Download USB2Mini User Manual
Transcript
Technical Specifications ELECTRICAL Range over CAT5 UTP © Copyright 2014 SmartAVI, All Rights Reserved Notice 150 ft. USB DATA USB Fixed Data Rate 480Mbps USB Version Compatibility 2.0 and 1.1 USB Connector Type (TX) (1) Type B USB Connector Type (TX) (4) Type A UTP DATA Signal Type LVDS Connector Unshielded RJ45 The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose. User Manual SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced or translated into another language without prior written consent from SmartAVI. USB2Mini POWER External or via USB 5V DC @ 2mA Connector 2.1mm DC jack (center+ve) PHYSICAL Dimensions 3.375”x3.375”x1.5” Weight .14lb The USB2Mini extends USB 2.0 up to 150 ft. from the computer using a single CAT5 Cable 11651 Vanowen St. North Hollywood, California 91605 Phone: (818) 503-6200 Fax: (818) 574-5581 www.smartavi.com Introduction Introduction The USB-100 extends USB up to 275ft using a single SmartAVI’s standard USB unshielded CAT5USB2Mini cable withextends data rates up to 12Mbps. (Universal Serial Bus) 2.0 signals up to 150 feet using a single CAT5 cable. The USB2Mini supports all USB 2.0 high-speed devices, from keyboards to printers, and will operate on Windows®, Mac and Linux® operating systems. An integrated four-port Features hub allows for multiple devices to be connected to • Extends USB port to 275 feet from thehubs can be the USB2Mini at up once. Additional USB computer. added, increasing the amount of devices that can • Uses easy to into install, be plugged theinexpensive USB2Mini. CAT5. • Fully compliant with USB 1.1 specifications. Features • Supports 1.5 and 12 Mbps data rate. • Uses a single CAT5 UTP2.0 cable between transmitter • Supports all USB and1.1 Devices and receiver. Transparently • Bus powered transmitter unitetc.) (Flash Drives, Printers, • Fully transparent (does not use any emulation). • Supports USB 1.1 keyboard and mouse • Compact size. • Works on Windows, Mac and Linux Operating • Supports MAC, PC and SUN. Systems • Plug and play. Four-Port Hub • Integrated • • • Bus-Powered Local Unit Power Adaptor for Remote Unit Plug-and-Play Ready Up to 150 ft. USB2Mini (TX) CAT5/5e/6 Cable USB2Mini (RX) Local Computer USB Devices What’s in the box? USB-100 Part No. Description Please check the contents of the package before USB-MN-S USB CAT5 Extender Link. Includes: beginning installation. Qty [USB-TXMN, USB-RX1MN, & (CCUS& PS5VD2A]Part Number Description BAB06) 1 USB-100 Transmitter USB-TX100 1 USB-100 Receiver USB-RX100 1 6’ USB A-B Cable CCUSBAB06 3. 4. Connect the receiver to the peripheral device using the included USB-Hub. Join the USB-100 units using standard CAT5 UTP cable. Installation and Operation Connecting the Transmitter 1. 2. Connect the transmitter to the host using the A-B USB cable (included with the unit). The A side of the connector would go to the computer host and the B side would be connected to the transmitter. Note: You must connect the included USB-Hub to the receiver unit for the system to work properly. Note: The receiver provides remote power up to 500 mA to the connected peripherals. This power comes from the host computer and is passed by the transmitter to the receiver. In some applications, and external power supply is required. SmartAVI can provide a power supply for such cases with the receiver and transmitter units.