Download User`s Manual

Generalities – Safety
LT-6002DA six channels digital dimmer Pack is in compliance with Europe safety
standard EN60950-1:2006 and EN60204-1:2006. It is categorized as Class I
equipment, designed and produced in accordance with relevant safety standards,
and provided with compulsory safety grounding by local standards. To prevent any
risk of electric shock, do not remove any cover or part of the enclosure. Access to
internal parts is not required for normal operation. If damaged, equipment must be
repaired and maintained by professional service personnel exclusively. Disconnect
from external power supply prior to the opening for inspection or maintenance.
WARNING!
LETHAL VOLTAGES ARE PRESENT INSIDE! PAY ATTENTION TO
YOUR SAFETY! INSTALLATION, DEBUG, AND MAINTENANCE MUST
BE OPERATED BY PROFESSIONAL PERSONNEL!
EVERY USER SHOULD READ THE MANUAL CAREFULLY BEFORE
OPREATION AND COMPLY WITH THE REQUIREMENTS.
Important Notice for Cables
Power supply cables and connectors are important parts of the safety means for the
equipment.
z
A main circuit breaker, or fuses shall be provided at the power supply terminal of
the cables to cut off the power supply; never touch or contact the power cables;
z
Ensure the cable and the connectors are intact, confirm that no damage to the
cables exists at each installation and regular checks;
z
Do not connect the cables with the signal lines.