1
Download 203 Pump
Transcript
Users Manual Parts Catalog 2.0A-20001-E01 Identification Code for Plug-Type Fittings (Quicklinks) Examples WEK GEK SWVZ GS TS 65006510654065806540- -6-4-6-6-6- M8x1 R1/8 M10x1 S01 S02 S01 S02 S01 Fitting type abbreviation Type designation (manufacturer) Tube diameter (mm) Male thread, tapered (if any) Special designs Quicklincs, Push-in Type Male connector, push-in type Model Tube diameter Part no. GEK 6510-4-M 6x1-S01 GEK 6510-4-M 8x1-S01 GEK 6510-4-M 10x1-S01 GEK S6510-4-1/8-S01 4 4 4 4 mm mm mm mm 226-13752-3 226-13752-1 226-13752-2 226-13752-4 GEK 6510-6-M 6x1-S01 GEK 6510-6-M 8x1-S01 GEK 6510-6-M 10x1-S01 GEK 6510-6-1/8-S01 6 6 6 6 mm mm mm mm 226-13752-8 226-13752-7 226-13752-6 226-13752-9 Design with knurled collar 1111a96 Important: Use this fitting only for the connection of the lubrication points. The fitting is designed only for the connection of the pressure plastic tube (Ø 6 x 1.5 mm). Male connector, push-in type, with reinforced collar Design with reinforced collar GEKV 6510-6-M6x1-S03 6 mm GEKV 6510-6-M8x1-S03 6 mm GEKV 6510-6-M10x1-S03 6 mm GEKV 6510-6-1/8-S01 6 mm 226-14111-4 226-14111-2 226-14111-3 226-14111-1 Subject to change without notice Important: Use this fitting only for the connection of the lubrication points, if the pressure plastic tube (Ø 6 x 1,5 mm) will be replaced by high pressure plastic hose (Ø 8.6 x 2.3 mm). 4138a97 Page 33 of 80 LINCOLN GmbH Postfach 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
