Download - Farnell

CC2431
1.
Introduction
This CC2431DK User Manual describes how to use the software and hardware included in
the CC2431 Development Kit.
Please refer to the Quick Start Guide for a brief introduction on how to get started using the
development kit.
2.
About this manual
This manual contains some of the theoretical material needed to develop a positioning system
based on CC2431 and gives a brief introduction to the software provided in the kit.
3.
Definitions
Blind Node
Reference Node
GUI
Chipcon Packet Sniffer
Z-location Engine
RSSI
TIMAC
SOC_BB
CC243xEM
CC2430-F128
A node using CC2431 and the Location Engine to calculate its
own position.
A node located on a static location.
Graphic User Interface
A PC tool to visualize traffic on radio
A PC tool used to configure and display location engine results
Received Signal Strength Indicator
Texas Instruments Media Access Control, a SW protocol that
handles IEEE 802.15.4 data handling
System on Chip Battery Board
CC2430/ CC2431 Evaluation Module, a small plug-in module
for SmartRF04DK, should be used as reference design for RF
layout.
CC2430 with 128 kB FLASH
SWRU076D
Page 4 of 32