Download CutList Bridge User`s Guide
Transcript
I next repeat this process for the remaining Sub-Assemblies. The only thing left is to select individual parts that need special Notes or Tags. Can Rotate, Banding and Info are not typically useful in furniture pieces, but they may on occasion be used. I may also want to use some of the Cabinet/Resize Mode features on one or more parts. The door is a part where I many want to use the Resize feature. Even though we know the exact dimensions of the door per the model, often we want to oversize the door and cut it to final dimension when we have completed the waist and can measure the opening. I am going to resize the door by ½” in width and 1” in length. The Cabinet/Resize Mode, while used primarily on cabinets, is often useful for other types of designs. The resulting CutList Plus fx cut list is shown below. There are 49 parts and not all could be shown in this image. Copyright 2012 - 2015 Joseph P. Zeh, Chiefwoodworker, Swamp Road Wood Works - All Rights Reserved Page 40 of 64