Download user manual, click here

Transcript
Chapter 3: Installation
3.3.3. TO3
Figure 3.8 shows the TO3 housing connector; the pinout is detailed in table 3.3. TO3L and TO3-W housing have identical pinouts. The polarity of the laser connection is
specified on the laser datasheet.
Figure 3.8.: TO3 housing connector.
Pin nb
Purpose
1
2
3
4
5
6
7
8
TEC +
Thermistor
Thermistor
laser bondpad
laser substrate
Not connected
Not connected
TEC -
Table 3.3.: TO3 housing pinout.
Note: A LPES L ASERS does not produce cables for TO3 housings.
36
QCL user’s manual v3.1.2