Download WindLDR Manual

Transcript
WLDR ReferenceBook Page 5 Thursday, April 5, 2001 3:36 PM
WindLDR™ Reference Manual
10-5
In the Character or Hex decimal field, enter the character data
which will display in the S1 field of the Transmit [TXD] dialog
box.
Once the dialog box is complete, click the OK button to save the
data. To back out of this dialog box without selecting a data, click
the Cancel button.
If the Variable [Data register] option is selected in the Type field of the
Data Type Selection dialog box, then the Variable [Data register] dialog
box will display.
© 2001 IDEC Corporation
10. Transmit/Receive