging interval can be set from 5 seconds to 180
minutes (see “Setup” section for details). Up to 50 record
locations are also provided for the log-on-demand.
LOG-ON-DEMAND
(LOGGING/STORING THE CURRENT DATA)
To store the current reading into the
instrument memory, press STORE
from normal measurement mode.
50