1
Download Icon: Smith Machine
Transcript
32. Tighten three Weight Storage Tubes (67) onto a Rear Upright (12). 32 Attach the remaining three Weight Storage Tubes (not shown) onto the other Rear Upright (12) in the same way. 67 12 12 67 67 33. Attach an Upright Pin/Tether (28) to a Weight Rest (26) with an M4 x 16mm Self-tapping Screw (147). Hold the Weight Rest against one of the Front Uprights (11), and fully insert the Upright Pin into the Weight Rest and into one of the holes in the Front Upright. Do not overtighten the Screw; the Tether must rotate easily. 33 26 28 147 Attach an Upright Pin/Tether (28) to a Weight Spotter (29) with an M4 x 16mm Self-tapping Screw (147). Hold the Weight Spotter against the Front Upright (11), and fully insert the Upright Pin into the Weight Spotter and into one of the holes in the Front Upright. 11 28 147 29 Attach the other Weight Rest (not shown) and the other Weight Spotter (not shown) to the other Front Upright (not shown) in the same way. 19
