Download SARITOR Self Propelled

Transcript
8 - Technical Specifications
AutoSteer Hose Connections
The required hose connections are as follow;
• Connect equal length hoses between A & B ports on Hyd Control Block to Orbiter unit
• Connect Pressure Hose with 90 deg elbow on to straight end of tee piece with press sensor fitted. Connect straight
end of hose to P port on Orbiter
• Connect Pressure Sensor tee to EF port on Hydraulic Control Block
• Connect tank hose between T port on Hyd Control block and Tee piece bank at Hydraulic reservoir tank
Refer to the following images for further information
8. 11