Download ECLERNET MANAGER v3.02

Volume Control selected in the previous example (in orange)

X-FOCUS VOLUME: X-FOCUS (“Cross-Focus”) means the active crossing point in a
carousel list of sound sources (inputs) for the assigned output. It is selected by
programming the WPTOUCH unit. In other words, when a WPTOUCH is programmed for
its Selection mode to choose an input in a carousel list, the X-Focus is the selection made
at a given time, i.e. the input selected as audio content for the assigned output.
So, if you select the X-FOCUS VOLUME for the VOLUME function and have a look at
what happens in the matrix, the WPTOUCH always operate the rotary volume control
located at the intersection of the selected input and assigned output.
Example: let's create a carousel list of sound sources, or matrix inputs (see section: 7.11. Carousel lists
for MIMO88) including inputs 1. CD, 2. RADIO and 5. DVD, and let's assign a WPtouch managing the
output 7 of the matrix:
In "Selection" mode, you can cyclically select which input (1, 2 or 5) will be sent to output 7. Once one of
them is selected, the wheel controls in Volume mode the crossing point of the selected input (1, 2 or 5)
and output 7: the amount of signal sent from the selected input to output 7. If the selection changes, the
volume wheel controls the new input/output crossing point selected.
111