Download AT Gold - Garrett

AT GOLD CONTROL PANEL
Target ID
Legend
indicates
metal types.
High Resolution
Iron Discrimination
Digital
Target ID
Target ID
Cursor
(also shows
indicates
ground balance
probable
settings while in target identity.
GND-BAL mode.)
indicates level of iron
discrimination selected.
Mode
Indicator
QUICK START GUIDE
Lower Scale
indicates notch
discrimination pattern.
Depth Indicator
indicates depth of a
coin-sized target.
2.Power ON.
Press and release the ON / OFF Power button. The AT Gold
powers on in the last mode used and is ready to search.
(Factory default mode is ALL METAL.)
3.Select Mode.
Use the Mode Pushbutton to select a different detection
mode, if desired.
Sensitivity
Setting
4.Adjust settings.
Adjust Sensitivity or Discrimination settings, if desired.
Iron Disc
Pushbutton
to change iron
discrimination level.
Iron Audio
Pushbutton
to toggle Iron
Audio ON/OFF.
Pinpoint
Pushbutton
Press and hold
to pinpoint.
ON / OFF Power: hold 1 second
to turn power on/off.
MODE: press quickly to toggle
through detection modes.
RESET: hold 5 seconds to restore
factory settings.
FREQ
Pushbutton
to toggle through
4 frequencies.
Sensitivity
Pushbutton
to change sensitivity.
4
1. Install batteries.
The AT Gold operates with four (4) AA batteries which are
already installed by Garrett.
Garrett Metal Detectors
Battery Level
Indicator
5.Begin scanning.
Lower the searchcoil to within 1" (2.5cm) of the ground and
scan the coil left and right at approximately 3 feet (1m)
per second.
GROUND BALANCE
Pushbutton
Press and hold for fast auto
ground balance or use with
THRESHOLD (+) or (-) for
manual ground balance.
THRESHOLD Pushbutton
to change the level of
background sound.
AT Gold™
5