Download PiiGAB - Papouch

T H E
4.8
M O D E R N
M - B U S
T E C H N O L O G Y
Meter installations
When all previous steps have been made the gateway is ready to communicate out on the MBus loop. To get there in the Wizard please choose Test, search and configure meters.
This choice makes you send a so called ”SND_NKE” question in order to test the
communication as well as to zero out the meter to be able to read the first telegram.
Figure 4-9
900M.E.1.12
Figure 4-10
This choice presents the meter’s primary and secondary address. If you don’t know which
address the meter has used choose “test and diagnose” and you will receive information on
20