Download Cosmetic Products Notification Portal (CPNP) User Manual

Cosmetic Products Notification Portal (CPNP)
User Manual
This manual is intended for all CPNP users.
It explains the main functions of the CPNP.
'CPNP users' means:
- Cosmetic industry responsible persons and users acting on their behalf - referred to in this
User Manual as 'responsible persons';
- Distributors who make available in a Member State a cosmetic product already placed on the
market in another Member State and translate, on their own initiative, any element of the labelling
of that product in order to comply with national law - referred to in this User Manual as
'distributors';
- National Competent Authorities, in charge of market surveillance, market analysis, evaluation
and consumer information regarding cosmetic products - referred to in this User Manual as
'competent authorities';
- Poison Centres or similar bodies, where such centres or bodies have been established by
Member States - referred to in this User Manual as 'poison centres'.
Manual readers are kindly invited to report any remark on this User Manual to
[email protected]
Last update on 09/01/2012
1
Table of contents
I. INTRODUCTION AND SYSTEM REQUIREMENTS............................................................................... 3
I.1 INTRODUCTION ................................................................................................................................... 3
I.1.1 Key terms ...................................................................................................................................... 3
I.1.2 What is the Cosmetic Products Notification Portal (CPNP)?....................................................... 5
I.1.3 What information needs to be entered into the CPNP? ................................................................ 5
I.1.4 What the CPNP does with the information entered? .................................................................... 5
I.1.5 When information has to be entered into CPNP? ......................................................................... 5
I.2 SYSTEM REQUIREMENTS.................................................................................................................. 6
I.3 REGISTRATION .................................................................................................................................... 6
I.3.1 General overview of the workflow ............................................................................................... 6
I.3.2 How do I get my ECAS login and password? .............................................................................. 8
I.3.3 How can I login/request an access to CPNP? ............................................................................. 12
II. USING CPNP............................................................................................................................................. 17
II.1 CPNP HOME PAGE............................................................................................................................ 17
II.1.1 Confidentiality aspects .................................................................................................................. 17
II.1.2 Navigation buttons ........................................................................................................................ 18
II.2 NOTIFICATIONS PURSUANT TO ARTICLE 13(1) and (2) -SINGLE COMPONENT PRODUCT
..................................................................................................................................................................... 20
II.2.1 ‘General information’ tab.............................................................................................................. 21
II.2.2 ‘Product details’ tab ...................................................................................................................... 27
II.3 NOTIFICATIONS PURSUANT TO ARTICLE 13(1) and (2) - MULTI-COMPONENT PRODUCT
..................................................................................................................................................................... 46
II.4 NOTIFICATIONS PURSUANT ARTICLE 13(3) - DISTRIBUTION .............................................. 48
II.5 SEARCH TOOLS ................................................................................................................................ 49
II.5.1 Simple search ................................................................................................................................ 49
II.5.2 Advanced search ........................................................................................................................... 50
II.5.3 Distribution search ........................................................................................................................ 52
II.5.4 Responsible person search ............................................................................................................ 53
II.6 VIEW, EDIT or DUPLICATE NOTIFICATIONS PURSUANT ARTICLE 13(1) and (2) ............... 53
II.6.1 - View product................................................................................................................................... 54
II.6.1.1 Single-component products........................................................................................................ 55
II.6.1.2 Multi-component products ......................................................................................................... 56
II.6.2 - Edit product..................................................................................................................................... 58
II.6.3 - Duplicate a product ......................................................................................................................... 59
II.7 VIEW AND EDIT NOTIFICATIONS PURSUANT ARTICLE 13(3)............................................... 60
ANNEX I: Rules on specific ingredients of concern and/or the pH value ..................................................... 61
ANNEX II: Frame formulations ..................................................................................................................... 69
ANNEX III: Categories of cosmetic products .............................................................................................. 222
2
I. INTRODUCTION AND SYSTEM REQUIREMENTS
I.1 INTRODUCTION
I.1.1 Key terms
Some key terms used in this User Manual are reproduced here for ease of reference:
I.1.1.1 Cosmetic product
‘Cosmetic product’ means any substance or mixture intended to be placed in contact with
the external parts of the human body (epidermis, hair system, nails, lips and external
genital organs) or with the teeth and the mucous membranes of the oral cavity with a view
exclusively or mainly to cleaning them, perfuming them, changing their appearance,
protecting them, keeping them in good condition or correcting body odours.
I.1.1.2 Distributor
'Distributor' means any natural or legal person in the supply chain, other than the
manufacturer or the importer, who makes a cosmetic product available on the Community
market.
I.1.1.3 Making available on the market
'Making available on the market' means any supply of a cosmetic product for distribution,
consumption or use on the Community market in the course of a commercial activity,
whether in return for payment or free of charge.
I.1.1.4 Placing on the market
‘Placing on the market’ means the first making available of a cosmetic product on the
Community market.
I.1.1.5 Importer
‘Importer’ means any natural or legal person established within the Community, who
places a cosmetic product from a third country on the Community market.
I.1.1.6 Nanomaterial
‘Nanomaterial’ means an insoluble or biopersistant and intentionally manufactured
material with one or more external dimensions, or an internal structure, on the scale from
1 to 100 nm
I.1.1.7 Frame formulation
‘Frame formulation’ means a formulation which lists the category or function of ingredients
and their maximum concentration in the cosmetic product or gives relevant quantitative
and qualitative information whenever a cosmetic product is not covered or only partially
covered by such a formulation.
I.1.1.8 Responsible person
3
For a cosmetic product manufactured within the Community, and not subsequently
exported and imported back into the Community, the manufacturer established within the
Community shall be the responsible person.
The manufacturer may designate, by written mandate, a person established within the
Community as the responsible person who shall accept in writing.
Where, for a cosmetic product manufactured within the Community, and not subsequently
exported and imported back into the Community, the manufacturer is established outside
the Community, he shall designate, by written mandate, a person established within the
Community as the responsible person who shall accept in writing.
For an imported cosmetic product, each importer shall be the responsible person for the
specific cosmetic product he places on the market.
The importer may, by written mandate, designate a person established within the
Community as the responsible person who shall accept in writing.
The distributor shall be the responsible person where he places a cosmetic product on
the market under his name or trademark or modifies a product already placed on the
market in such a way that compliance with the applicable requirements may be affected.
The translation of information relating to a cosmetic product already placed on the market
shall not be considered as a modification of that product of such a nature that compliance
with the applicable requirements of this Regulation may be affected.
I.1.1.9 CMR substances
Substances classified as carcinogenic, mutagenic or toxic for reproduction pursuant to
Regulation (EC) No 1272/20081.
I.1.1.10 CosIng
It is a European Commission database that contains information on cosmetic substances
and ingredients2.
I.1.1.11 SAAS
It is the Sanco Autentication and Authorisation System.
It provides the user with a profile and access rights for a specific European Commission
application. This application manages specifically the access rights.
I.1.1.12 ECAS
It is the European Commission Authentication Service.
It provides the user with a login and password to connect to multiple European
Commission applications. This application manages specifically logins and passwords.
I.1.1.13 Local administrator
1
2
OJ L353, 31.12.2008, p.1
http://ec.europa.eu/consumers/cosmetics/cosing/
4
A local administrator is the person in charge of managing the access requests of a
specific organisation.
I.1.1.14 Organisation
An organisation means either a 'responsible person' (or its subcontractors), a 'distributor',
a 'competent authority' or a 'poison centre'.
I.1.2 What is the Cosmetic Products Notification Portal (CPNP)?
The CPNP is the online notification system created for the implementation of Regulation
(EC) N° 1223/2009 of the European Parliament and of the Council on cosmetic products3.
It is important to note that the fact that a product has been succesfully notified
through the CPNP does not necessarily mean that the product in question fulfills
all the requirements of the Regulation (EC) N° 1223/2009 of the European
Parliament and of the Council on cosmetic products.
I.1.3 What information needs to be entered into the CPNP?
Article 13 of Regulation (EC) N° 1223/2009 lists the information that the responsible
persons and, under certain circumstances, the distributors of cosmetic products shall
notify through the CPNP about the products they place or make available on the
European market.
I.1.4 What the CPNP does with the information entered?
The CPNP makes some of this information available electronically to the competent
authorities (for the purposes of market surveillance, market analysis, evaluation and
consumer information) and to the poison centres, or similar bodies established by
Member States (for the purposes of medical treatment).
I.1.5 When does information have to be entered into CPNP?
As from 11 January 2012, a responsible person will have the possibility to notify through
CPNP, by way of derogation from Directive 76/768/EEC, the information referred to in
Article 13(1) and (2) of Regulation (EC) No 1223/2009. As from 11 July 2013, the use of
CPNP will become mandatory.
As from 11 July 2013, a distributor who makes available in a Member State a cosmetic
product already placed on the market in another Member State and translates, on his own
initiative, any element of the labelling of that product in order to comply with national law,
3
OJ L342, 22.12.2009, p.59
5
will have to submit into CPNP the information referred to in Article 13(3) of Regulation
(EC) N° 1223/2009.
Where a cosmetic product has been placed on the market before 11 July 2013, but is no
longer placed on the market as from that date, and a distributor introduces that product in
a Member State after that date, that distributor will have to communicate the information
referred to in Article 13(4) of Regulation (EC) N° 1223/2009 to the responsible person. On
the basis of that communication, the responsible person shall notify through CPNP the
information referred to in paragraph 1 of Article 13 of Regulation (EC) N° 1223/2009,
where notifications according to Article 7(3) and Article 7a (4) of Directive 76/768/EEC
have not been carried out in the Member State in which the cosmetic product is made
available.
I.2 SYSTEM REQUIREMENTS
The following items are required to connect to the CPNP:
- An Internet connection;
- A computer screen resolution of at least 1024 X 768 pixels.
The CPNP is optimized for Microsoft Internet Explorer 7 or Mozilla Firefox 2 (Internet
Explorer with JavaScript and cookies enabled);
Note: this User Manual explains the online use of the CPNP. In the future, there will be
also the possibility for Responsible Persons to notify directly from machine-to-machine.
This will be further detailed in this User Manual once this functionality is implemented.
I.3 REGISTRATION
In order to access the CPNP, the user needs a user login and password.
Two systems are needed:
- The European Commission Authentication Service (ECAS).
This system provides the user with a login and password to connect to multiple European
Commission applications.
- The SANCO Authentication and Authorisation System (SAAS).
This system provides the user with a profile and access rights for a specific European
Commission application, in this case the CPNP.
I.3.1 General overview of the workflow
A user that accesses the CPNP for the first time need to follow a 3 step-procedure
1.
Create his ECAS login/password
6
2.
3.
Request an access to CPNP
Connect to CPNP
All CPNP users should be part of what is called an 'organisation'. An organisation means
either a 'responsible person' (or its sub-organisations), a 'distributor', a 'competent
authority' or a 'poison centre'.
There are two situations that a new user may face:
1.
The organisation she/he belongs to already exists in SAAS
In this situation, the user only needs to ask for an access to this organisation. The
local administrator(s) of this organisation will have the possibility to accept or
refuse the access request.
2.
The organisation does not yet exist in SAAS.
In this situation, the user has to create the organisation in SAAS.
The Commission services have to validate this new organisation and to accept or
refuse the access request submitted by the user.
The user who creates a new organisation becomes automatically a local
administrator of this organisation and in the future he will be able to manage all
access requests related to that organisation.
Note: A local administrator can designate additional local administrator(s) for her/his
organisation and for each of its sub-organisations (see section 1.3.3.3 for further details)
provided that these future new local administrator(s) already exist in SAAS and have
access to CPNP for the (sub-) organisation. To do so, the local administrator has to select
the future new local administrator in the list of active access profiles, in the main page of
SAAS, click on the login of the the future new local administrator and tick the checkbox
"Local admin".
As any other local administrator, the new local administrator(s) will be able to accept or
refuse access requests, designate other local administrators, create new
suborganisations, etc.
For security reasons, only local administrators who have been formally nominated by the
Member States beforehand will be allowed to create an organisation 'Competent
Authority' or an organisation 'Poison Centre' in SAAS.
7
I.3.2 How do I get my ECAS login and password?
8
I.3.2.1 Connect to the ECAS registration website
The user has to connect to https://webgate.ec.europa.eu/aida/selfreg and complete the
following fields:
Username
First name
Last name
E-mail
Preferred language
To submit his request, the user has to:
1.
Tick the checkbox to aknowledge that he has read and understood the privacy
statement
2.
Type the security characters displayed in the image.
Once the registration is sent, the system will display the following confirmation page:
9
I.3.2.2 Register a password
After the submission of the ECAS registration form, an e-mail will be sent to the user email address. This e-mail will allow the user to complete the registration process by
choosing a password.
Click on the link and you will
be automatically redirected to
the Password registration
page
Once the user has clicked on the link specified in the e-mail, the following page will be
displayed:
10
The user has then to type the password of her/his choice, following these specific
recommendations keeping in mind that the password may not include his username and
must contain at least 10 characters chosen from at least three of the following character
groups (no other characters are permitted apart from the white space):
Upper case: A to Z
Lower case: a to z
Numeric 0 to 9
Special character:
Once the user has entered her/his password and clicked on the submit button, a
confirmation page will be displayed:
11
I.3.3 How can I login/request an access to CPNP?
I.3.3.1 Login to CPNP using your ECAS credentials
The user has to open a new browser and connect to CPNP at the following address:
https://webgate.ec.europa.eu/cpnp
The system will automatically redirect the user to the ECAS login page.
ECAS will first ask the user if she/he works for a European institution or not.
The user has to:
1.
Select 'I do not work for a European institution';
2.
Tick the checkbox 'Remember my choice'. Next time the user will try to
connect to CPNP (or any other Commission's application), ECAS will not ask
her/him again if he works for the European institutions or not;
3.
Press the 'Select' button.
12
The user has to enter her/his ECAS username and password and click on
user will be then redirected to the following confirmation page:
After a few seconds, ECAS will redirect the user to CPNP.
13
. The
If the user has no access to the CPNP, or if her/his access request has not yet been
validated by a local administrator, she/he will see the following screen.
Click on the link to submit
a new access request form
If the user already has access to CPNP, she/he will be redirected to the CPNP
homepage.
I.3.3.2 Request an access to CPNP
On the "Access denied" page, there is a link that allows the user to be redirected to SAAS
and submit a new access request form.
Once redirected to SAAS, the user will see the following screen, allowing her/him to
submit a new access request:
14
In a first dropdown, the user will see that the 'Cosmetic Products Notification
Portal' application has been selected by default. Please do not select another
application.
Then the user has to select an organisation in the list of existing organisations for CPNP.
If the organisation she/he belongs to is not yet created in SAAS, she/he can create it by
clicking on the 'Create organisation' button.
The user has then to select the access profile she/he is entitled to have:
15
•
•
•
•
Competent Authority;
Distributor;
Poison Centre;
Responsible Person.
When the user clicks on the 'Submit' button, his request is sent to:
1.
2.
the local administrator(s) of the selected organisation (if is not a new organisation)
and the European Commission services.
the European Commission services only (if it is a new organisation)
Note: access can be granted also for a limited period of time.
Note: all organisations created in SAAS are visible to all SAAS users.
Once the registration request has been completed, the user sees the following page:
On this page, the user can see all her/his current access requests concerning CPNP, but
also a summary of all her/his previous access requests (active or locked).
1.3.3.3 Delegation mechanisms in SAAS
16
A Responsible Person can decide to delegate the notification of its products to
suborganisations via the subdelegation mechanism implemented into SAAS. This
function is useful for instance when notifications are to be done by another entity (e.g. a
consultant) on behalf of the Responsible Person, or when a Responsible Person wants to
separate its notifications by brands or type of products.
Organisations in SAAS are structured as follows:
- The level 1 is the 'parent' organisation. It is always the Responsible Person.
- Below level 1, there is the possibity to have suborganisations linked to the Responsible
Person. These suborganisations can enter notifications into the CPNP on behalf of that
Responsible Person.
The notifications done by a user belonging to a suborganisation are visible and editable
by any user of this suborganisation. These notifications are also visible (but not editable)
by the Responsible Person.
How to create a sub-organisation in SAAS?
There are two possibilities to create a suborganisation in SAAS:
- when a user request an access to CPNP, she/he has the possibility to select an existing
suborganisation or to create a new one. The local administrator of the 'parent'
organisation will have to accept or refuse the creation of the new suborganisation and any
access to that suborganisation.
- A local administrator of an organisation also has the possibility to create new
suborganisations by clicking on the 'Create new' button.
II. USING CPNP
II.1 CPNP HOME PAGE
Depending on the user profile (i.e. responsible person, distributor, competent authority or
poison centre), the home pages and subsequent screens may differ. This is detailed
throughout this user manual.
II.1.1 Confidentiality aspects
Some of the data contained in CPNP are business confidential information.
For this reason, the following warning message is displayed on the home page for the
competent authorities and for the poison centres, when they connect to the CPNP:
17
Competent authorities and poison centres will have to click on
be able to proceed further.
to
II.1.2 Navigation buttons
The following tabs may be displayed on the home page, depending on the user profile:
II.1.2.1 ‘Home’ tab
It allows the users to go back to the homepage.
II.1.2.2 ‘Products’ tab
- Notify a single component product
This menu item is only displayed for the responsible persons.
It allows the responsible persons to create notifications for single component products.
- Notify a multi-component product
This menu item is only displayed for responsible persons.
It allows the responsible persons to create notifications for products that contain several
components.
- Advanced search
This menu item is displayed for responsible persons, competent authorities and poison
centres.
It allows these users to search for products or components on the basis of several criteria.
- Simple search
18
This menu item is displayed for responsible persons, competent authorities and poison
centres.
It allows these users to search for products or components, using key words.
- Responsible person search
This menu item is displayed for competent authorities and poison centres only.
It allows these users to search for the responsible persons existing in the system, and
then to see all their submitted notifications.
Important notice
A responsible person or a distributor can search for and display only the products it (or a
user acting on its behalf) has entered into the system.
This means that the products of one responsible person or of one distributor are not
accessible to another responsible person or distributor in the system. A responsible
person or a distributor can search for its draft and submitted notifications.
Competent authorities and poison centres can search for all submitted notifications
contained in the system. Draft notifications are not accessible to competent authorities
and poison centres.
II.1.2.3 'Contact persons' tab
This tab is displayed for responsible persons onl.
It allows the responsible persons to manage the contact details of the contact persons
associated to their organisation on a bulk basis.
II.1.2.4 'Distributors' tab
This tab is displayed for distributors only.
It allows the distributors to enter distribution notifications and to search for the
notifications they have already entered in the system.
II.1.2.5 ‘Useful links’ tab
This tab is displayed for all users.
It shows links to CPNP User Manual, the CosIng database and the Regulation on
cosmetic products.
19
II.1.2.6 ‘Privacy Statement’
This item is displayed for all users.
It shows the CPNP privacy statement.
II.1.2.7 ‘Contact’
This item is displayed for all users.
It allows the user to send an email to the CPNP functional mailbox.
II.1.2.8 ‘Profile’
This item is displayed for all users.
It allows the users to check their profile in CPNP
II.1.2.9 ‘Language’
This item is displayed for all users.
It allows the users to change the interface language.
Note: The CPNP interface has been initially created in English and then translated.
Therefore, in case of doubt, please use the English version as reference and do not
hesitate to report to [email protected] any inconsistency you would find in any
other language.
II.1.2.10 ‘Log out’
This item is displayed for all users
It logs the user out of the system.
II.2 NOTIFICATIONS PURSUANT TO ARTICLE 13(1) and (2) -SINGLE
COMPONENT PRODUCT
This function is only accessible to the responsible persons.
A 'single component product' refers to a product that is composed of one single element
(e.g. a single bottle of shampoo).
To create a notification for a single component product, the responsible person has to
click on ‘Notify a single component product' in the ‘Products’ tab:
20
The general form for the notification of a single component product will be displayed.
Two different tabs are available: ‘General information’ and ‘Product details’.
II.2.1 ‘General information’ tab
The ‘General information’ tab allows the responsible person to enter the following
information about the product:
II.2.1.1 Product name
The product name is a crucial element of the notification since it will be often used by
competent authorities or by poison centres to search for a product in the CPNP.
The product name must be detailed enough to enable the specific identification of the
cosmetic product.
The product name should include the trade mark/brand, the product line and the
specific name of the product as they appear on the product. The complete name should
include the function unless it is part of the specific name of the product.
Example:
1. - Trade Mark / Brand
2. - Product Line
21
3. - Specific name (function included)
The complete name of the product is:
Trade Mark / Brand + Product Line + specific name (function included), e.g.:
Trade Mark / Brand Repair &Shine smoothing cream
Trade Mark / Brand Repair &Shine smoothing conditioner
Trade Mark / Brand Repair &Shine smoothing shampoo lemon
Trade Mark / Brand Repair &Shine smoothing shampoo orange
Trade Mark / Brand Repair &Shine smoothing shampoo vanilla
II.2.1.2 Language
When the product is made available on the market with a name translated in different
languages, each of these names has to be mentioned in the notification together with the
corresponding language (selected via the drop down menu).
The symbol
next to the language drop down menu allows the responsible person
to add product name translation(s) and to select the corresponding language(s). If the
responsible person wants to delete a product name translation, it has to click on the
button next to the corresponding translation.
If the product name is the same in all languages, the responsible person can indicate this
name only once and select ‘multilingual’ in the drop down menu.
22
When 'multilingual' has been selected, the following warning message will be displayed:
'Multilingual' cannot be used in case the product name is the same in some languages,
but different in others. In this case, all linguistic versions of the product name have to be
entered individually in the system. Even when the name is the same for some languages,
it has to be repeated indicating for each one the corresponding language.
II.2.1.3 Shades (if applicable)
To avoid unnecessary notifications, the responsible person may notify the different
shades of a product (e.g. different shades of a lipstick) into one single notification. This
can be done only if all these shades are fully covered by the information contained in the
notification.
Important notice
The different shades shall be indicated in the shades field and shall be clearly separated
by a " / " preceded and followed by a white space.
The translations of these shades in the different languages have to be indicated in the
shades field just below the corresponding linguistic version of the product name.
When some shades of a cosmetic product are not fully covered by the information
contained in the notification (e.g. different composition information), these shades must
be notified separately.
II.2.1.4 Product specifically intended for children under 3 years of age
The responsible person must indicate whether the product is specifically intended for
children under 3 years of age.
II.2.1.5 Responsible person details
23
The notification shall contain at least the name and the address of the responsible
person. These data appear on the left part of the screen under 'Responsible person'.
They are automatically retrieved from SAAS on the basis of the login of the user. When
the responsible person needs to update or correct its details, it has to be done in SAAS.
Access to SAAS is available from the profile item located at the top right of the CPNP
screen. Only local administrators can modify the responsible person details.
Important notice
In case the name and the address of the responsible person are not complete in SAAS,
the following warning message will be displayed and the responsible person will not be
allowed to enter any notification in the system until the information is complete.
II.2.1.6 Contact person details
For each notification, the responsible person has to indicate the contact details of a
physical person to contact in case of necessity.
In the notification form, the system will display the list of all the contact persons that are
linked to the responsible person.
If a contact person does not yet appear in the list of contact persons, this contact person
can be added by clicking on the button
and by entering the contact person details
into the system. All mandatory fields are indicated by a "*".
There are two buttons at the bottom right of the screen.
allows the responsible person to add the new contact person to the ongoing
notification.This contact person will become selectable in the drop down menu for future
notifications by this responsible person.
aborts the operation.
24
Note: As soon as a new contact person is created in the CPNP, an e-mail will be sent to
this contact person by the CPNP. This email contains information on data protection
aspects.
Important notice
All phone and fax numbers entered in the CPNP must include the international prefix
Example: 0032 2 296 93 62
A specific module has been created in the CPNP for the management of contact person
details on a bulk basis. To access this module the responsible person has to click on the
'Contact persons' tab on the top left of the screen.
By selecting 'List' in the Contact persons tab, the responsible person can then either
search for one contact person using the search field or display all contact persons by
clicking on 'All contact persons'. The responsible person can then edit the contact
person details (by clicking on
or delete them by clicking on ).
25
The responsible person can create new contact person(s) by selecting 'New contact
person' in the Contact persons tab.
II.2.1.7 Product no longer manufactured
When a product is no longer manufactured the responsible person may indicate it.
II.2.1.8 Product ready to go on the market or already on the market
If the product is ready to go on the market or is already on the market, the responsible
person has to tick the box.
If all mandatory fields are filled and the product is not indicated as being ready to go on
the market or already on the market, the responsible person will be allowed to submit its
notification without the original labelling and corresponding packaging being attached.
However, the following warning message will be displayed:
Important notice
To fulfil its legal obligations, the responsible person has to notify once the original
labelling, and, where reasonably legible, a photograph of the corresponding
packaging at the latest when the product is placed on the market.
II.2.1.9 Product imported in the Community
The responsible person has to indicate if the product is imported in the Community, and if
so, it has to select the country of origin in the drop down menu.
26
Important notice
There may be rare cases where the same product is imported from several countries.
In such cases, the responsible person shall make one notification per country of origin
and shall mention the country of origin into brackets in the product name.
Examples:
Trade Mark / Brand Repair &Shine smoothing cream (United States)
Trade Mark / Brand Repair &Shine smoothing cream (China)
Important notice
There may be rare cases where the same product may be both imported and not
imported.
In such cases, the responsible person shall make two different notifications, i.e. one
notification for the imported version of the product (specifying the country of origin into
brackets in the product name) and another notification for the non-imported version of the
product.
II.2.1.10 Member State of first placing on the market
The responsible person has to select the Member State of first placing on the market in
the drop down menu.
II.2.1.11 'Save as draft', 'Notify' and 'Cancel'
There are three buttons at the top and at the bottom of the screen.
: The notification is saved as draft but not notified.
A notification can be saved as draft without all the required fields being filled. To save a
notification as draft, at least a product/component name and the corresponding language
must be filled (indicated by "**").
27
: The notification is complete and will be made available to poison centres and
competent authorities. It will then be not possible to delete this notification from the
system. Only update or correction will be possible.
A notification can be notified only when all mandatory fields indicated by a "*" are filled in.
If some mandatory information is missing, the system will display a warning message and
will indicate the field(s) that still needs to be filled in.
: The ongoing operation is aborted.
II.2.2 ‘Product details’ tab
The product details tab is composed of three different sections:
II.2.2.1 Section CMR & Nanomaterials
In this section the responsible person has to indicate if the product contains:
- Substances classified as carcinogenic, mutagenic or toxic for reproduction (CMR), of
category 1A or 1B, under Part 3 of Annex VI to Regulation (EC) No 1272/2008, and
- Substances in the form of nanomaterials.
II.2.2.1.1 CMR
If the responsible person clicks 'yes' to the question ‘Does the product contain CMR
substances of category 1A or 1B?’, he has to indicate the ‘Name’ of the CMR
substance of category 1A or 1B and its ‘CAS’ or 'EC Number'.
To help the responsible person, the name and information on CAS and EC numbers will
be retrieved from CosIng, when available, but the responsible person remains
28
responsible for checking the completeness and the exactness of the information provided
and changing it where necessary. The responsible person can also manually type a CMR
substance of category 1A or 1B and its CAS and/or EC number if it is not included in
CosIng.
If there is more than one CMR substance of category 1A or 1B in the product, they can be
added by clicking on the button
.
Important notice
When retrieving information from CosIng, please note that there is no filter intended to
display only CMR 1A or 1B.
II.2.2.1.2 Nanomaterials
If the responsible person answers 'Yes' to the second question ‘Does the product
contain nanomaterials?’ the following screen will be displayed:
The CPNP will first ask the responsible person to answer two questions on the exposure
conditions:
- Is the product a rinse off or a leave on product?
- What is the exposure route (dermal, oral and/or inhalation)?
To add a nanomaterial to the notification the responsible person has to click on
.
A pop up page will appear and the responsible person can then search for the
nanomaterial into CosIng by entering at least 5 characters:
29
The responsible person can then select one of the proposed nanomaterials (by clicking
on the
button next to the nanomaterial to be added).
A new screen will appear and display the information retrieved from CosIng i.e. INCI,
IUPAC, INN, XAN, CAS number, EINECS and/or ELINCS. Here too, the responsible
person remains responsible for checking the completeness and the exactness of the
information provided and changing it where necessary.
Important notice
When retrieving information from CosIng, please note that there is no filter intended to
display only nanomaterials.
30
If the responsible person clicks on
notification.
, the nanomaterial will be added to the
If the responsible person clicks on
, the nanomaterial will not be added to the
notification and the responsible person will be redirected to the search screen.
By clicking on 'new nanomaterials' the responsible person can also type a nanomaterial
if the name is not included in CosIng.
II.2.2.2 Section Category & Frame formulation
In this section, the responsible person has to enter information on:
II.2.2.2.1 Category of cosmetic product
The responsible person has to select three category levels, starting by the level 1,
followed subsequently by level 2 and 3.
Important notice
In some rare cases, products may have several 'functions' that may make them fall under
different categories. In these cases, it is the primary function that has to be considered for
the categorisation of the cosmetic product.
The choice of a category at level 1 determines the categories available at level 2; the
choice of a category at level 2 will determine the categories available at level 3.
31
All existing categories are available for consultation in Annex III to this User Manual.
II.2.2.2.2 Physical form
The responsible person has to select the physical form of the product in the drop down
menu.
II.2.2.2.3 Special applicator/packaging
When the product is not presented in a typical non-pressurised cosmetic packaging (e.g.
bottle, jar, or sachet) but in a special applicator or packaging, the responsible person has
to mention it. This information might allow poison centres to modulate their risk
assessment in case of emergency medical treatment.
the responsible person can see the possible choices in terms of special
By clicking on
applicators and packagings.
If the answer is 'yes', the responsible person has to select the applicator/packaging from
the drop down menu.
If the responsible person selects ‘other’ in the drop down menu, the responsible person
is invited to suggest an applicator / packaging denomination (preferably in English). All
applicator / packaging suggested names will be taken into consideration by the CPNP
maintenance group in order to create new applicator/packaging names, or update the
existing ones, where necessary.
32
II.2.2.2.4 Formulation name
Depending on the categories selected at levels 1, 2 and 3, the CPNP will propose a list of
possible formulation names in a drop down menu.
The responsible person has to select the relevant formulation name. The formulation
name provides a more detailed product categorisation, which is made available to
poison centers only.
Important notice
Choosing a formulation name does not mean that the responsible person will notify his
product using a predefined frame formulation. After having selected a formulation name
the responsible person will still have the choice to notify using a predefined frame
formulation, an exact concentration declaration or a concentration ranges declaration.
If the responsible person selects ‘other’ the responsible person is invited to suggest a
formulation name (preferably in English). All suggested names will be taken into
consideration by the CPNP maintenance group in order to create new formulation names,
or update those existing, where necessary.
Only in cases where the responsible person has no suggestion for any formulation name,
the responsible person may simply repeat the name selected for the level 3 category.
II.2.2.2.5 Notification type
33
In the majority of the cases, the drop down menu will propose 3 options, i.e. 'predefined
frame formulations', 'exact concentrations' or 'concentration ranges'.
The symbol
reminds the responsible persons that all ingredients names shall be
expressed using INCI names, when available, and that all ingredients quantities shall be
expressed using % w/w
In some cases, depending on the categories of cosmetic products selected, there may be
no existing predefined frame formulation. In these cases, the CPNP will only propose two
options, i.e. 'exact concentrations' or 'concentration ranges'.
Important notice
Upon specific and individual request, whatever is the notification type chosen by a
responsible person for the notification of a cosmetic product pursuant Article 13(1) of
Regulation (EC) No 1223/2009, additional information should be provided to poison
centres or similar bodies, where such centres or bodies have been established by
Member States, to allow prompt and appropriate treatment in the event of difficulties.
II.2.2.2.5.1 Predefined frame formulation
A set of predefined frame formulations have been elaborated by an expert group
composed of representatives from poison centres, competent authorities, industry trade
associations and Commission’ services and are available for consultation in the Annex II
to this User Manual.
These frame formulations will be regularly updated in light of technical and scientific
progress, in accordance with Article 2(s) of Regulation (EC) No 1223/2009.
If the responsible person selects 'predefined frame formulation', the CPNP will
automatically propose the corresponding predefined frame formulation on the basis of the
category and formulation name selected by the responsible person. This predefined
frame formulation will be linked to the notification as a PDF document. This PDF
document can be opened by the responsible person in order to check its relevance for the
.
product being notified by clicking on
34
Important notice
A notification via predefined frame formulation can be done only if the
composition of the cosmetic product completely falls within the
concentration ranges mentioned in this frame formulation.
In particular, if any ingredient concentration is higher than the maximum levels indicated
in the predefined frame formulation, or if any ingredient is not covered by the predefined
frame formulation content, this predefined frame formulation must not be used for the
notification.
Specific information for Poison Centres regarding hair colouring
products
90% of total hair color market consists of permanent hair coloring products based on
oxidative dyes.
Permanent hair coloring products are typically two component products which are mixed
by the consumer immediately before application to the hair; they are typically left on the
hair for 30minutes before rinsing and drying of the hair.
− Component 1 is usually labelled “color cream” or “color gel” and is usually an off-white
or yellow-orange cream or liquid containing the oxidative dyes and the alkali (ammonia
or mono-ethanolamine).
− Component 2 is usually labelled developer cream or lotion and is a white liquid
containing the oxidant (hydrogen peroxide).
Oxidative dyes themselves are small colorless molecules which diffuse into the hair
together with hydrogen peroxide whereupon they start to couple with each other to form
larger colored molecules inside of the hair (see SCCS opinion on reaction products in
oxidative products 1311/10)
Oxidative dyes can be split into two groups:
− Primary Intermediates or Precursors such as p-phenylenediamines and paminophenols.
− Couplers or Color Modifiers such as resorcinols and m-aminophenols.
The types of precursors and couplers found in commercial products in the EU are
relatively limited.
35
− There are three classes of Oxidative Primary intemediates. By far the most commonly
used are the p-phenylenediamines (e.g. p-phenylenediamine, p-toluenediamine) and
p-aminophenols.
− There are five classes of Oxidative Couplers. The most commonly used are
resorcinols, m-aminophenols and m-phenylenediamines
Concentrations in precursors and couplers vary depending on the shades and the way
they are formulated. It is worth mentioning that concentrations are often restricted and the
maximum level allowed are available in the annexes of the Directive (or via the CosIng
database).
Some permanent hair coloring products combine oxidative dyes with a limited number of
direct dyes. The direct dyes are small phenylenediamines and phenols substituted with a
nitro group (see examples below)
Depending on the product categories, the physical form and the formulation name
selected, additional information will be asked by the CPNP on specific ingredients of
concern and/or the pH value of the product. The rules that the CPNP applies have been
elaborated by an expert group composed of representatives from poison centres,
competent authorities, industry trade associations and Commission’ services and are
available for consultation in the Annex I to this User Manual.
The following first question will be asked:
36
Please carefully go through the whole list of ingredients by clicking on the
symbols.
The responsible person has either to click on 'Yes, see below', check the box of the
relevant ingredient(s) and indicate its (their) concentration(s) in the product, or to click on
'No'.
For the other questions, the responsible person will usually have two choices, i.e. to
answer the question in the dedicated fields or answer 'not applicable'.
To facilitate the entry of names of ingredients, a link is made to CosIng to retrieve the
information. The responsible person can also type an ingredient name if the name is not
included in CosIng.
Important notice
'Not applicable' means in the case of ethanol and/or isopropanol that these
ingredients are not present in the product!
'Not applicable' means in the case of all other ingredient of concern that the
ingredient is either not present in the product, or is present in the product
but under the concentration of concern (according to the rules set out in the
Annex I to this User Manual).
All ingredient names shall be expressed using INCI names, when available.
Where the information on pH is required and the pH could not be measured in the product
directly, but through an aqueous solution, extract or dispersion (e.g. for solid
formulations), the user should mention this in the field dedicated to "Any other information
of significance for poison centres" using the expression "pH (aqueous
extract/solution/dispersion)" in English only.
37
All ingredient quantities shall be expressed using % w/w. The symbol % w/w shall
not be indicated in the answering field.
The CPNP applies the English notation for numbers
Example: 0.3 and not 0,3
For ethanol and/or isopropanol, an updated notification is required when
the content of either ingredient or the sum of both ingredients changes
by more than 5, if the value declared previously is <30%, or by more than 10, if
the value declared previously is ≥ 30%
For all other ingredients of concern, an updated notification is required
when the concentration of the ingredient changes by more than 20% of the
value previously declared (see Annex I to this User Manual for further details).
An updated notification is also required when the product does not fall
anymore in the predefined frame formulation, when a new ingredient of
concern enters in the composition of the product or when an ingredient of
concern no longer enters the composition of the product.
II.2.2.2.5.2 Exact concentration declaration
If the responsible person selects 'Exact concentration', the CPNP will ask whether he
wants to upload a file for the qualitative and quantitative composition.
1/ If the responsible person answers 'yes', he is asked to attach the corresponding file.
Only PDF format is allowed.
38
Important notice
No hand-written document is allowed.
Only clear and legible electronic PDF text format documents are allowed.
In order to facilitate poison centres reading in emergency situations, it is recommended
that the exact concentration document starts by mentioning the ingredients of
concerns and their concentration (according to the rules set out in Annex I to this
User Manual) and then lists all other ingredients by decreasing order of
their concentration in the product.
All ingredient names shall be expressed using INCI names, when available.
All ingredient quantities shall be expressed using % w/w. The symbol % w/w shall
not be indicated in the answering field.
The CPNP applies the English notation for numbers
Example: 0.3 and not 0,3
Where the information on pH is required and the pH could not be measured in the product
directly, but through an aqueous solution, extract or dispersion (e.g. for solid
formulations), the user should mention this in the field dedicated to "Any other information
of significance for poison centres" using the expression "pH (aqueous
extract/solution/dispersion)" in English only.
For ethanol and/or isopropanol, an updated notification is required when
the content of either ingredient or the sum of both ingredients changes
by more than 5, if the value declared previously is <30%, or by more than 10, if
the value declared previously is ≥ 30%
For the other ingredients, an updated notification is required when the
concentration of an ingredient changes by more than 20% of the value
declared previously, when a new ingredient enters in the composition of the product
or when an ingredient no longer enters the composition of the product.
2/ If the responsible person answers 'no', it is asked to enter the ingredients one by one.
To facilitate the entry of names of ingredients, a link is made to CosIng to retrieve the
information. The responsible person can also type an ingredient if its name is not included
in CosIng.
39
Here too, it is recommended that the responsible person starts by mentioning the
ingredients of concern, and their concentration (according to the rules set out in Annex I
to this User Manual) and then lists all other ingredients by decreasing order of
concentration in the product.
The responsible person should also mention in the dedicated field any other information
on the product that would be of significance for poison centres (using English only).
Depending on the product categories and formulation name selected, additional
information may be asked by the CPNP on the pH value.
II.2.2.2.5.3 Concentration ranges declaration
If the responsible person selects 'Concentration ranges', the CPNP will ask whether
he wants to upload a file for the qualitative and quantitative composition.
1/ If the responsible person answers 'yes', it is asked to attach the corresponding file.
Only PDF format is allowed.
Important notice
No hand-written document is allowed.
Only clear and legible electronic PDF text format documents are allowed.
For ingredients that are not of special concern only the following concentration
ranges are allowed:
40
[0% - 0.1%]
]0.1% - 1%]
]1% - 5%]
]5% - 10%]
]10% - 25%]
]25% - 50%]
]50% - 75%]
]75% - 100%]
In order to facilitate poison centres reading in emergency situations it is recommended
that the concentration ranges document starts by mentioning the ingredients of
concerns and their exact concentration (according to the rules set out in the
annex to this User Manual) and then lists all other ingredients by decreasing
order of their concentration range in the product.
Where the information on pH is required and the pH could not be measured in the product
directly, but through an aqueous solution, extract or dispersion (e.g. for solid
formulations), the user should mention this in the field dedicated to "Any other information
of significance for poison centres" using the expression "pH (aqueous
extract/solution/dispersion)" in English only.
For ethanol and/or isopropanol, an updated notification is required when
the content of either ingredient or the sum of both ingredients changes
by more than 5, if the value declared previously is <30%, or by more than 10, if
the value declared previously is ≥ 30%
For all other ingredients of concern, an updated notification is required
when the concentration of an ingredient changes by more than 20% of the
value previously declared (see Annex I to this User Manual for further details).
An updated notification is also required when an ingredient falls in a
concentration range different from the one previously declared, when
a new ingredient of concern enters in the composition of the product or when an
ingredient of concern no longer enters the composition of the product.
As for predefined frame formulations, depending on the product categories, the physical
form and the formulation name selected, additional information will be asked by the CPNP
on specific ingredients of concern and/or the pH value of the product. The rules that the
CPNP applies have been elaborated by an expert group composed of representatives
41
from poison centres, competent authorities, industry trade associations and Commission’
services and are available for consultation in the Annex I to this User Manual.
The following first question will be asked:
!! Please carefully go through the whole list of ingredients by clicking on the
symbols.
The responsible person has either to click on 'Yes, see below', check the box of the
relevant ingredient(s) and indicate its (their) concentration(s) in the product, on 'Yes, see
attachment' if the answer is provided in the attachment or on 'No' if the product contains
none of the ingredients listed.
For the other questions, the responsible person will usually have three options, i.e. to
answer the question in the dedicated fields, answer 'not applicable' or answer 'see
attachment'.
Important notice
'Not applicable' means in the case of ethanol and/or isopropanol that these
ingredients are not present in the product!
'Not applicable' means in the case of all other ingredients of concern that the
ingredient is either not present in the product, or is present in the product
but under the concentration of concern (according to the rules set out in the
Annex I to this User Manual).
'See attachment' can be used to answer a specific question only when the
information requested on the ingredient of concern is provided in the
qualitative and quantitative composition document attached.
All ingredient names shall be expressed using INCI names, when available.
The quantities of all the ingredients of concerns shall be expressed using % w/w. The
symbol % w/w shall not be indicated in the answering field
42
The CPNP applies the English notation for numbers
Example: 0.3 and not 0,3
2/ If the responsible person answers 'no', it is asked to enter the ingredients and the
corresponding concentration ranges one by one by decreasing order of concentration in
the product. To facilitate the entry of names of ingredients, a link is made to CosIng to
retrieve the information. The responsible person can also type an ingredient if the name is
not included in CosIng.
The responsible person should also mention in the dedicated field any other information
on the product that would be of significance for poison centres (using English only).
II.2.2.3 Section Original labelling & original packaging
In this section, the responsible person has to attach the original labelling and a
photograph of the original packaging (where reasonably legible). Only PDF, JPG or
JPEG format are accepted.
'Original' means the one corresponding to the first placing on the market in the EU.
The submission of the original labelling and of a photograph of the original packaging
(where reasonably legible) is mandatory at the latest when the product is placed on the
market.
43
Various situations may occur:
Example 1: a single component product without any secondary packaging (e.g. a
standalone bottle of shampoo)
→ The original labelling of the bottle and, if reasonably legible, the photograph of the
bottle shall be submitted.
Example 2: a single component product with a secondary packaging (e.g. a bottle of
shampoo in a box)
→ The original labelling of the box (outer packaging) and, if reasonably legible,
the photograph of the box shall be submitted.
→ Optionally, the original labelling and the photograph of the bottle can also be
submitted.
Example 3: a multi-component product (e.g. a set composed of three bottles)
→ The original labelling of the set and, if reasonably legible, the photograph of the set
shall be submitted.
→ Optionally, the original labelling of each bottle and the photograph of each bottle can
also be added to the notification at the component level.
Important notice
The labelling shall include any text, symbols, pictures etc (e.g. art work). It
shall cover notably all the mandatory elements mentioned in Article 19 of Regulation (EC)
N°1223/2009. In cases where, in accordance with Article 19(2), some
mandatory information is mentioned on an enclosed or attached leaflet, label, tag or card,
this leaflet, label, tag or card shall also be included in the notification.
If the notification covers several pack sizes or shades, the most legible original labelling &
original packaging are to be attached to the notification, usually the biggest pack size.
44
To add an image of the original labelling or a photograph of the original packaging the
responsible person has to click on
.
A pop up will appear where the documents can be uploaded.
The responsible person has then to click on
to attach the document to the
notification or on
The
button gives the possibility to add more than one document.
The responsible person can view the documents it has attached by clicking the view
button
or delete them by clicking in the delete button
Important notice
The size of all attached documents (labelling, photograph of the packaging, composition
document) cannot exceed 2 MB.
45
Important notice
The labelling can also be submitted by using the free text box. This is however limited to
the very specific cases where the labelling is exclusively composed of text.
46
II.3 NOTIFICATIONS PURSUANT TO ARTICLE 13(1) and (2) - MULTICOMPONENT PRODUCT
A notification that relates to products composed of several components (e.g. hair dye sets, makeup sets) that are not marketed separately will be different from that of a single component product.
Note: Sets do not need to be notified as multi-component products provided that all components
that compose this set have been notified individually.
To create a notification for a multi-component product the responsible person has to click on
‘Notify a multi-component product' in the ‘Products’ tab.
The general form for the notification of that multi-component product will be displayed.
Three different tabs are available, one titled ‘General information’ and two titled ‘Component’:
The ‘General information’ tab allows the responsible person to enter some general information
about the product (e.g. kit, set, etc) (see section II.2.1 for further details).
Additional question on pH will be asked by the CPNP. In particular, the CPNP will ask if the
components of the products are intended to be mixed.
If the responsible person answers 'yes' the CPNP will ask if the produc is a hair dye.
If the responsible person answers 'No' the CPNP will ask if the pH is lower than 3 or higher than
10.
47
If the responible person answers 'Yes' the CPNP will ask to indicte the pH range. The pH range
cannot exceed 1 pH unit.
If the responsible person indicates that the product is a hair dye, the CPNP will directly ask the pH
range. The pH range cannot exceed 1 pH unit.
The 'Component' tabs will allow the responsible person to enter the information on each of the
components separately (see section II.2.2 for further details).
Important notice
The component name is a crucial element of the notification as it might be used by
competent authorities or by poison centres to search for a specific component in the database.
The component name must be detailed enough to enable its specific identification.
Only in cases where the component has no name (e.g. certain make-up set components) the
component name shall be understood as the description of the component that enables its specific
identification.
By default two component tabs are displayed, but additional component tab(s) can be added to
the notification by clicking on
.
The user can:
48
: The notification is saved as draft but not notified.
A notification can be saved as draft without all the required fields being filled. To save a
notification as draft, at least a product/component name and the corresponding language must be
filled (indicated by a "**").
: The notification is complete and will be made available to poison centres and
competent authorities. It will then be not possible to delete this notification from the system. Only
update or correction will be possible.
A notification can be notified only when all mandatory fields indicated by a "*" are filled in.
If some mandatory information is missing, the system will not accept the notification and will
display a warning message indicating how many fields are missing. The system will indicate the
tab(s) where the information is missing and will show the message 'this field is required' next to
the field(s) that still needs to be filled in.
: The ongoing operation is aborted.
49
II.4 NOTIFICATIONS PURSUANT ARTICLE 13(3) - DISTRIBUTION
A distributor who makes available in a Member State a cosmetic product already marketed in
another Member State and translates, on his own initiative, any element of the labelling of that
product in order to comply with national law must notify some information in the CPNP.
To enter a distribution notification the distributor has to select 'notify a product' in the
'Distributors' tab.
Step 1 - The CPNP will first ask the distributor to provide the name of the responsible person of
the product that the distibutor wants to distribute.
Step 2 - On the basis of the information entered by the distributor, the CPNP will display a limited
list of result of matching responsible person names.
The distributor has to select one of the proposed results. The system will then display (in readonly mode) the address associated to this responsible person.
Step 3 - The CPNP will then ask the distributor to enter the product name in the Member State of
dispatch.
On the basis of the information entered by the distributor, the CPNP will display a limited list of
result of product names matching.
The distributor has to select one of the proposed results.
Step 4 - The CPNP will display (in read only mode) the category of the cosmetic product
associated to this product in the CPNP.
Step 5 - The CPNP will ask the distributor to select in the drop down menu the Member State in
which he makes the product available.
50
The distributor has to enter the product name in the Member States in which the distibutor makes
the product available and to select the corresponding language in the drop down menu.
Step 6 – If the product is a multi-component product, the distributor has to enter the component
name in the Member States in which the distributor makes the product available and to select the
corresponding language in the drop down menu.
Three buttons are available at the bottom right of the screen.
If the distributor wants to save the notification as draft, the distributor has to click on
.
If the distributor wants to abort the ongoing operation, the distributor has to click on
.
When the information on the distribution notification is complete the distributor can click on
. The information will be made available to competent authorities and poison centres. It
will be linked to the original notification of the product being distributed. It will then be not possible
to delete this notification from the system. Only update will be possible.
II.5 SEARCH TOOLS
II.5.1 Simple search
The 'Simple search' is intended for the responsible persons, the competent authorities and the
poison centres.
It allows these users to quickly search for a notification in the database, using key words. To
reduce the amount of data returned at least three characters must be entered.
51
The data that is accessible though the simple search depends on the user profile:
- A responsible person can search only for the notifications it (or users acting on its behalf) has
entered into the system. A responsible person that has given access to several users to act on his
behalf can see all notifications entered by these users. A responsible person can search for draft
and submitted notifications.
- Competent authorities and poison centres can search for all submitted notifications contained in
the system. Draft notifications are not accessible to competent authorities and poison centres.
The 'Simple search' searches on product name, component name, responsible person name,
distributor name (for competent authorities and poison centres only), category (level 3),
formulation name (for responsible person and poison centres only) and CPNP reference.
As shown above, the keyword(s) used for the simple search will be highlighted in the list of results.
II.5.2 Advanced search
The 'Advanced search' is intended for the responsible persons, the competent authorities and
the poison centres.
It allows these users to search a product into the CPNP using cumulative search criteria.
The advanced search criteria are spread over two different tabs.
52
The
criteria about the product:
tab allows the users to search on the following general information
The tab
allows the users to search on the following criteria related to
the category and the formulation of the product.
53
At the bottom right of the screen the buttons
and
allow either to reset the
search criteria or to launch the search based on the criteria that have been filled in.
There are two icons at the top right of the results screen
results list in a PDF or XLS format.
and
. They allow exporting the
II.5.3 Distribution search
The 'Distribution search' is intended for the distributors only.
It allows a distributor to search for its notifications.
This search tool allows the distributor to search on the product name in the Member State where
the distributor has made the product available, on the Member State where the product was made
available by the distributor and on the status of the notification (i.e. draft or notified).
54
The two following buttons are available at the bottom right of the screen.
to reset the search criteria.
to launch the search.
II.5.4 Responsible person search
The 'Responsible person search' is intended for the competent authorities and poison
centres only.
It allows these users to search for a responsible person in the CPNP, by its name, the postal code
or the country of its address. It then allows for the consultation of all notifications of this
responsible person.
II.6 VIEW, EDIT or DUPLICATE NOTIFICATIONS PURSUANT ARTICLE 13(1)
and (2)
Once a simple search or an advanced search has been performed, the CPNP will display the list
of results.
55
To shorten the list of results the 'Search' filter tool can be used on the top right of the results list.
A possibility to see more results on the same page is available by using the drop down menu and
selecting 'Show 10 – 25 – 50 or 100 entries' on one page.
II.6.1 - View product
The accessible information depends on the user profile:
The responsible person and the poison centres can see all the information contained in the
notification.
The competent authorities do not have access to information related to the formulation name,
frame formulation number and qualitative and quantitative composition information, except the
information concerning the presence of CMR substances of category 1A or 1B and of substances
in the form of nanomaterials.
may appear in the column 'product name' for some notifications. It
In the results list, the symbol
means that the original labelling (and the photograph of the packaging, if reasonably legible) of the
product have not yet been notified and indicates therefore that the product is not yet placed on the
market.
After having clicked on
a header is available for consultation:
The header allows the direct consultation of some important information on the product:
- the product name;
- the product name in the interface language;
- the responsible person name;
- the CPNP reference i.e. the reference given by the CPNP to the product;
- the current version number (indicating the formula version, not the dataset version, see below);
- the date of the first notification;
56
- the access to the previous versions.
II.6.1.1 Single-component products
The 'General information' tab displays some general information on the product, e.g.:
- the CPNP reference;
- the industry reference (only for industry's internal use);
- the version of the notification;
- the last modification date and time stamp;
- the product name(s), shades (if applicable) and corresponding language(s), given by the
responsible person and by the distributors;
- the information on whether the product is specifically intended for children under 3 years of
age;
- the responsible person details (at least name and address);
- the contact person details;
- the information on whether the product is ready to go on the market or already on the
market;
- if the product imported in the Community (and if so, the country of origin);
- the Member State of first placing on the market.
The 'Product details' tab displays information on:
- the category of the product;
- the physical form of the product;
- the special applicator or packaging (if applicable);
- information on the pH of the product (if applicable);
- the notification type (i.e. predefined frame formulations, exact concentrations or concentration
ranges);
- the information on ingredients of concern contained in the product (name and quantity %
w/w).
Note: Where 'not applicable' is indicated, the meaning is indicated in the right column, i.e. either
it means that the ingredient is 'not present' in the product (in this case 0% w/w is indicated) or is
present in the product but under the concentration of concern (in this case the concentration of
concern is indicated);
- the formulation name (and formulation number in case of predefined frame formulation);
57
- an hyperlink to the composition of the product (predefined frame formulation, exact composition
or composition with ranges);
- information on CMR substances of category 1A or 1B present in the product;
- information on substances in the form of nanomaterials present in the product;
- any other information of significance for poison centres;
);
- the original packaging of the product (accessible by clicking on
- the original labelling of the product (accessible by clicking on
- the original labeling of the product (text only).
);
The 'Previous version(s)' tab indicates into brackets the number of versions and displays
information on these different versions of the notification (period of validity, type of change (update
or correction) and reason for change (see section II.6.2).
The 'Distributed' tab is only available to competent authorities and poison centres. This tab
shows the contact details of the distributors.
At the bottom right up to four buttons may appear
The button
allows the user to create a PDF document for the notification.
The button
allows the user to export the notification, using XML files.
The button
is only available for responsible persons. It allows the responsible person to
edit its notification.
The button
allows the user to go back to the search screen.
II.6.1.2 Multi-component products
For the multi-component products the tabs available are slightly different.
The 'General information' tab displays some general information on the product, e.g.:
- the CPNP reference i.e. the reference given by the CPNP to the product;
- the industry reference i.e. the reference given by the industry to the product (only for industry
internal use);
- the version of the notification;
58
- the last modification date and time stamp;
- the product name(s), shades (if applicable) and corresponding language(s), given by the
responsible person and by the distributors;
- the information on whether the product is specifically intended for children under 3 years of
age;
- the responsible person details (at least name and address);
- the contact person details;
- the information on whether the product is ready to go on the market or already on the
market;
- if the product imported in the Community (and if yes, the country of origin);
- the Member State of first placing on the market;
- the pH of the mixed product (if appropriate)
- the original packaging of the product (accessible by clicking on
);
- the original labelling of the product (accessible by clicking on
- the original labeling of the product (text only)
);
Each 'Component' tab(s) display(s) information on:
- the component name(s), shades (if applicable) and corresponding language(s), given by
the responsible person and by the distributors, if any;
- the category of the component;
- the physical form of the component;
- the special applicator or packaging (if applicable);
- the notification type (i.e. predefined frame formulations, exact concentrations or concentration
ranges);
- the information on ingredients of concern contained in the component (name and quantity %
w/w).
Note: Where 'not applicable' is indicated, the meaning is indicated in the right column, i.e. either
it means that the ingredient is 'not present' in the product (in this case 0% w/w is indicated) or is
present in the product but under the concentration of concern (in this case the concentration of
concern is indicated);
- an hyperlink to the composition of the component (predefined frame formulation, exact
composition or composition with ranges);
- the formulation name of the component;
- information on CMR substances of category 1A or 1B present in the component;
- information on substances in the form of nanomaterials present in the component;
- other information of significance por poison centres;
- optionally, the original packaging of the component(accessible by clicking on
- optionally, the original labelling of the component (accessible by clicking on
- optionally, the original labeling of the component (text only)
59
);
);
The 'Previous version(s)' tab indicates into brackets the number of versions and displays
information on these different versions of the notification (dates of validity, type of change (update
or correction) and reason for change (see section II.6.2).
The 'Distributed' tab is only available to competent authorities and poison centres. This tab
shows the contact details of the distributors.
At the bottom right up to four buttons may appear
The button
allows the user to create a PDF document for the notification.
The button
allows the user to export the notification, using XML files.
is only available for responsible persons. It allows the responsible person to
The button
edit its notification.
The button
allows the user to go back to the search screen.
II.6.2 - Edit product
The 'Edit product' function is only available for the responsible person. It allows the
responsible person to edit a notification it has previously entered in the system.
Important Notice
Where any of the information set out in paragraphs 1, 3 and 4 of Article 13 of Regulation
1223/2009 changes, the responsible person or the distributor shall update its notification without
delay.
Once the change(s) made, the system will ask the responsible person for the modification type
(update or correction) and the modified items.
Important Notice
It is important to make a clear distinction between an update and a correction. It is particularly
important to make this distinction when it concerns the formulation.
An ‘update’ of the formulation means a change of previously valid information. The original data
are related to the older product formulation while the updated dataset relates to the new
60
formulation. Poisons centre must evaluate both formulations in case they cannot reliably decide
which formulation version is involved in an exposure case.
A ‘correction’ of the formulation means change of erroneous or incomplete product information
without changing the (real world) formula. Poisons centre need only evaluate the corrected
dataset.
The responsible person has the possibility to add a comment (using English only) in the free text
box should it wish to provide further details on the modification.
to notify
Once the information has been entered, the responsible person has to click on
the change in the system. This change will be made available to competent authorities and poison
centres.
Important notice
Only an update (not a correction) of the formulation and/or category will create a new version of
the notification. All other changes will result into a new time stamp of the same version of the
notification.
Should the responsible persons want to cancel the modification it has to click on
II.6.3 - Duplicate a product
61
.
This function allows the responsible person to duplicate an existing notification.
This is a useful function when very similar products have to be notified separately since it avoids
retyping all identical information.
The system duplicates all data except the answers to ingredient of concern specific questions,
attached labelling (and packaging where appropriate) and the checkbox 'Product ready to go on
the market or already on the market'.
II.7 VIEW AND EDIT NOTIFICATIONS PURSUANT ARTICLE 13(3)
Once a search for notifications pursuant Article 13(3) has been performed, the following screen
will be displayed:
If the distributor wants to update or correct one of the displayed notifications, he has to click on
.
The CPNP will then display the notification screen and the distributor can update or correct the
information that was submitted.
Two buttons are available,
operation.
to notify the change / correction or
62
to cancel the
ANNEX I: Rules on specific ingredients of concern and/or the pH
value
Rule 1
Ethanol and/or isopropanol
The percentage weights (w/w) of ethanol and/or isopropanol must be specified for all
products.
An updated notification is required when the content of either ingredient or the sum of both
ingredients changes by more than:
- 5 if the value declared previously is < 30%
Examples: A change from 20% of ethanol to 26% ethanol constitutes a change of 6 in the
ethanol content in the formulation and therefore requires an updated notification.
A change from 20% of ethanol and 20% isopropanol to 23 % of ethanol and 24 % of
isopropanol constitutes a change of 7 of the sum of ethanol and isopropanol in the formulation
and therefore requires an updated notification.
- 10 if the value declared previously is ≥ 30%
If ethanol or isopropanol are not present in the cosmetic product, then 'not applicable' must be
checked.
Note: declarations of percentage weights may be rounded to the nearest whole number.
Note: if the percentage weight is below 1%, it can be specified as 1%.
Rule 2
Antidandruff products
The INCI name and the concentration of the antidandruff agent(s) must be specified.
An updated notification is required when the concentration of the antidandruff agent changes by
more than 20% of the value declared previously.
Rule 3
Anti-hair loss products
The INCI name and the concentration of the anti-hair loss agent(s) must be specified.
An updated notification is required when the concentration of the anti-hair loss agent changes by
more than 20% of the value declared previously.
Rule 4
Skin lightening products containing anti-pigmenting and/or
depigmenting agent(s)
63
The INCI name and the concentration of anti-pigmenting and depigmenting agent(s) must
be specified.
An updated notification is required when the concentration of at least one agent changes by more
than 20% of the value declared previously.
If anti-pigmenting and depigmenting agent(s) are not present in the cosmetic product, then 'not
applicable' must be checked.
Rule 5
Chemical exfoliation products containing chemical exfoliating
agent(s) (e.g. lactic acid, glycolic acid, salicylic acid)
The INCI name and the concentration of chemical exfoliating agent(s) must be specified.
An updated notification is required when the concentration changes by more than 20% of the
value declared previously.
Rule 6
Products containing vitamin A and derivatives (e.g. retinol, retinyl
esters)
The exact content of vitamin A or any of its derivatives must be specified if the level
exceeds 0.20 % (calculated as retinol) or if the amount exceeds 0.09 grams (calculated as
retinol) for the whole product.
An updated notification is required when the concentration of vitamin A or derivatives changes by
more than 20% of the value declared previously.
If the level of vitamin A or any of its derivatives does not exceed 0.20% (calculated as retinol) or if
the amount does not exceed 0.09 grams (calculated as retinol) or if vitamin A or any of its
derivatives are not present in the product, then 'not applicable' must be checked.
Rule 7
Products containing xanthine derivatives (e.g. caffeine,
theophylline, theobromine, plant extracts containing xanthine
derivatives e.g. Paulinia cupana (guarana) extracts/powders)
Should a product contain more than 0.5% xanthine derivatives, the INCI name and the
concentration of the derivative(s) must be specified.
An updated notification is required when the concentration changes by more than 20% of
the value declared previously.
If xanthine derivatives are not present or present below 0.5% in the cosmetic product, then 'not
applicable' must be checked.
Rule 8
Products containing cationic surfactants with two or more chain
lengths below C12
64
The INCI name and the concentration of cationic surfactants with two or more chain
lengths below C12 must be specified if the surfactant is used for non preservative purpose.
An updated notification is required when the concentration changes by more than 20% of the
value declared previously.
Typical examples for cationic surfactants covered by this rule:
•
•
•
•
behentrimonium chloride
distearyldimonium chloride
cetrimonium chloride
dicetyldimonium chloride
If cationic surfactants with two or more chain lengths below C12 are not present in the product,
then 'not applicable' must be checked.
Rule 9
Products containing propellants
The INCI name and the concentration of each propellant must be specified.
An updated notification is required when either of these concentrations changes by more than
20% of the value declared previously.
If propellants are not present in the product, then 'not applicable' must be checked.
This rule concerns aerosol spray products and any other product which are presented in aerosol
spray.
Rule 10
Products containing or releasing hydrogen peroxide
The concentration of hydrogen peroxide and/or the INCI name and concentration of the
compounds releasing hydrogen peroxide must be specified.
An updated notification is required when the concentration changes by more than 20% of the
value declared previously.
If hydrogen peroxide and compounds releasing hydrogen peroxide are not present in the product,
then 'not applicable' must be checked.
This rule concerns hair colorant products, hair bleach products, permanent wave products, and
hair straighteners.
Rule 11
Products containing reducing agents
The INCI name and the concentration of each reducing agent must be specified.
An updated notification is required when either of these concentrations changes by more than
20% of the value declared previously.
This rule concerns depilatories, hair dyes, dye removers and permanent wave products.
65
Examples for reducing agents typically used are:
•
•
•
•
•
•
•
•
•
thioglycerin,
thioglycolic acid and its salts (ammonium thioglycolate, ethanolamine thioglycolate)
ammonium thiolactate
cysteine HCl
sodium sulfite
sodium metabisulfite
sodium hydroxymethane sulfonate
sodium hydrosulfite
alkaline and earth alkaline sulphides
If reducing agent(s) are not present in the product, then 'not applicable' must be checked.
Rule 12
Products containing persulfates
The INCI name and the concentration of each persulfate must be specified.
An updated notification is required when either of these concentrations changes by more than
20% of the value declared previously.
If persulfate(s) are not present in the product, then 'not applicable' must be checked.
Rule 13
Products containing hair straightening agents
The INCI name and the concentration of straightening agents must be specified.
An updated notification is required when either of these concentrations changes by more than
20% of the value declared previously.
Examples for straightening agents typically used are:
•
•
•
•
•
o
o
o
o
sodium hydroxide, potassium hydroxide, lithium hydroxide
potassium citrate
calcium hydroxide
guanidine carbonate
reducing agents :
ammonium thioglycolate
ammonium thiolactate
cysteine HCl
ethanolamine thioglycolate
Rule 14
Bath salts/cubes containing inorganic sodium salts
The total concentration of sodium salts must be specified.
An updated notification is required when the total concentration of inorganic sodium salts changes
by more than 20% of the value declared previously.
66
Rule 15
Toothpastes and Mouthwashes containing Fluoride compounds
The concentration of fluoride compounds (calculated as Fluorine), must be specified.
An updated notification is required when the fluorine concentration changes by more than 20% of
the value declared previously.
If fluoride compounds are not present in the product, then 'not applicable' must be checked.
Rule 16
Products with a pH lower than 3 or higher than 10, and pH of hair
coloring products
¾
The pH of single-component products or individual component (except for hair dyes)
must be specified in the pH field if it is lower than 3 or higher than 10.
¾
In the case of multiple component products (except for hair dyes) that are mixed prior
to use, the pH of the mixed product must be specified in the respective pH field if it is lower than 3
or higher than 10.
It is acknowledged that different mixing ratios of components (e.g. to achieve different
strengths) can lead to pH variations. In case the exact pH cannot be determined for the mixed
product then the pH can be expressed in range form of no more than one unit (e.g. 9.5 – 10.5).
¾
For the case of single-component or multi-component hair dyes, the pH must always
be indicated, even if it is within the range of pH 3 to pH 10.
However given pH variations between color shades of the same product, the indication of
an exact pH may not be relevant. For these products, the pH of the components and the mixed
products can be expressed in range form of no more than one unit (e.g. 8.5 – 9.5)
In all cases above, an updated notification is required when the pH declared previously changes
by more than 0.5.
For any product or component with a pH higher than 10, the INCI name and concentration
of each alkaline agent, and – if applicable – ammonium hydroxide liberator must be
specified.
An updated notification is required when either of these concentrations changes by more than
20% of the value declared previously
Examples for alkaline agents typically used are:
•
•
•
•
•
sodium / potassium hydroxide
sodium / potassium carbonate
sodium/potassium metasilicate
calcium oxide
ammonium hydroxide
67
•
ethanolamine
A typical ammonium hydroxide liberator is
•
ammonium chloride
Rule 17
Products containing essential oils, camphor, menthol or eucalyptol
Except for perfume and some limited other product categories, when a manufacturer
introduces in a formula essential oils, camphor, menthol or eucalyptol with a total level
higher than 0.5%, the total level concentration must be indicated.
If essential oils, camphor, menthol or eucalyptol are not present in the product or if the level of
essential oils, camphor, menthol or eucalyptol does not exceed 0.5%, then 'not applicable' must
be checked.
For each individual essential oil, camphor, menthol or eucalyptol with a level higher than
0.5% (0.15 % in case of camphor), the manufacturer must state the name and quantity of
this essential oil/essential oil derivative.
If no individual essential oil, camphor, menthol or eucalyptol are present with a level higher
than 0.5% (0.15 % in case of camphor), then 'not applicable' must be checked.
An updated notification is required when the concentration changes by more than 20% of
the value declared previously.
Rule 18
Other Ingredients
In addition to the rules above, a number of substances have been identified by European Poison
Control Centres as posing a particular concern with regard to an acute poisoning emergency.
The concentration, above the indicated threshold, of any of these ingredients in a
formulation must be specified. If no threshold is indicated, the concentration must always
be specified.
An updated notification is required when the concentration changes by more than 20% of the
value declared previously:
Glycols and Glycol ethers
BUTETH-2 ACETATE (above 1%)
BUTOXYDIGLYCOL (above 1%)
BUTOXYETHANOL (above 1%)
BUTOXYETHYL ACETATE (above 1%)
DIETHOXYDIGLYCOL (above 1%)
DIPROPYLENE GLYCOL (above 10%)
DIPROPYLENE GLYCOL DIMETHYL ETHER (above 10%)
DIPROPYLENE GLYCOL ISOBORNYL ETHER (above 10%)
68
ETHOXYDIGLYCOL (above 1%)
ETHOXYDIGLYCOL ACETATE (above 1%)
GLYCOL (above 1%)
GLYCOL ETHERS (not polymers) (above 1%)
METHOXYISOPROPANOL (above 10%)
METHOXYISOPROPYL ACETATE (above 10%)
PPG-2 METHYL ETHER (above 10%)
PPG-2 METHYL ETHER ACETATE (above 10%)
PROPYLENE GLYCOL (above 10%)
PROPYLENE GLYCOL BUTYL ETHER (above 10%)
Hydrocarbons solvents
CYCLOHEXANE (above 5%)
HYDROGENATED DIDODECENE (above 5%)
ISOPENTANE (above 5%)
PENTANE (above 5%)
TOLUENE (above 5%)
TURPENTINE (above 5%)
Alcohols other than ethanol and isopropanol
BENZYL ALCOHOL (above 1%)
FURFURYL ALCOHOL (above 1%)
HEXYL ALCOHOL (above 5%)
N-BUTYL ALCOHOL (above 1%)
PROPYL ALCOHOL (above 1%)
T-BUTYL ALCOHOL (above 1%)
Others
ACETONE (above 5%)
BENZYL BENZOATE (above 1%)
BRUCINE SULFATE
BUTYL ACETATE (above 1%)
BUTYROLACTONE (above 0,1%)
BUTOXYETHYL ACETATE (above 1%)
CHLOROPLATINIC ACID (above 0,1%)
COPPER SULFATE (above 0,1%)
CYCLOHEXANONE (above 5%)
DIMETHYLTOLYLAMINE (above 0,1%)
ETHYL ACETATE (above 1%)
ETHYL ETHER (above 5%)
FORMALDEHYDE (above 0,2%)
HYDROXYLAMINE HCL; HYDROXYLAMINE SULFATE (above 1%)
M-CRESOL, O-CRESOL, P-CRESOL, MIXED CRESOLS (above 0,1%)
MEK (above 5%)
METHYL ACETATE (above 0,1%)
METHYL PYRROLIDONE (above 5%)
69
MIBK (above 5%)
POTASSIUM CHLORATE (above 0,1%)
SODIUM CHLORATE (above 0,1%)
TRIETHYL PHOSPHATE (above 0,1%)
The user should also notify in the dedicated field any other information on the product that would
be of significance for poison centres or similar bodies, where such centres or bodies have been
established by Member States (using English only).
Note : Frame formulations mentioning “AQUA” also cover products in which water is not added as
such as an ingredient but through carry-over from aqueous plant extracts, fruit juices, etc
70
ANNEX II: Frame formulations
1. SKIN CARE
SKIN CARE CREAM, LOTION, GEL
1.1
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF SILICONES
1.2
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF HUMECTANTS
1.3
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF BULKING AGENTS
1.4
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF FATTY COMPOUNDS
1.5
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF UV FILTERS
1.6
SKIN CARE CREAM, LOTION, GEL – WITH HIGH LEVEL OF PERFUME
1.7
ZINC OXIDE BASED CREAM
1.8
SKIN GEL (HYDRO-ALCOHOLIC BASED)
1.9
SKIN OIL
1.10
TONIC, COSMETIC WATER
1.12
CHEMICAL EXFOLIATION PRODUCTS
1.13
SKIN CARE (SILICONE BASED)
1.14
PETROLEUM JELLY
1.15
TALCUM POWDER (LOOSE OR PRESSED)
1.16
LIP CARE (STICK, CREAM, GEL)
1.17
2. SKIN CLEANSING
FOAMING SKIN CLEANSER1
2.1
FOAMING SKIN CLEANSER – WITH HIGH LEVEL OF OILS AND/OR HUMECTANT
2.2
71
MAKE-UP REMOVER - NON FOAMING CLEANSER (INCLUDING TWO-PHASE
PRODUCTS)
2.3
MAKE-UP REMOVER - NON FOAMING OIL CLEANSER
2.4
GENTLE CLEANSING GEL
2.5
SKIN CLEANSING CREAM, LOTION, SCRUB, GEL
2.6
BODY SCRUB (GEL, CREAM)
2.7
SOAP – TOILET
2.8
LIQUID SOAP
2.9
BATH AND SHOWER GEL, CREAM, MILK, PASTE
2.10
SLIGHTLY FOAMING SHOWER CREAM, MILK
2.11
BATH SALTS / CUBES
2.12
BATH AND SHOWER OIL (INCLUDING BATH BEADS)
2.13
FOOTBATH
2.14
3. HAIR REMOVAL
CHEMICAL DEPILATORY – CREAM, GEL
PHYSICAL DEPILATORY WAX – RESIN BASED
PHYSICAL DEPILATORY WAX – SUGAR BASED
3.1
3.2
3.3
4. BLEACH FOR BODY HAIR
BLEACH FOR BODY HAIR
4.1
5. CORRECTION OF BODY ODOUR AND/OR PERSPIRATION
ANTIPERSPIRANT AEROSOL SPRAY (WITH ANTIPERSPIRANT SALT)
72
5.1
DEODORANT AEROSOL SPRAY (WITHOUT ANTIPERSPIRANT SALT)
5.2
ANTIPERSPIRANT ROLL-ON (WITH ANTIPERSPIRANT SALT)
5.3
DEODORANT ROLL-ON (WITHOUT ANTIPERSPIRANT SALT)
5.4
ANTIPERSPIRANT STICK (WITH ANTIPERSPIRANT SALT)
5.5
DEODORANT STICK (WITHOUT ANTIPERSPIRANT SALT)
5.6
ANTIPERSPIRANT LIQUID SQUEEZE PACK OR PUMP SPRAY
5.7
DEODORANT LIQUID SQUEEZE PACK OR PUMP SPRAY
5.8
ANTIPERSPIRANT CREAM
5.9
6. SHAVING PRODUCTS
SHAVING CREAM
6.1
BRUSHLESS SHAVING CREAM
6.2
SHAVE GEL
6.3
SHAVING GEL (POST FOAMING)
6.4
SHAVING FOAM AEROSOL
6.5
SHAVING SOAP/STICK
6.6
AFTERSHAVE BALM
6.7
AFTERSHAVE LOTION
6.8
7. MAKE-UP
FOUNDATION AND BLUSHER (LIQUID, CREAM, FOAM)
7.1
FOUNDATION – ANHYDROUS
7.2
CONCEALER CREAM
7.3
CONCEALER STICK
7.4
73
FOUNDATION / CONCEALER (SOLID)
7.5
FACE POWDER
7.6
LIPSTICK / LIP CREAM (INCLUDING CONCEALER STICK/CREAM)
7.7
LIP COLOUR AND GLOSSER/BALM
7.8
LIP PENCIL
7.9
LIPSTICK SEALER / LIP COAT
7.10
LIP AND EYE FIX
7.11
EYE FIX – ANHYDROUS
7.12
LIP INK (PENCIL)
7.13
LIP INK (LIQUID)
7.14
EYE SHADOW, BLUSHER AND LINER (POWDER)
7.15
EYE SHADOW AND BLUSHER (CREAM)
7.16
EYE SHADOW AND BLUSHER – ANHYDROUS (CREAM, STICK, POWDER, …)
7.17
EYE PENCIL
7.18
EYE LINER - REGULAR (LIQUID, CREAM)
7.19
EYE LINER - WATERPROOF (LIQUID, CREAM, PASTE)
7.20
EYE LINER (CAKE)
7.21
MASCARA – REGULAR
7.22
MASCARA – WATERPROOF
7.23
MASCARA (CAKE)
7.24
BODY GLITTER
7.25
8. PERFUMES
PERFUME (EAU DE COLOGNE, EAU DE TOILETTE, EAU DE PARFUM, EXTRAIT DE
PARFUM, PARFUM)
8.1
PERFUMED POWDER (LOOSE OR PRESSED)
8.2
74
SOLID PERFUME (PASTE, WAXE, …)
8.3
PERFUMED SKIN OIL
8.4
9. SUN PRODUCTS AND SELF TANNING PRODUCTS
SUNSCREEN CREAM, LOTION
9.1
SUNSCREEN OIL
9.2
SUNSCREEN STICK
9.3
SUNSCREEN HYDROGEL
9.4
SUNSCREEN GEL (OIL BASED)
9.5
SELF TAN - LOTION, CREAM
9.6
SELF TAN - LOTION, GEL
9.7
10. HAIR AND SCALP CARE PRODUCTS
SHAMPOO – LIQUID, CREAM, PASTE
10.1
SOAP SHAMPOO
10.2
SHAMPOO PLUS CONDITIONER
10.3
HAIR CONDITIONER
10.4
HAIR CONDITIONER (SILICONE BASED)
10.5
HAIR / SCALP CARE LOTION
10.6
HAIR / SCALP BIPHASE LOTION
10.7
11. HAIR COLOURING PRODUCTS
HAIR COLORANT (TEMPORARY) – SHAMPOO
75
11.1
HAIR COLORANT (TEMPORARY) - FOAM, LOTION
11.2
HAIR COLORANT (TEMPORARY OR SEMI-PERMANENT) - LIQUID, CREAM, FOAM
11.3
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) – TYPE 1 : TWO
COMPONENTS – COLORANT PART
11.4
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) – TYPE 2 : TWO
COMPONENTS - COLORANT PART WITH HIGH LEVEL OF OILS
11.5
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) – TYPE 3 : THREE
COMPONENTS - COLORANT PART A
11.6
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) – TYPE 3 : THREE
COMPONENTS - COLORANT PART B
11.7
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) - TYPE 1 : TWO OR
THREE COMPONENTS - OXIDATIVE PART
11.8
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE) – TYPE 2 : TWO OR
THREE COMPONENTS - OXIDATIVE PART WITH HIGH LEVEL OF OILS
11.9
DYE REMOVER (REDUCING TYPE) - PART A
11.10
DYE REMOVER (REDUCING TYPE) - PART B
DYE REMOVER (OXIDATIVE TYPE) - PART A
DYE REMOVER (OXIDATIVE TYPE) - PART B
11.11
11.12
11.13
SKIN DYE-REMOVING CLEANSER (REDUCING TYPE)
11.14
HAIR BLEACH – POWDER
11.15
HAIR BLEACH – PASTE
11.16
HAIR BLEACH - OXIDATIVE PART - TYPE 1
11.17
HAIR BLEACH - OXIDATIVE PART - TYPE 2
11.18
HAIR BLEACH - ALKALINE PART
11.19
HAIR COLOUR RESTORER
11.20
12. HAIR STYLING PRODUCTS
HAIR STYLING CREAM / PASTE (GUM, POMADE, PASTE, WAXE, …)
12.1
HAIR SHINE WAX OR BRILLIANTINE
12.2
HAIR STYLING LOTION
12.3
76
SETTING LOTION (INCLUDING COLOURED SETTING LOTIONS)
12.4
HAIR SHINE / STYLING GEL
12.5
HAIR FOAM
12.6
HAIR SPRAY – AEROSOL
12.7
HAIR SPRAY - PUMP SPRAY
12.8
HAIR SHINE SPRAY – AEROSOL
12.9
PERMANENT WAVE LOTION - SINGLE COMPONENT - BASED ON REDUCING AGENTS
12.10
PERMANENT WAVE LOTION - TWO-COMPONENT – BASED ON HYDROGEN
PEROXIDE AND REDUCING AGENTS - PART A
12.13
PERMANENT WAVE LOTION - TWO-COMPONENT - BASED ON HYDROGEN PEROXIDE
AND REDUCING AGENTS - PART B
12.14
PERMANENT WAVE LOTION - TWO-COMPONENT - BASED ON REDUCING AGENTS PART A
12.15
PERMANENT WAVE LOTION - TWO-COMPONENT - BASED ON REDUCING AGENTS PART B
12.16
PERMANENT WAVE NEUTRALISER – LIQUID, CREAM
12.17
HAIR STRAIGHTENER (RELAXER) - TYPE 1
12.18
HAIR STRAIGHTENER (RELAXER) - TYPE 2 - PART A
12.19
HAIR STRAIGHTENER (RELAXER) - TYPE 2 - PART B
12.20
HAIR STRAIGHTENER (RELAXER) - TYPE 3
12.21
13. NAIL VARNISH AND REMOVER
NAIL VARNISH
13.1
NAIL WHITE PENCIL
13.2
14. NAIL CARE
NAIL CONDITIONER (OIL BASED)
77
14.1
16. TOOTH CARE
TOOTHPASTE
16.1
17. MOUTH WASH / BREATH SPRAY
MOUTHWASH
17.1
MOUTHWASH (CONCENTRATE)
17.2
BREATH SPRAY (PUMP SPRAY)
17.3
78
Frame formulation Number:
1.1 - 2011
SKIN CARE CREAM, LOTION, GEL
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Humectants (e.g. glycerin, propylene glycol, PEG)
20
Ethanol (alcohol, alcohol denat.)
10
Additional ingredients (e.g. vitamins, antioxidants, plant extracts)
10
Bulking agents (e.g. talc, silica, nylon powder)
5
UV filters
5
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. PEG stearate, ceteareth)
5
Preservatives, antimicrobials
2
Colorants
2
Parfum
1
to
Aqua
79
100
Frame formulation Number:
1.2 - 2011
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF SILICONES
Ingredients
Maximum
levels (% w/w)
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
40
Ethanol (alcohol, alcohol denat.)
25
Humectants (e.g. glycerin, propylene glycol, PEG)
20
Additional ingredients (e.g. plant extracts, vitamins)
10
Bulking agents (e.g. starch, kaolin, talc)
5
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. sorbitan sesquioleate, sorbitan stearate)
5
Thickeners (e.g. cellulose gum)
5
UV filters
5
Preservatives, antimicrobials
2
Colorants
2
Parfum
1
to
Aqua
80
100
Frame formulation Number:
1.3 - 2011
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF HUMECTANTS
Ingredients
Maximum
levels (% w/w)
Humectants (e.g. glycerin, propylene glycol, PEG)
50
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
40
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Ethanol (alcohol, alcohol denat.)
20
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceryl stearate, sodium cocoyl isethionate)
10
Bulking agents (e.g. silica, talc)
10
UV filters
5
Film forming polymers (e.g. PVP)
5
Additional ingredients (e.g. vitamins, plant extracts)
5
Thickeners (e.g. carbomer)
5
Preservatives, antimicrobials
2
Colorants
2
Parfum
1
to
Aqua
81
100
Frame formulation Number:
1.4 - 2011
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF BULKING AGENTS
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols )
60
Thickeners (e.g. bentonite, carbomer, cellulose)
60
Humectants (e.g. glycerin, propylene glycol)
40
Bulking agents (e.g. starch, zinc oxide, kaolin)
40
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceryl stearate, sodium laureth sulfate)
25
Ethanol (alcohol, alcohol denat.)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
UV filters
5
Additional ingredients (e.g. plant extracts, antioxidants, chelating agents)
5
Preservatives, antimicrobials
2
Colorants
2
Parfum
1
to
Aqua
82
100
Frame formulation Number:
1.5 - 2011
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF FATTY COMPOUNDS
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
95
Humectants (e.g. glycerin, propylene glycol, PEG)
25
Ethanol (alcohol, alcohol denat.)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceryl stearate, PEG stearate)
15
Thickeners (e.g. carbomer, xanthan gum)
12
Bulking agents (e.g. talc, silica, zinc oxide, nylon powder)
10
Additional ingredients (e.g. vitamins, antioxidants, plant extracts)
10
Cationic polymers (e.g. polyquaternium-7, polyquaternium-24)
5
UV filters
5
Parfum
5
Preservatives, antimicrobials
2
Colorants
2
to
Aqua
83
100
Frame formulation Number:
1.6 - 2011
SKIN CARE CREAM, LOTION, GEL - WITH HIGH LEVEL OF UV FILTERS
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
60
UV filters
30
Humectants (e.g. glycerin, propylene glycol, PEG)
25
Ethanol (alcohol, alcohol denat.)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceryl stearate, PEG stearate)
15
Thickeners (e.g. carbomer, xanthan gum)
12
Bulking agents (e.g. talc, silica, nylon powder)
10
Preservatives, antimicrobials
2
Colorants
2
to
Aqua
84
100
Frame formulation Number:
1.7 - 2011
SKIN CARE CREAM, LOTION, GEL WITH HIGH LEVELS OF PERFUME
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
60
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Humectants (e.g. glycerin, propylene glycol, PEG)
30
Parfum
25
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceyl stearate, PEG stearate)
25
Colorants, colour additives (e.g. opacifying /pearlescent agents)
20
Thickeners (e.g. carbomer, hydroxyethylcellulose)
15
Bulking agents (e.g. silica, nylon powder, starch)
10
UV filters
5
Additional ingredients (e.g. antioxidants, vitamins)
5
Preservatives, antimicrobials
2
to
Aqua
85
100
Frame formulation Number:
1.8 - 2011
ZINC OXIDE BASED CREAM
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
60
Bulking agents (e.g. titanium dioxide, silica, nylon powder)
30
Zinc oxide
25
Humectants (e.g. glycerin, PEG)
20
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
12
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Additional ingredients (e.g. plant extracts, bisabolol)
10
Thickeners (e.g. carbomer, xanthan gum)
5
Ethanol (alcohol, alcohol denat.)
5
Preservatives, antimicrobials
1.5
Parfum
1
to
Aqua
86
100
Frame formulation Number:
1.9 - 2011
SKIN GEL (HYDRO-ALCOHOL BASED)
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
70
Emollients, humectants (e.g. propylene glycol, glycerin)
20
Additional ingredients (e.g. vitamins, plant extracts)
10
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. fatty acid polyglycolethers)
6
Preservatives, antimicrobials
3.5
Thickeners (e.g. carbomer)
5
Colorants
1
Parfum
1
to
Aqua
87
100
Frame formulation Number:
1.10 - 2011
SKIN OIL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
90
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Humectants (e.g. glycerin)
20
Plant extracts (e.g. rosemary, camomile)
10
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. steareth-2, steareth-4)
10
Thickeners (e.g. dextrin palmitate)
5
Parfum
5
Additional ingredients (e.g. antioxidants, colorants, aqua)
5
Preservatives, antimicrobials
1.5
Colorants
1
Oils (e.g. vegetable and/or mineral)
to 100
88
89
Frame formulation Number:
1.12 - 2011
TONIC, COSMETIC WATER
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
70
Humectants (e.g. glycerin, PEG)
25
Plant extracts
10
Oils (e.g. vegetable and/or mineral)
5
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
5
Bulking agents (e.g. silica, nylon powder)
5
Additional ingredients (e.g. vitamins, UV filters)
5
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. sorbitan stearate)
5
Thickeners (e.g. carbomer)
2
Preservatives, antimicrobials
2
Parfum
1.5
Colorants
1
to
Aqua
90
100
1.13 - 2011
Frame formulation Number:
CHEMICAL EXFOLIATION PRODUCTS
Ingredients
Maximum
levels (% w/w)
Emollients, humectants (e.g. glycerin)
40
Oils (e.g. vegetable and/or mineral)
30
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. sorbitan stearate, TEA-stearate)
25
Ethanol (alcohol, alcohol denat.)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Chemical exfoliating agents (e.g. lactic acid, glycolic acid, salicylic acid *)
10
Additional ingredients (e.g. hydrolysed proteins, plant extracts, vitamins)
10
Thickeners (e.g. carbomer)
5
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
* maximum concentration of salicylic acid permitted is 2 %
91
100
Frame formulation Number:
1.14 – 2011
SKIN CARE (SILICONE BASED)
Ingredients
Maximum
levels (% w/w)
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
90
Emollients (e.g. squalane)
25
Additional ingredients (e.g. vitamins, plant extracts)
10
92
Frame formulation Number:
1.15 - 2011
PETROLEUM JELLY
Ingredients
Maximum
levels (% w/w)
100
Petrolatum
0.5
Parfum
93
Frame formulation Number:
1.16 - 2011
TALCUM POWDER
(LOOSE OR PRESSED)
Ingredients
Maximum
levels (% w/w)
Talc
99
Bulking agents (e.g. starch, nylon powder, sodium polyacrylate
copolymer, kaolin, magnesium/calcium carbonate)
80
Colorants, colour additives (e.g. opacifying / pearlescent agents)
40
Binding agents (e.g. vegetable and/or mineral oils, fatty acid esters)
10
Parfum
10
Additional ingredients (e.g. UV filters, vitamins, antioxidants)
5
Preservatives, antimicrobials
1
94
Frame formulation Number:
1.17 - 2011
LIP CARE (STICK, CREAM, GEL)
Oils (e.g. vegetable and/or mineral), waxes and fats (e.g. fatty alcohols)
90
Humectants (e.g. glycerin, propylene glycol)
50
Aqua
50
Film forming agents (e.g. PVP/hexadecene copolymer)
30
Silicones including volatile silicones (e.g. dimethicone, cyclomethicone)
20
Thickeners (e.g. carbomer, hydroxyethylcellulose)
15
UV filters
15
Bulking agents (e.g. silica, nylon powder)
10
Emulsifying agents (e.g. trioleyl phosphate)
5
Cosmetic colorants
5
Ethanol (alcohol, alcohol denat.)
5
Additional ingredients (e.g. vitamins, antioxidants)
5
Parfum
2
Preservatives, antimicrobials
1
Flavouring agents
1
95
Frame formulation Number:
2.1 - 2011
FOAMING SKIN CLEANSER
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium laureth sulfate)
40
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Amphoteric / non-ionic surfactants (e.g. ethoxylated sorbitan esters)
20
Humectants (e.g. glycerin, propylene glycol, sorbitol)
20
Abrasives (e.g. polyethylene, walnuts)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
5
Thickeners (e.g. hydroxyethylcellulose)
5
Additional ingredients (e.g. plant extracts, vitamins)
5
Parfum
3
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
96
100
Frame formulation Number:
2.2 - 2011
FOAMING SKIN CLEANSER – WITH HIGH LEVEL OF OILS AND/OR HUMECTANT
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
50
Humectants (e.g. glycerin, propylene glycol)
50
Anionic surfactants (e.g. sodium laureth sulfate,
disodium laureth sulfosuccinate)
30
Non-ionic / amphoteric surfactants (e.g. ceteth-20, ethoxylated
long chain alcohols)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Abrasives (e.g. polyethylene, walnuts)
10
Thickeners (e.g. carbomer)
6
Additional ingredients (e.g. pearlescent agents such as glycol distearate)
5
Preservatives, antimicrobials
2
Parfum
1
Colorants
1
to
Aqua
97
100
Frame formulation Number:
2.3 - 2011
MAKE-UP REMOVER - NON FOAMING CLEANSER
(INCLUDING TWO-PHASE PRODUCTS)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
80
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Humectants (e.g. glycerin, propylene glycol)
20
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. glyceryl stearate, polysorbate 60)
15
Ethanol (alcohol, alcohol denat.)
10
Thickeners (e.g. hydroxyethylcellulose)
5
Additional ingredients (e.g. chelating agents, plant extracts, antioxidants)
5
Preservatives, antimicrobials
2
Parfum
1
Colorants
1
to
Aqua
98
100
Frame formulation Number:
2.4 - 2011
MAKE-UP REMOVER - NON FOAMING OIL CLEANSER
Ingredients
Maximum
levels (% w/w)
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Humectants (e.g. glycerin)
20
Ethanol (alcohol, alcohol denat.)
10
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. steareth-2, steareth-4)
10
Additional ingredients (e.g. antioxidants, plant extracts, aqua)
10
Thickeners (e.g. dextrin palmitate)
5
Preservatives, antimicrobials
1.5
Parfum
1
Colorants
1
Oils (e.g. mineral and/or vegetable)
to 100
99
Frame formulation Number:
2.5 - 2011
GENTLE CLEANSING GEL
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium lauroyl sarcosinate, disodium
laureth sulfosuccinate)
20
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
20
Humectants (e.g. glycerin, propylene glycol)
20
Non-ionic / amphoteric surfactants
(e.g. betaine derivatives, glucose derivatives)
15
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Foam boosting agents (e.g. cocamide MEA)
5
Additional ingredients (e.g. pearlescent agents, plant extracts)
5
Thickeners (e.g. hydroxypropyl methylcellulose)
5
Preservatives, antimicrobials
2
Parfum
1
Colorants
1
to
Aqua
100
100
Frame formulation Number:
2.6 - 2011
SKIN CLEANSING CREAM, LOTION, SCRUB, GEL
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
95
Humectants (e.g. glycerin, propylene glycol, PEG)
25
Anionic / amphoteric / non-ionic surfactants
(e.g. sodium cocoyl isethionate, sodium laureth sulfate)
25
Ethanol (alcohol, alcohol denat.)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Thickeners (e.g. carbomer, xanthan gum)
12
Bulking agents (e.g. talc, silica, zinc oxide, nylon powder)
10
Abrasives (e.g. polyethylene, walnuts)
10
Additional ingredients (e.g. vitamins, antioxidants, plant extracts)
10
Cationic polymers (e.g. polyquaternium-7, polyquaternium-24)
5
Parfum
5
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
101
100
Frame formulation Number:
2.7 - 2011
BODY SCRUB (GEL, CREAM)
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium lauroyl sarcosinate,
sodium laureth sulfate, disodium laureth sulfosuccinate)
30
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Humectants (e.g. glycerin, hexylene glycol)
30
Abrasives (e.g. polyethylene, walnuts)
20
Non-ionic / amphoteric surfactants (e.g. betaine derivatives,
glucose derivatives)
20
Foam boosting agents (e.g. ethoxylated long-chain alcohols,
alkyl polyglucose)
10
Emulsifying agents (e.g. PEG-6 laurate, glyceryl cocoate)
10
Thickeners (e.g. hydroxypropyl methylcellulose,
sodium chloride)
10
Parfum
6
Additional ingredients (e.g. pearlescent agents, plant extracts)
6
Cationic polymers (e.g. polyquaternium-7)
3
Colorants
1
Preservatives, antimicrobials
1
to 100
Aqua
102
Frame formulation Number:
2.8 - 2011
SOAP - TOILET
Ingredients
Maximum
levels (% w/w)
Soap (vegetable base, palm oil and coconut oil fatty acids)
99
Glycerin
20
Emollients, humectants (e.g. propylene glycol)
10
Amphoteric / anionic surfactants (e.g. cocamidopropyl betaine)
5
Oils (e.g.vegetable and/or mineral)
5
Parfum
5
Colorants
2.5
Titanium dioxide
2
Cationic polymers (e.g. polyquaternium-7)
2
Additional ingredients (e.g. plant extracts)
2
Preservatives, antimicrobials, antioxidants, chelating agents
1
to
Aqua
103
100
Frame formulation Number:
2.9 - 2011
LIQUID SOAP
Ingredients
Maximum
levels (% w/w)
Anionic / amphoteric surfactants (e.g. laureth sulfate, betaine)
40
Non-ionic surfactants (e.g. glucose derivatives)
40
Soaps (sodium, potassium or triethanolamine)
20
Emollients (e.g. PEG-7, glyceryl cocoate)
20
Humectants (e.g. glycerin, propylene glycol, sorbitol)
20
Thickeners (e.g. sodium chloride, hydroxycellulose derivatives)
5
Additional ingredients (e.g. plant extracts, UV filters)
5
Pearlescent agents (e.g. glycol distearate, glycol stearate)
5
Skin conditioning agents (e.g. cationic cellulose)
5
Parfum
5
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
100
NB: liquid “soaps” may be soap based, totally synthetic based or a combination of both soap and synthetic.
104
Frame formulation Number:
2.10 - 2011
BATH AND SHOWER GEL, CREAM, MILK, PASTE
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Humectants (e.g. glycerin, hexylene glycol)
30
Anionic surfactants (e.g. sodium lauroyl sarcosinate,
sodium laureth sulfate, disodium laureth sulfosuccinate)
25
Non-ionic / amphoteric surfactants (e.g. betaine derivatives,
glucose derivatives)
20
Foam boosting agents (e.g. ethoxylated long-chain alcohols,
alkyl polyglucose)
10
Emulsifying agents (e.g. PEG-6 laurate, glyceryl cocoate)
10
Thickeners (e.g. hydroxypropyl methylcellulose,
sodium chloride)
10
Additional ingredients (e.g. pearlescent agents, plant extracts)
10
Parfum
6
Cationic polymers (e.g. polyquaternium-7)
3
Colorants
1
Preservatives, antimicrobials
1
to 100
Aqua
105
Frame formulation Number:
2.11 - 2011
SLIGHTLY FOAMING SHOWER CREAM, MILK
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
60
Humectants (e.g. glycerin, hexylene glycol)
30
Anionic surfactants (e.g. sodium lauroyl sarcosinate,
sodium laureth sulfate, disodium laureth sulfosuccinate)
10
Non-ionic / amphoteric surfactants (e.g. betaine derivatives,
glucose derivatives)
10
Foam boosting agents (e.g. ethoxylated long-chain alcohols,
alkyl polyglucose)
10
Emulsifying agents (e.g. PEG-6 laurate, glyceryl cocoate)
10
Thickeners (e.g. hydroxypropyl methylcellulose,
sodium chloride)
10
Additional ingredients (e.g. pearlescent agents, plant extracts)
10
Parfum
6
Cationic polymers (e.g. polyquaternium-7)
3
Colorants
1
Preservatives, antimicrobials
1
to 100
Aqua
106
Frame formulation Number:
2.12 - 2011
BATH SALTS / CUBES
Ingredients
Maximum
levels (% w/w)
Sodium salts (e.g. sodium carbonate, sodium bicarbonate,
sodium sesquicarbonate, sodium chloride)
99
Parfum
5
Emollients (e.g. glycerin)
5
Anionic / amphoteric / non-ionic surfactants
(e.g. sodium dodecylbenzenesulfonate)
1
Oils (e.g. vegetable and/or mineral)
1
Colorants
1
Binding agents (e.g. silica)
0.5
NB: for cubes desintegrating agents (e.g. talc, starch)
6
107
Frame formulation Number:
2.13 - 2011
BATH AND SHOWER OIL (INCLUDING BATH BEADS)
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. PEG stearate, ethers of oleyl alcohol)
15
Parfum
10
Plant extracts (e.g. ivy extract, rosemary extract)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
5
Additional ingredients (e.g. vitamins, UV filters)
1.5
Colorants
1
Antioxidants
0.1
Oils (e.g. vegetable and/or mineral) and emollients
(e.g. glycerin, PEG, isopropyl myristate)
to 100
In case of capsules, or beads : Nature of the capsule, e.g. caprolactone
and cellulose derivatives, agar and plasticisers (such as glycerin, sorbitol)
108
Frame formulation Number:
2.14 - 2011
FOOTBATH
Ingredients
Maximum
levels (% w/w)
Anionic / amphoteric / non-ionic surfactants (e.g. sodium laureth sulfate)
20
Emollients, humectants (e.g. glycol stearate, butylene glycol)
10
Emulsifying agents (e.g. ethoxylated long chain alcohols)
10
Foam boosting agents (e.g. cocamide MEA)
10
Ethanol (alcohol, alcohol denat.)
5
Additional ingredients (e.g. plant extracts)
5
Preservatives, antimicrobials, antioxidants
1
Parfum
1
Colorants
1
to
Aqua
109
100
Frame formulation Number:
3.1 - 2011
CHEMICAL DEPILATORY - CREAM, GEL
Ingredients
Maximum
levels (% w/w)
Alkaline agents (e.g. calcium/sodium/potassium carbonate,
sodium/potassium silicate, sodium hydroxide, calcium oxide)
15
Thickeners (e.g. propylene carbonate)
15
Emulsifying agents (e.g. ethoxylated long chain alcohols / esters)
15
Emollients, humectants and waxes (e.g. glycerin, long chain alcohols)
15
Reducing agents (e.g. thioglycerin, thioglycolic acid and its salts*)
8
Additional ingredients (e.g. plant extracts, colorants, chelating agents)
5
Parfum
1
to
Aqua
* less than 5% calculated as thioglycolic acid
pH 11-12.7
110
100
Frame formulation Number:
3.2 - 2011
PHYSICAL DEPILATORY WAX – RESIN BASED
Ingredients
Maximum
levels (% w/w)
Tackifying agents and thickeners (e.g. triethylene glycol rosinate,
glyceryl rosinate, polyethylene, ethylene/VA copolymer,
hydrogenated microcrystalline wax, paraffin, colophonium,
beeswax, silica)
to
100
Emollients, humectants (e.g. paraffinum liquidum, glycerin)
25
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. PEG-40 hydrogenated castor oil)
10
Aqua
5
Additional ingredients (e.g. plant extracts, skin conditioning agents,
opacifying agents, antioxidants)
3
Colorants
3
Parfum
1
Preservatives, antimicrobials
1
111
Frame formulation Number:
3.3 - 2011
PHYSICAL DEPILATORY WAX – SUGAR BASED
Ingredients
Maximum
levels (% w/w)
Tackifying agents (e.g. sucrose)
90
Aqua
12
Additional ingredients (e.g. plant extracts, antioxidants, colorants)
3
pH adjuster (e.g. citric acid)
2
Parfum
1
112
Frame formulation Number:
4.1 – 2011
BLEACH FOR BODY HAIR
Ingredients
Maximum
levels (% w/w)
Emollients (e.g. isopropyl myristate, petrolatum)
15
Emulsifying agents (e.g. glyceryl stearate, ethoxylated alcohols)
15
Hydrogen peroxide
4
Hydrogen peroxide stabilising agents
0.5
pH adjusters
qs pH 2-3
to
Aqua
113
100
5.1 - 2011
Frame formulation Number:
ANTIPERSPIRANT AEROSOL SPRAY
(WITH ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Propellants (e.g. dimethyl ether, hydrocarbons)
90
Emollients, humectants (e.g. isopropyl myristate, glycerin,
propylene glycol)
20
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
20
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
20
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
20
Aluminium salts (e.g. aluminum chlorohydrate)
10
Thickeners (e.g. stearalkonium bentonite)
10
Ethanol (alcohol, alcohol denat.)
5
Bulking agents (e.g. perlite, nylon powder)
5
Additional ingredients (e.g. vitamins, plant extracts)
5
Deodorants (e.g. zinc ricinoleate)
4
Parfum
3
Preservatives, antimicrobials
0.1
114
5.2 - 2011
Frame formulation Number:
DEODORANT AEROSOL SPRAY
(WITHOUT ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
95
Propellants (e.g. dimethyl ether, hydrocarbons, compressed gas)
90
Humectants, emollients (e.g. isopropyl myristate, glycerin, propylene glycol)
25
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
15
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
15
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
15
Thickeners (e.g. stearalkonium bentonite)
10
Bulking agents (e.g. perlite, nylon powder)
5
Additional ingredients (e.g. plant extracts)
5
Deodorants (e.g. zinc ricinoleate)
4
Parfum
3
Preservatives, antimicrobials
1
to
Aqua
NB: includes aerosol spray compressed gas (e.g. air, nitrogen, carbon dioxide)
115
100
Frame formulation Number:
5.3 - 2011
ANTIPERSPIRANT ROLL-ON
(WITH ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
65
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
30
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
30
Antiperspirant salts (e.g. aluminium salt or aluminium/zirconium complex)
25
Thickeners (e.g. starch), emollients (e.g. glycerin),
emulsifying agents (e.g. steareth, PPG ethers)
25
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
20
Bulking agents (e.g. perlite, nylon powder)
10
Additional ingredients (e.g. plant extracts)
5
Deodorants (e.g. zinc ricinoleate)
5
Parfum
3
Preservatives, antimicrobials
1.5
to
Aqua
116
100
5.4 - 2011
Frame formulation Number:
DEODORANT ROLL-ON
(WITHOUT ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
65
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
30
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
30
Thickeners (e.g. starch), emollients (e.g. glycerin),
emulsifying agents (e.g. steareth, PPG ethers)
25
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
20
Bulking agents (e.g. perlite, nylon powder)
20
Additional ingredients (e.g. plant extracts, EDTA)
5
Deodorants (e.g. zinc ricinoleate)
5
Parfum
3
Preservatives, antimicrobials
1.5
to
Aqua
117
100
Frame formulation Number:
5.5 - 2011
ANTIPERSPIRANT STICK
(WITH ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Humectants (e.g. propylene glycol, glycerin)
80
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
50
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
45
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
45
Emollients (e.g. isopropyl myristate, cetyl alcohol, fatty esters)
30
Antiperspirant salts (e.g. aluminum chlorohydrate,
aluminum zirconium tetrachlorohydrate)
25
Soaps, emulsifying agents (e.g. sodium stearate)
20
Bulking agents (e.g. stearalkonium bentonite, perlite, nylon powder, talc)
20
Additional ingredients (e.g. plant extracts, EDTA)
5
Deodorants (e.g. zinc ricinoleate)
5
Parfum
3
Preservatives, antimicrobials
1
to
Aqua
118
100
5.6 - 2011
Frame formulation Number:
DEODORANT STICK
(WITHOUT ANTIPERSPIRANT SALT)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Humectants (e.g. propylene glycol, glycerin)
80
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
50
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
45
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
45
Emollients (e.g. isopropyl myristate, cetyl alcohol, fatty esters)
30
Soaps, emulsifying agents (e.g. sodium stearate)
25
Bulking agents (e.g. stearalkonium bentonite, perlite, nylon powder, talc)
20
Additional ingredients (e.g. plant extracts, EDTA)
5
Deodorants (e.g. zinc ricinoleate)
5
Parfum
3
Preservatives, antimicrobials
1
to
Aqua
119
100
Frame formulation Number:
5.7 - 2011
ANTIPERSPIRANT LIQUID SQUEEZE PACK OR PUMP SPRAY
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Aluminium salts (e.g. aluminum chlorohydrate)
30
Emollients, humectants (e.g. isopropyl myristate, glycerin,
propylene glycol derivatives)
25
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
15
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
15
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
15
Additional ingredients (e.g. plant extracts, EDTA)
5
Deodorants (e.g. zinc ricinoleate)
4
Parfum
3
Preservatives, antimicrobials
1
to
Aqua
120
100
Frame formulation Number:
5.8 - 2011
DEODORANT LIQUID SQUEEZE PACK OR PUMP SPRAY
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
95
Emollients, humectants (e.g. propylene glycol, glycerin)
25
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
15
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
15
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
15
Additional ingredients (e.g. plant extracts)
5
Deodorants (e.g. zinc ricinoleate)
4
Parfum
3
Preservatives, antimicrobials
1
to
Aqua
121
100
Frame formulation Number:
5.9 - 2011
ANTIPERSPIRANT CREAM
Ingredients
Maximum
levels (% w/w)
Oils and waxes (e.g. vegetable and/or mineral, isoparaffin)
30
Silicones including volatile silicones (e.g. dimethicone, cyclopentasiloxane)
30
Antiperspirant salts (e.g. aluminium or zirconium salts)
30
Humectants (e.g. propylene glycol)
25
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
20
Emollients (e.g. long chain alcohols)
20
Emulsifying agents (e.g. ceteareth-30, PEG stearate)
10
Additional ingredients (e.g. plant extracts, EDTA)
5
Deodorants (e.g. zinc ricinoleate)
5
Parfum
3
Preservatives, antimicrobials
0.5
to
Aqua
122
100
Frame formulation Number:
6.1 - 2011
SHAVING CREAM
Ingredients
Maximum
levels (% w/w)
Soaps (e.g. mixed sodium and potassium stearate, laurate and
cocoate)
60
Humectants (e.g. glycerin, propylene glycol)
30
Thickeners, emulsifying agents
(e.g. fatty acid glycol esters, long chain alcohols)
15
Emollients (e.g. oils (vegetable and/or mineral), fatty acid esters)
15
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Anionic / amphoteric / non-ionic surfactants (e.g. sodium laureth sulfate,
betaine derivatives)
5
Parfum
2
Additional ingredients (e.g. vitamins)
3
Opacifying agents (e.g. titanium dioxide)
1
Anticorrosives (e.g. sodium metasilicate)
0.5
Chelating agents
0.5
Antioxidants
0.1
to
Aqua
123
100
6.2 - 2011
Frame formulation Number:
BRUSHLESS SHAVING CREAM
Ingredients
Maximum
levels (% w/w)
Fatty acids
40
Oils (e.g. vegetable and/or mineral)
20
Soaps (e.g. TEA-stearate and TEA-laurate)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Additional ingredients (e.g. vitamins, plant extracts)
3
Parfum
2
Antioxidants, chelating agents
0.5
to
Aqua
124
100
Frame formulation Number:
6.3 - 2011
SHAVE GEL
Ingredients
Maximum
levels (% w/w)
Humectants (e.g. glycerin)
15
Film forming polymers (e.g. glyceryl polymethacrylate)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Thickeners (e.g. hydroxyethylcellulose)
3
Emulsifying agents, anionic / amphoteric / non-ionic surfactants (e.g. sodium laureth sulfate)
Additional ingredients (e.g. vitamins, plant extracts)
3
Parfum
1
Colorants
1
Preservatives, antimicrobials
1
to
Aqua
125
100
3
Frame formulation Number:
6.4 - 2011
SHAVING GEL (POST FOAMING)
Ingredients
Maximum
levels (% w/w)
Soaps (e.g. potassium salts of fatty acids, triethanolamine salts of fatty acids)
30
Humectants (e.g. glycerin)
15
Emulsifying agents, anionic / amphoteric / non-ionic surfactants (e.g. PEG-150 distearate)
Additional ingredients (e.g. vitamins, plant extracts)
6
Post foaming agents (e.g. hydrocarbon)
5
Thickeners (e.g. cellulose derivatives)
2
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
2
Parfum
2
Skin conditioning agents (e.g. polyquaternium-7)
2
Colorants
1
Preservatives, antimicrobials
0.2
to
Aqua
126
100
10
Frame formulation Number:
6.5 - 2011
SHAVING FOAM AEROSOL
Ingredients
Maximum
levels (% w/w)
Soaps (e.g. potassium salts of fatty acids, triethanolamine salts of fatty acids)
30
Anionic/Amphoteric/Non-ionic surfactants (e.g. sodium laureth sulfate,
betaine derivatives, polysorbate)
15
Humectants (e.g. glycerin)
15
Propellants (e.g. hydrocarbons)
15
Emollients (e.g. waxes)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Emulsifying agents (e.g. PEG derivatives)
5
Additional ingredients (e.g. plant extracts, vitamins)
3
Parfum
1
Preservatives, antimicrobials
1
Thickeners (e.g. cellulose derivatives)
1
to
Aqua
127
100
Frame formulation Number:
6.6 - 2011
SHAVING SOAP / STICK
Ingredients
Maximum
levels (% w/w)
Mixed sodium and potassium stearate and laurate
90
Humectants (e.g. glycerin)
15
Non-ionic surfactants (e.g. polysorbate)
5
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
5
Additional ingredients (e.g. vitamins, plant extracts, chelating agents)
3
Parfum
2
Opacifying agents (e.g. titanium dioxide)
1
Preservatives, antimicrobials
1
Antioxidants
0.1
128
Frame formulation Number:
6.7 - 2011
AFTERSHAVE BALM
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
40
Oils (e.g. vegetable and/or mineral) and fats
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Emollients, humectants (e.g. propylene glycol, glycerin)
20
Additional ingredients (e.g. UV filters, vitamins, bisabolol, plant extracts)
10
Emulsifying agents, anionic / amphoteric / non-ionic surfactants (e.g. glyceryl stearate)
Parfum
5
Thickeners (e.g. carbomer)
1
Colorants
1
Preservatives, antimicrobials
1
Chelating agents, antioxidants
0.5
to
Aqua
129
100
5
Frame formulation Number:
6.8 - 2011
AFTERSHAVE LOTION
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
90
Emollients, humectants (e.g. glycerin, propylene glycol, isopropyl myristate)
15
Parfum
10
Additional ingredients (e.g. plant extracts, astringents such as hamamelis)
10
Colorants
1
Chelating agents, antioxidants
0.5
to
Aqua
130
100
Frame formulation Number:
7.1 - 2011
FOUNDATION and BLUSHER (LIQUID, CREAM, FOAM)
Ingredients
Maximum
levels (% w/w)
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
60
Oils (e.g. vegetable and/or mineral)
40
Emollients (e.g. propylene glycol, lanolin)
30
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Bulking agents (e.g. talc, kaolin, silica, starch)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
30
Humectants (e.g. glycerin, PEG)
25
Thickeners, emulsifying agents
(e.g. glyceryl stearate, PEG stearate)
20
Ethanol (alcohol, alcohol denat.)
15
UV filters
10
Anionic / amphoteric / non-ionic surfactants (e.g. sodium lauroyl sarcosinate)
5
Additional ingredients (e.g. vitamins, plant extracts)
5
Parfum
1
Preservatives, antimicrobials
1
to
Aqua
131
100
Frame formulation Number:
7.2 - 2011
FOUNDATION - ANHYDROUS
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral)
70
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
60
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
40
Bulking agents (e.g. nylon, talc, kaolin, silica)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
30
Waxes (e.g. cera alba, carnauba)
20
Thickeners, emulsifying agents
(e.g. sodium stearate, potassium stearate)
20
Humectants (e.g. glycerin)
10
Emollients (e.g. lanolin)
10
UV filters
10
Additional ingredients (e.g.vitamins, antioxidants)
5
Preservatives, antimicrobials
1
Parfum
1
132
Frame formulation Number:
7.3 - 2011
CONCEALER CREAM
Ingredients
Maximum
levels (% w/w)
Colorants, colour additives (e.g. opacifying / pearlescent agents)
40
Oils (e.g. vegetable and/or mineral)
20
Emollients, humectants (e.g. oleyl alcohol)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Bulking agents (e.g. nylon, talc, starch, kaolin)
20
Ethanol (alcohol, alcohol denat.)
15
Emulsifying agents (e.g. glyceryl stearate)
10
Additional ingredients (e.g. vitamins, antioxidants)
6
Thickeners
3
UV filters
3
Preservatives, antimicrobials
2
to
Aqua
133
100
Frame formulation Number:
7.4 - 2011
CONCEALER STICK
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
70
Additional ingredients (e.g. UV filters, antioxidants)
5
Humectants (e.g. glycerin)
2
Smoothing agents, anti-blemish agents (e.g. salicylic acid)
2
Preservatives, antimicrobials
2
Thickeners
1
Chelating agents
0.1
to
Aqua
134
100
7.5 - 2011
Frame formulation Number:
FOUNDATION / CONCEALER (SOLID)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
55
Emollients (e.g. lanolin oil, isopropyl myristate)
50
Opacifying agents (e.g. calcium carbonate)
40
Colorants, colour additives (e.g. pearlescent agents)
40
Aqua
40
Ethanol (alcohol, alcohol denat.)
15
Bulking agents (e.g. talc)
15
Thickeners (e.g. stearalkonium hectorite,
propylene carbonate)
10
UV filters
10
Emulsifying agents (e.g. PEG derivatives, PPG derivatives)
6
Additional ingredients (e.g. plant extracts, vitamins, antioxidants)
5
Preservatives, antimicrobials
2
135
Frame formulation Number:
7.6 - 2011
FACE POWDER
Ingredients
Maximum
levels (% w/w)
Mineral Bulking agents (e.g. talc, mica, kaolin, zinc oxide, titanium dioxide,
magnesium/calcium carbonate)
95
Other Bulking agents (e.g. starch, nylon powder, polyethylene powder)
50
Binding agents (e.g. vegetable and/or mineral oils, fatty acid esters)
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
45
45
Colorants, colour additives (e.g. opacifying / pearlescent agents)
30
Anticaking agents (e.g. zinc/magnesium stearate, zinc/magnesium laurate)
15
UV Filters
10
Additional ingredients (e.g. antioxidants, humectants, vitamins)
5
Anionic / amphoteric / non-ionic surfactants (e.g. polysorbate)
3
Preservatives, antimicrobials
1.5
Parfum
1.5
136
Frame formulation Number:
7.7 - 2011
LIPSTICK / LIP CREAM (INCLUDING CONCEALER STICKS/CREAMS)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), esters and fatty acids
65
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
65
Colorants, colour additives (e.g. opacifying / pearlescent agents)
65
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
40
Emollients (e.g. glycerin, oleyl alcohol, cetyl acetate, lanolin derivatives)
40
Waxes (e.g. carnauba, candelilla cera, paraffin)
35
Film forming polymers (e.g. PVP/hexadecene copolymer)
25
Thickeners (e.g. quaternium-18)
20
Bulking agents (e.g. talc, silica, nylon powder)
20
Photoprotective products contain UV filters
(e.g. titanium dioxide, zinc oxide)
10
Additional ingredients (e.g. vitamins, hydrolysed proteins, antioxidants)
10
Emulsifying agents (e.g. trioleyl phosphate)
5
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
5
Parfum
2
Preservatives, antimicrobials
1
Flavouring agents
1
to
Aqua
137
100
Frame formulation Number:
7.8 - 2011
LIP COLOUR and GLOSSER/BALM
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
Film forming polymers (e.g. stearalkonium hectorite, polybutene)
90
80
Emollients (e.g. glycerin, propylene glycol)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
40
Aqua
40
Colorants, colour additives (e.g. opacifying / pearlescent agents)
30
Bulking agents (e.g. talc, silica, nylon powder)
20
Emulsifying agents (e.g. trioleyl phosphate)
5
Photoprotective products contain UV filters
(e.g. titanium dioxide, zinc oxide)
10
Thickeners (e.g. carbomer, hydroxyethylcellulose)
10
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
5
Additional ingredients (e.g. vitamins, proteins, antioxidants)
5
Parfum
2
Preservatives, antimicrobials
1
Flavouring agents
1
Oral care-sweetening agents (e.g. saccharin)
0.02
138
Frame formulation Number:
7.9 - 2011
LIP PENCIL
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
90
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Colorants, colour additives (e.g. opacifying / pearlescent agents)
50
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
40
Bulking agents (e.g. talc, silica)
30
Polymers (e.g. nylon, PVP)
20
Thickeners (e.g. stearalkonium hectorite)
10
Additional ingredients (e.g. UV filters, vitamins, antioxidants)
5
Emulsifying agents (e.g. non-ionics such as polysorbate 60,
PEG-6 sorbitan stearate)
5
Preservatives, antimicrobials
1
Parfum
0.5
139
Frame formulation Number:
7.10 - 2011
LIPSTICK SEALER / LIP COAT
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
95
Resins (e.g. PVP)
10
Plasticisers (e.g. diisopropyl adipate)
5
Thickeners (e.g. hydroxyethylcellulose)
1
140
Frame formulation Number:
7.11 - 2011
LIP AND EYE FIX
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
90
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Liquid paraffin and isoparaffin(e.g. branched-chain isoparaffin (C11-C16), isododecane, isohexadecane)
40
Humectants (e.g. glycerin, propylene glycol)
25
Emulsifying agents, thickeners (e.g. polysorbate)
25
Bulking agents (e.g. talc, zinc stearate, silica)
15
Emollients (e.g. long chain alcohols, isopropyl myristate)
10
Polymers, resins (e.g. nylon, PVP)
10
Additional ingredients (e.g. vitamins, UV filters, plant extracts)
5
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
141
100
Frame formulation Number:
7.12 - 2011
EYE FIX - ANHYDROUS
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
70
Liquid paraffin and isoparaffin(e.g. branched chain isoparaffin (C11-C16), isododecane, isohexadecane)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Bulking agents (e.g. talc, silica, nylon powder)
40
Thickeners (e.g. stearalkonium hectorite)
15
Additional ingredients (e.g. vitamins, plant extracts, antioxidants)
5
Preservatives, antimicrobials
1
Parfum
1
142
Frame formulation Number:
7.13 - 2011
LIP INK (PENCIL)
Ingredients
Maximum
levels (% w/w)
Humectants (e.g. glycerin, propylene glycol)
20
Ethanol (alcohol, alcohol denat.)
20
Polymers, resins (e.g. PVP, dimethicone copolyol)
15
Emulsifying agents (e.g. polysorbate)
10
Colorants, colour additives (e.g. opacifying / pearlescent agents)
10
Additional ingredients (e.g. vitamins, UV filters, antioxidants)
5
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
143
100
Frame formulation Number:
7.14 - 2011
LIP INK (LIQUID)
Ingredients
Maximum
levels (% w/w)
Humectants (e.g. glycerin, propylene glycol)
20
Ethanol (alcohol, alcohol denat.)
10
Emulsifying agents (e.g. trioleyl phosphate, sodium lauryl phosphate)
10
Polymers, resins (e.g. xanthan gum, carbomer)
10
Colorants, colour additives (e.g. opacifying / pearlescent agents)
10
Oils (e.g. vegetable and/or mineral) and fats
5
Additional ingredients (e.g. vitamins, antioxidants)
5
Preservatives, antimicrobials
2
Parfum
1
to
Aqua
144
100
Frame formulation Number:
7.15 - 2011
EYE SHADOW, BLUSHER and LINER
(POWDER)
Ingredients
Maximum
levels (% w/w)
Colorants, colour additives (e.g. opacifying / pearlescent agents)
80
Binding agents, oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Anticaking agents (e.g. zinc/magnesium stearate, zinc/magnesium laurate)
10
Additional ingredients (e.g. humectants, vitamins, UV filters)
5
Parfum
1
Preservatives, antimicrobials
1
Bulking agents (e.g. talc, silica, starch, nylon powder, polyethylene powder) to
145
100
Frame formulation Number:
7.16 - 2011
EYE SHADOW and BLUSHER
(CREAM)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral) and waxes 70
Colorants, colour additives (e.g. opacifying / pearlescent agents)
50
Bulking agents (e.g. talc, silica, nylon powder)
20
Emulsifying agents (e.g. PEG stearate, polysorbate)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Thickeners (e.g. carbomer)
5
Additional ingredients (e.g. vitamins, plant extracts, UV filters, antioxidants)
5
Parfum
1
Preservatives, antimicrobials
1
to
Aqua
146
100
Frame formulation Number:
7.17 - 2011
EYE SHADOW and BLUSHER - ANHYDROUS
(CREAM, STICK, POWDER, …)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
70
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
70
Colorants, colour additives (e.g. opacifying / pearlescent agents)
60
Liquid paraffin and isoparaffin(e.g. branched chain isoparaffin (C11-C16), isododecane, isohexadecane)
50
Bulking agents (e.g. talc, silica, nylon powder)
40
Thickeners (e.g. stearalkonium hectorite)
15
Film forming polymers (e.g. PVP/hexadecene copolymer)
15
Additional ingredients (e.g. vitamins, plant extracts, antioxidants, UV filters)
5
Preservatives, antimicrobials
1
Parfum
1
147
Frame formulation Number:
7.18 - 2011
EYE PENCIL
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
70
Liquid paraffin and isoparaffin(e.g. branched chain isoparaffin (C11-C16), isododecane, isohexadecane)
50
Colorants, colour additives (e.g. opacifying / pearlescent agents)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
50
Bulking agents (e.g. talc)
30
Polymers, resins (e.g. nylon)
20
Anionic / amphoteric / non-ionic surfactants (e.g. polysorbate 60,
PEG-6 sorbitan stearate)
5
UV filters
5
Additional ingredients (e.g. vitamins, plant extracts, antioxidants)
5
Preservatives, antimicrobials
1
Parfum
0.3
148
Frame formulation Number:
7.19 - 2011
EYE LINER - REGULAR
(LIQUID, CREAM)
Ingredients
Maximum
levels (% w/w)
Film forming polymers (e.g. acrylic resin, ammonium acrylates copolymer)
40
Colorants, colour additives (e.g. opacifying / pearlescent agents)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Humectants (e.g. propylene glycol, glycerin)
20
Emulsifying agents (e.g. polysorbate, PEG oleate, TEA-oleate)
10
Thickeners (e.g. carbomer,
magnesium/aluminium silicate, cellulose)
10
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
10
Additional ingredients (e.g. vitamins, plant extracts)
5
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
149
100
Frame formulation Number:
7.20 - 2011
EYE LINER - WATERPROOF
(LIQUID, CREAM, PASTE)
Ingredients
Maximum
levels (% w/w)
Resins, film forming polymers (e.g. acrylic resin, ammonium
acrylates copolymer)
30
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
20
Thickeners (e.g. stearalkonium hectorite, propylene carbonate)
15
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
10
Additional ingredients (e.g. vitamins, plant extracts, aqua)
10
Humectants (e.g. propylene glycol, glycerin)
8
Bulking agents (e.g. talc, kaolin, zinc stearate)
5
Preservatives, antimicrobials
1
Parfum
1
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
150
to
100
Frame formulation Number:
7.21 - 2011
EYE LINER
(CAKE)
Ingredients
Maximum
levels (% w/w)
Bulking agents (e.g. talc)
70
Colorants, colour additives (e.g. opacifying / pearlescent agents)
50
Emulsifying agents, binding agents (e.g. fatty acid esters)
10
Additional ingredients (e.g. vitamins, plant extracts)
5
Parfum
1
Preservatives, antimicrobials
1
151
Frame formulation Number:
7.22 - 2011
MASCARA - REGULAR
Ingredients
Maximum
levels (% w/w)
Film forming polymers (e.g. ammonium acrylates copolymer,
cellulose derivatives, acetyl trihexyl citrate)
45
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
25
Emulsifying agents (e.g. TEA-stearate)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Humectants (e.g. propylene glycol, glycerin)
15
Thickeners (e.g. magnesium silicate,
aluminum silicate, PEG derivatives)
15
Ethanol (alcohol, alcohol denat.)
11
Fibres (e.g. cellulose, nylon fibres)
10
Emollients (e.g. isopropyl myristate)
5
Additional ingredients (e.g. vitamins, plant extracts)
5
Preservatives, antimicrobials
2.5
Parfum
1
to
Aqua
152
100
Frame formulation Number:
7.23 - 2011
MASCARA - WATERPROOF
Ingredients
Maximum
levels (% w/w)
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
80
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
80
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
30
Resins, Film forming polymers (e.g.aluminum distearate,
PVP/hexadecene copolymer)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
25
Emulsifying agents (e.g. cera alba)
20
Bulking agents (e.g. talc, kaolin, zinc stearate)
15
Thickeners (e.g. stearalkonium hectorite)
12
Ethanol (alcohol, alcohol denat.)
10
Aqua
10
Humectants (e.g. propylene glycol, glycerin)
5
Additional ingredients (e.g. vitamins, plant extracts, silk powder)
5
Parfum
1
Antioxidants
1
Preservatives, antimicrobials
1
153
Frame formulation Number:
7.24 - 2011
MASCARA
(CAKE)
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g.TEA-stearate)
50
Waxes (e.g. ozokerite, cera alba, carnauba)
50
Colorants, colour additives (e.g. opacifying / pearlescent agents)
25
Film forming polymers (e.g. ammonium acrylates copolymer,
cellulose derivatives)
25
Thickeners (e.g. polyethylene derivatives, stearalkonium hectorite)
20
Aqua
20
Additional ingredients (e.g. vitamins, plant extracts)
5
Preservatives, antimicrobials
1
154
Frame formulation Number:
7.25 - 2011
BODY GLITTER
Ingredients
Maximum
levels (% w/w)
Colorants, colour additives (e.g. opacifying / pearlescent agents /
coloured aluminium foil, polyester film or laminates of both)
30
Ethanol (alcohol, alcohol denat.)
15
Humectants (e.g. propylene glycol)
10
Polymers, thickeners
(e.g. PVP/ VA copolymer with carbomer gel)
2
Triethanolamine
2
Preservatives, antimicrobials
1
Anionic / amphoteric / non-ionic surfactants
0.5
to
Aqua
155
100
Frame formulation Number:
8.1 - 2011
PERFUME
(EAU DE COLOGNE, EAU DE TOILETTE, EAU DE PARFUM, EXTRAIT DE PARFUM,
PARFUM)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
98
Parfum
40
Emollients, humectants (e.g. glycerin, propylene glycol)
10
Emulsifying agents (e.g. PEG-60, hydrogenated castor oil)
2
UV filters
2
Thickeners (e.g. carbomer)
2
Colorants
1
Additional ingredients (e.g. chelating agents)
1
Antioxidants
0.5
to
Aqua
156
100
Frame formulation Number:
8.2 - 2011
PERFUMED POWDER
(LOOSE OR PRESSED)
Ingredients
Maximum
levels (% w/w)
Mineral Bulking agents (e.g. talc, kaolin, magnesium/calcium carbonate)
99
Other Bulking agents (e.g. starch, nylon powder, sodium polyacrylate copolymer) 50
Colorants, colour additives (e.g. opacifying / pearlescent agents)
40
Parfum
25
Binding agents (e.g. vegetable and/or mineral oils, fatty acid esters)
10
Additional ingredients (e.g. UV filters, vitamins, antioxidants)
5
Preservatives, antimicrobials
1
157
Frame formulation Number:
8.3 - 2011
SOLID PERFUME (PASTE, WAXE, …)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
90
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Colorants, colour additives (e.g. opacifying / pearlescent agents)
50
Humectants (e.g. glycerin, propylene glycol)
30
Parfum
25
Bulking agents (e.g. silica, nylon powder, starch)
20
Thickeners (e.g. carbomer, hydroxyethylcellulose)
10
Film forming polymers (e.g. acrylic resin, ammonium acrylates copolymer)
5
Additional ingredients (e.g. vitamins, proteins, antioxidants)
5
Preservatives, antimicrobials
1
158
Frame formulation Number:
8.4 - 2011
PERFUMED SKIN OIL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Colorants, colour additives (e.g. opacifying / pearlescent agents)
40
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Parfum
25
Bulking agents (e.g. silica, nylon powder, starch)
15
Humectants (e.g. glycerin, propylene glycol)
10
Emulsifying agents, anionic / amphoteric / non-ionic surfactants (e.g. glyceryl stearate, PEG stearate)
Thickeners (e.g. dextrin palmitate)
5
Additional ingredients (e.g. antioxidants, plant extracts)
5
UV filters
2
Oils (vegetable and/or mineral)
to 100
159
5
Frame formulation Number:
9.1 - 2011
SUNSCREEN CREAM, LOTION
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
70
UV filters
40
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Humectants (e.g. glycerin, propylene glycol)
30
Ethanol (alcohol, alcohol denat.)
25
Emulsifying agents (e.g. glyceryl stearate, PEG-100 stearate)
10
Bulking agents (e.g. talc, silica, nylon powder)
10
Additional ingredients (e.g. bisabolol, vitamins)
6
Film forming polymers (e.g. PVP)
5
Thickeners (e.g. carbomer, xanthan gum)
5
Parfum
3
Preservatives, antimicrobials
2
Colorants
2
to
Aqua
160
100
Frame formulation Number:
9.2 - 2011
SUNSCREEN OIL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
70
UV filters
35
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
30
Film forming agents (e.g. PVP)
10
Additional ingredients (e.g. bisabolol)
6
Parfum
3
Colorants
2
Thickeners (e.g. bentonite)
1
Preservatives, antimicrobials
1
Oils (e.g. vegetable and/or mineral)
to
161
100
Frame formulation Number:
9.3 - 2011
SUNSCREEN STICK
Ingredients
Maximum
levels (% w/w)
Waxes, fats (e.g. theobroma cacao seed butter, polyethylene)
60
UV filters
35
Bulking agents (e.g. kaolin, nylon powder)
20
Emollients (e.g. cetearyl octanoate)
15
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
10
Additional ingredients (e.g. bisabolol, Colorants)
6
Antioxidants
1
Oils (e.g. vegetable and/or mineral)
to
162
100
Frame formulation Number:
9.4 - 2011
SUNSCREEN HYDROGEL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
60
UV filters
25
Humectants (e.g. sorbitol)
10
Additional ingredients (e.g. plant extracts, vitamins)
6
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
5
Emulsifying agents (e.g. cetearyl palmitate)
5
Polymers (e.g. carbomer)
5
Colorants
2
Parfum
1
Preservatives, antimicrobials
1
to
Aqua
163
100
9.5 - 2011
Frame formulation Number:
SUNSCREEN GEL (OIL BASED)
Ingredients
Maximum
levels (% w/w)
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
40
UV filters
25
Film forming polymers (e.g. PVP)
10
Thickeners (e.g. bentonite)
10
Additional ingredients (e.g. plant extracts, vitamins)
6
Colorants
2
Parfum
1
Preservatives, antimicrobials
2
Antioxidants
0.5
Oils (e.g. vegetable and/or mineral)
to
164
100
Frame formulation Number:
9.6 - 2011
SELF TAN - LOTION, CREAM
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
50
Ethanol (alcohol, alcohol denat.)
25
Emulsifying agents (e.g. glyceryl stearate, PEG stearate)
25
Humectants (e.g. glycerin, PEG)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone)
20
Anionic / amphoteric / non-ionic surfactants
(e.g. sodium cocoyl isethionate, sodium laureth sulfate)
20
UV filters
15
Dihydroxyacetone
10
Additional ingredients (e.g. plant extracts, vitamins, bisabolol)
6
Thickeners (e.g. carbomer)
5
Colorants
5
Preservatives, antimicrobials, chelating agents
2
Parfum
1
to
Aqua
165
100
Frame formulation Number:
9.7 - 2011
SELF TAN – LOTION, GEL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
60
UV Filters
15
Humectants (e.g. glycerin, propylene glycol)
10
Emulsifying agents (e.g. PEG-40, hydrogenated castor oil)
10
Additional ingredients (e.g. plant extracts, allantoin, vitamins)
6
Dihydroxyacetone
10
Thickeners (e.g. carbomer)
10
Colorants
5
Preservatives, antimicrobials
2
Parfum
0.5
Chelating agents
0.5
to
Aqua
166
100
Frame formulation Number:
10.1 - 2011
SHAMPOO – LIQUID, CREAM, PASTE
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium/ammonium/TEA lauryl sulfates,
sodium/ammonium/TEA laureth sulfates)
30
Amphoteric surfactants (e.g. betaine derivatives)
20
Non-ionic surfactants (e.g fatty alkanolamides)
15
Thickeners (e.g. propylene glycol, PEG)
10
Cationic surfactants ≥ C12 (e.g. stearamidopropyl dimethylamine,
behentrimonium chloride)
5
Hair conditioning agents (e.g. silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone,
amodimethicone), silanes (e.g. alcoxysilanes), cysteine derivatives, cellulose derivatives,
fatty acid esters)
15
Additional ingredients (e.g. UV filters, pearlescent agents,
opacifying agents)
10
Parfum
2
Preservatives, antimicrobials
1
Chelating agents (e.g. disodium EDTA)
0.5
to
Aqua
167
100
Frame formulation Number:
10.2 - 2011
SOAP SHAMPOO
Ingredients
Maximum
levels (% w/w)
Soap base (e.g. mixed sodium/potassium stearate and
sodium/potassium laurate)
70
Ethanol (alcohol, alcohol denat.)
30
Plant extracts
10
Parfum
2
Essential oils
1
168
Frame formulation Number:
10.3 - 2011
SHAMPOO PLUS CONDITIONER
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium laureth sulfate)
20
Non-ionic surfactants (e.g. alkyl polyglucosides)
20
Amphoteric surfactants (e.g. betaine derivatives)
20
Thickeners (e.g. long chain alcohols, stearyl alcohol)
10
Oils (e.g. vegetable and/or mineral) and waxes
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)10
Cationic surfactants ≥ C12 (e.g. behentrimonium chloride)
5
Cationic polymers (e.g. polyquaternium-11)
5
Humectants, emollients (e.g. glycerin)
5
Additional ingredients (e.g. UV filters, pearlescent agents)
5
Parfum
2
Preservatives, antimicrobials
1
Colorants
1
Chelating agents
0.5
to
Aqua
169
100
Frame formulation Number:
10.4 - 2011
HAIR CONDITIONER
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
20
Ethanol (alcohol, alcohol denat.)
15
Amphoteric surfactants (e.g. betaine derivatives)
15
Emulsifying agents (e.g. ceteth-30, cetyl alcohol)
10
Emollients, humectants (e.g. glycerin, propylene glycol)
10
Thickeners (e.g. carbomer, hydroxyethylcellulose)
10
Additional ingredients (e.g. proteins, chelating agents, pearlescent agents)
10
Cationic surfactants ≥ C12 (e.g. behentrimonium chloride)
5
Polymers, resins (e.g. polyquaternium-10, polyquaternium-11,
butyl ester of PVM/MA copolymer)
5
Parfum
3
UV filters
1
Preservatives, antimicrobials
1
Colorants
1
to
Aqua
170
100
10.5 - 2011
Frame formulation Number:
HAIR CONDITIONER (SILICONE BASED)
Ingredients
Maximum
levels (% w/w)
Aqua
20
Additional ingredients (e.g. UV filters, polymers)
10
Emulsifying agents (e.g. ethoxylated long chain alcohols)
6
Ethanol (alcohol, alcohol denat.)
5
Silicones including volatile silicones (e.g. cyclopentasiloxane,
dimethicone, amodimethicone)
171
to
100
Frame formulation Number:
10.6 - 2011
HAIR / SCALP CARE LOTION
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
60
Polymers (e.g. PVP)
10
Hair conditioning agents (e.g. cationic polymers, cellulose derivatives)
5
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
5
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
5
Humectants (e.g. glycerin)
5
Additional ingredients (e.g. vitamins, plant extracts, chelating agents,
UV filters, protein hydrolysates)
5
Emulsifying agents (e.g. ethoxylated long chain alcohols)
3
Parfum
3
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
172
100
Frame formulation Number:
10.7 - 2011
HAIR / SCALP BI-PHASE LOTION
Ingredients
Maximum
levels (% w/w)
Liquid paraffin and isoparaffin (e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
90
Ethanol (alcohol, alcohol denat.)
80
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
50
Isopropanol (isopropyl alcohol)
40
Polymers (e.g. PVP)
10
Hair conditioning agents (e.g. cationic copolymers, cellulose derivatives)
10
Humectants (e.g. propylene glycol)
10
Additional ingredients (e.g. UV filters, vitamins)
5
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated fatty acids)
3
Parfum
3
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
173
100
Frame formulation Number:
11.1 - 2011
HAIR COLORANT (TEMPORARY) - SHAMPOO
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. sodium/ammonium/TEA lauryl sulfate,
sodium/ammonium/TEA laureth sulfate)
30
Amphoteric surfactants (e.g. betaine derivatives)
20
Non-ionic surfactants (e.g fatty alkanolamides)
15
Thickeners (e.g. propylene glycol, PEG)
10
Cationic surfactants ≥ C12 (e.g. stearamidopropyl dimethylamine,
distearyldimonium chloride)
5
Hair conditioning agents (e.g. silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone,
amodimethicone), silanes (e.g. alcoxysilanes), cysteine derivatives, cellulose derivatives,
fatty acid esters)
15
Additional ingredients (e.g. UV filters, pearlescent agents,
opacifying agents)
10
Hair dyeing agents : Directs dyes (e.g. disperse violet 1, acid violet 43,
basic brown 17)
3
Preservatives, antimicrobials
1
Chelating agents (e.g. disodium EDTA)
0.5
Parfum
1
to
Aqua
174
100
Frame formulation Number:
11.2 - 2011
HAIR COLORANT (TEMPORARY) - FOAM, LOTION
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
60
Anionic / non-ionic / amphoteric surfactants (e.g. sodium laureth sulfate)
10
Foam boosting agents (e.g. cocamide MIPA)
5
Additional ingredients (e.g. plant extracts, pearlescent agents)
5
Polymers, resins (e.g. acrylates copolymer, carbomer)
4
Hair dyeing agents : Directs dyes (e.g. disperse violet 1, acid violet 43,
basic brown 17)
2
Preservatives, antimicrobials
1
Cationic surfactants ≥ C12 (e.g. cetrimonium chloride)
0.2
pH adjuster (e.g. citric acid, triethanolamine)
qs pH 3 - 9
to
Aqua
175
100
Frame formulation Number:
11.3 - 2011
HAIR COLORANT (TEMPORARY or SEMI-PERMANENT)
LIQUID, CREAM, FOAM
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
50
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
20
Emulsifying agents (e.g. laureth)
11
Silicones including volatile silicones (cyclopentasiloxane, dimethicone,
amodimethicone)
10
Anionic / non-ionic / amphoteric surfactants (e.g. ether of oleyl alcohol)
10
Hair dyeing agents : Direct dyes (e.g. HC red no.3, 4-amino-3-nitrophenol,
3-nitro-p-hydroxyethylaminophenol)
10
Solvents (e.g. propylene glycol, benzyl alcohol)
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride)
5
Additional ingredients (e.g. plant extracts, protein derivatives)
5
Hair conditioning agents (e.g. cationic polymers)
5
Resins (e.g. acrylates copolymer)
3
Thickeners (e.g. cellulose derivatives)
2
Parfum
1
Preservatives, antimicrobials
1
pH adjuster: (e.g. citric acid) or alkaline (e.g. ethanolamine,
sodium hydroxide, ammonium hydroxide)
qs pH 2 - 10
to
Aqua
176
100
Frame formulation Number:
11.4 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 1 : TWO COMPONENTS - COLORANT PART
To be mixed immediately prior to use with oxidative part (11.8-2011 or 11.9-2011)
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. ammonium laureth sulfate)
Non-ionic surfactants (e.g. laureth-12, deceth-3)
Amphoteric surfactants (e.g. betaine derivatives)
20
20
20
Emulsifying agents (e.g. ethoxylated long chain alcohols)
30
Soaps (e.g. ammonium hydroxide/ethanolamine oleates)
30
Solvents (e.g. propylene glycol, glycerin)
20
Thickeners (e.g. carbomer, long chain alcohols)
20
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
16
Hair dyeing agents:
Primary intermediates (e.g. p-phenylenediamines such as
p-phenylenediamine and toluene-2,5-diamine, p-aminophenols
such as p-aminophenol and 4-amino-m-cresol, heterocyclic
diamines such as 1-hydroxyethyl 4,5-diamino pyrazole sulfate)
6
Couplers (e.g. m-aminophenols such as m-aminophenol and
4-amino-2-hydroxytoluene, m-phenylenediamines such as
2-amino-4-hydroxyethylamino-anisole, resorcinols such as
resorcinol and 4-chlororesorcinol, pyridines such as
2,6-dihydroxy-3,4-dimethylpyridine, naphtols such as 1
,5-naphthalenediol)
6
Directs (e.g. HC red no. 3, 2-amino-6-chloro-4-nitrophenol,
basic yellow 87)
6
Alkaline agents (e.g. ammonium hydroxide*, ethanolamine)
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride, PEG-2 oleamine)
5
Cationic polymers (e.g. polyquaternium-6)
5
Additional ingredients (e.g. hair conditioning agents, pearlescent agents)
5
177
Antioxidants, reducing agents (e.g. ascorbic acid, sodium metabisulfite)
3
Parfum
2
Chelating agents (e.g. EDTA)
1
to
Aqua
pH value: 8 - 11.6
pH value of the mixture with oxidative part: 8 - 11.6
* maximum concentration of ammonium hydroxide permitted is 6 %
178
100
Frame formulation Number:
11.5 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 2 : TWO COMPONENTS - COLORANT PART WITH HIGH LEVEL OF OILS
To be mixed immediately prior to use with oxidative part (11.8-2011 or 11.9-2011)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral)
80
Anionic surfactants (e.g. ammonium laureth sulfate)
Non-ionic surfactants (e.g. laureth-12, deceth-3)
Amphoteric surfactants (e.g. betaine derivatives)
20
20
20
Emulsifying agents (e.g. ethoxylated long chain alcohols)
30
Soaps (e.g. ammonium hydroxide/ethanolamine oleates)
30
Solvents (e.g. propylene glycol, glycerin)
20
Thickeners (e.g. carbomer, long chain alcohols)
20
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
16
Hair dyeing agents:
Primary intermediates (e.g. p-phenylenediamines such as
p-phenylenediamine and toluene-2,5-diamine, p-aminophenols
such as p-aminophenol and 4-amino-m-cresol, heterocyclic
diamines such as 1-hydroxyethyl 4,5-diamino pyrazole sulfate)
6
Couplers (e.g. m-aminophenols such as m-aminophenol and
4-amino-2-hydroxytoluene, m-phenylenediamines such as
2-amino-4-hydroxyethylamino-anisole, resorcinols such as
resorcinol and 4-chlororesorcinol, pyridines such as
2,6-dihydroxy-3,4-dimethylpyridine, naphtols such as 1
,5-naphthalenediol)
6
Directs (e.g. HC red no. 3, 2-amino-6-chloro-4-nitrophenol,
basic yellow 87)
6
Alkaline agents
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride, PEG-2 oleamine)
179
5
Cationic polymers (e.g. polyquaternium-6)
5
Additional ingredients (e.g. hair conditioning agents, pearlescent agents)
5
Antioxidants (e.g. ascorbic acid)
3
Reducing agents
3
Parfum
2
Chelating agents (e.g. EDTA)
1
to
Aqua
pH value: 8 - 11.6
pH value of the mixture with oxidative part: 8 - 11.6
* maximum concentration of ammonium hydroxide permitted is 6 %
180
100
Frame formulation Number:
11.6 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 3 : THREE COMPONENTS - COLORANT PART - PART A
Part A (11.6-2011) and Part B (11.7-2011) to be mixed immediately prior to use with oxidative part (11.82011 or 11.9-2011)
Ingredients
Maximum
levels (% w/w)
Alkaline agents (e.g. ammonium hydroxide*, ethanolamine)
22
Solvents (e.g. propylene glycol, glycerin)
20
Hair dyeing agents:
Primary intermediates (e.g. p-phenylenediamines such as
p-phenylenediamine and toluene-2,5-diamine, p-aminophenols
such as p-aminophenol and 4-amino-m-cresol, heterocyclic
diamines such as 1-hydroxyethyl 4,5-diamino pyrazole sulfate)
10
Couplers (e.g. m-aminophenols such as m-aminophenol and
4-amino-2-hydroxytoluene, m-phenylenediamines such as
2-amino-4-hydroxyethylamino-anisole, resorcinols such as
resorcinol and 4-chlororesorcinol, pyridines such as
2,6-dihydroxy-3,4-dimethylpyridine, naphtols such as 1
,5-naphthalenediol)
10
Directs (e.g. HC red no. 3, 2-amino-6-chloro-4-nitrophenol,
basic yellow 87)
10
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
16
Thickeners (e.g. cellulose derivatives)
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride, PEG-2 oleamine)
5
Cationic polymers (e.g. polyquaternium-6)
5
Additional ingredients (e.g. hair conditioning agents, pearlescent agents)
5
Antioxidants, reducing agents (e.g. ascorbic acid, sodium metabisulfite)
3
Parfum
2
Chelating agents (e.g. EDTA)
1
to
Aqua
181
100
pH value: 8 - 11.6
pH value of the mixture Part A, Part B and oxidative part: 8 - 11.6
* maximum concentration of ammonium hydroxide permitted is 6 %
182
Frame formulation Number:
11.7 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 3 : THREE COMPONENTS - COLORANT PART - PART B
Part A (11.6-2011) and Part B (11.7-2011) to be mixed immediately prior to use with oxidative part (11.82011 or 11.9-2011)
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
20
Emollients, humectants (e.g. octyldodecanol)
20
Thickeners (e.g. bentonite, fatty esters)
20
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride, PEG-2 oleamine)
5
Additional ingredients (e.g. hair conditioning agents, antioxidants)
5
Parfum
2
Chelating agents (e.g. EDTA)
1
Oils (e.g.vegetable and/or mineral)
to 100
pH value of the mixture Part A, Part B and oxidative part: 8 - 11.6
183
Frame formulation Number:
11.8 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 1 : TWO OR THREE COMPONENTS - OXIDATIVE PART
To be mixed immediately prior to use with colourant part (11.4-2011 or 11.5-2011 or 11.6-2011 + 11.72011)
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
15
Hydrogen peroxide
12
Humectants (e.g. glycerin)
10
Parfum
2
Chelating agents
0.5
Hydrogen peroxide stabilising agents (e.g. sodium stannate)
0.5
pH adjuster (e.g. phosphoric acid)
qs pH 2 - 3
to
Aqua
pH value of the mixture with colourant part: 8 - 11.6
184
100
Frame formulation Number:
11.9 - 2011
HAIR COLORANT (PERMANENT, OXIDATIVE TYPE)
TYPE 2 : TWO OR THREE COMPONENTS - OXIDATIVE PART WITH HIGH LEVEL OF OILS
To be mixed immediately prior to use with colourant part (11.4-2011 or 11.5-2011 or 11.6-2011 + 11.72011)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral)
80
Thickeners (e.g. long chain alcohols, acrylates copolymer)
15
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
15
Hydrogen peroxide
12
Humectants (e.g. glycerin)
10
Additional ingredients (e.g. hair conditioning agents)
5
Parfum
2
Chelating agents
0.5
Hydrogen peroxide stabilising agents (e.g. sodium stannate)
0.5
pH adjuster (e.g. phosphoric acid)
qs pH 2 - 3
to
Aqua
pH value of the mixture with colourant part: 8 - 11.6
185
100
Frame formulation Number:
11.10 - 2011
DYE REMOVER (REDUCING TYPE) - PART A
To be mixed immediately prior to use with part B (11.11-2011)
Ingredients
Maximum
levels (% w/w)
Acid: citric acid
13
to
Aqua
pH value: 1.5 - 2
186
100
Frame formulation Number:
11.11 - 2011
DYE REMOVER (REDUCING TYPE) - PART B
To be mixed immediately prior to use with part A (11.10-2011)
Ingredients
Maximum
levels (% w/w)
Reducing agent (e.g. sodium hydroxymethane sulfonate)
20
to
Aqua
pH value: 10 - 11
187
100
Frame formulation Number:
11.12 - 2011
DYE REMOVER (OXIDATIVE TYPE) - PART A
to be mixed immediately prior to use with Dye remover (oxidative type) - Part B
Ingredients
Maximum
levels (% w/w)
Ammonium / sodium / potassium persulfate
70
Oils (e.g. vegetable and/or mineral)
50
Bulking agents (e.g. kaolin, magnesium stearate)
50
Alkaline agents including ammonium hydroxide liberators
(e.g. sodium/magnesium silicate, sodium carbonate, sodium metasilicate,
ammonium chloride)
45
Emulsifying agents (e.g. sodium lauryl sulfate)
15
Thickeners (e.g. guar gum)
5
Additional ingredients (e.g. colorants, chelating agents)
5
pH value of the mixture Part A + Part B: 9.5 - 11.5
188
Frame formulation Number:
11.13 - 2011
DYE REMOVER (OXIDATIVE TYPE) - PART B
to be mixed immediately prior to use with Dye remover (oxidative type) - Part A
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
15
Hydrogen peroxide
12
Humectants (e.g. glycerin)
10
Oils (e.g.vegetable and/or mineral)
5
Parfum
2
Chelating agents
0.5
Hydrogen peroxide stabilising agents (e.g. sodium stannate)
0.5
pH adjuster (e.g. phosphoric acid)
qs pH 2 - 3
to
Aqua
pH value of the mixture Part A + Part B: 9.5 - 11.5
189
100
Frame formulation Number:
11.14 - 2011
SKIN DYE-REMOVING CLEANSER
(REDUCING TYPE)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
30
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. sodium laureth sulfate, ethoxylated long chain alcohols)
20
Solvents (e.g. propylene glycol, PPG-2 butyl ether)
10
Humectants (e.g. glycerin)
10
Reducing agents (e.g. sodium sulfite)
5
Additional ingredients (e.g. bisabolol)
5
Parfum
2
to
Aqua
190
100
Frame formulation Number:
11.15 - 2011
HAIR BLEACH - POWDER
TO BE MIXED IMMEDIATELY PRIOR TO USE:
WITH AQUA FOR USE ALONE
OR WITH OXIDATIVE PART (11.17-2011 OR 11.18-2011)
OR WITH OXIDATIVE AND ALKALINE PARTS (11.17-2011 OR 11.18-2011 AND 11.19-2011)
Ingredients
Maximum
levels (% w/w)
Ammonium / sodium / potassium persulfate
70
Bulking agents (e.g. kaolin, magnesium stearate)
50
Alkaline agents including ammonium hydroxide liberators
(e.g. sodium carbonate, sodium/magnesium silicate,
sodium metasilicate, ammonium chloride)
Emulsifying agents (e.g. sodium lauryl sulfate)
45
15
Thickeners (e.g. guar gum)
5
Oils (e.g. vegetable and/or mineral)
5
Additional ingredients (e.g. Colorants, chelating agents)
5
pH value at 1 % powder in water: 10 - 11
pH value of the different mixtures: 9.5 - 11.5
191
Frame formulation Number:
11.16 - 2011
HAIR BLEACH - PASTE
TO BE MIXED IMMEDIATELY PRIOR TO USE
WITH OXIDATIVE PART (11.17-2011 OR 11.18-2011)
OR WITH OXIDATIVE AND ALKALINE PARTS (11.17-2011 OR 11.18-2011 AND 11.19-2011)
Ingredients
Maximum
levels (% w/w)
Ammonium / sodium / potassium persulfate
70
Oils (e.g. vegetable and/or mineral)
50
Bulking agents (e.g. kaolin, magnesium stearate)
50
Alkaline agents including ammonium hydroxide liberators
(e.g. sodium/magnesium silicate, sodium carbonate,
sodium metasilicate, ammonium chloride)
45
Emulsifying agents (e.g. sodium lauryl sulfate)
15
Thickeners (e.g. guar gum)
5
Additional ingredients (e.g. Colorants, chelating agents)
5
pH value of the different mixtures: 9.5 - 11.5
192
Frame formulation Number:
11.17 - 2011
HAIR BLEACH - OXIDATIVE PART - TYPE 1
TO BE MIXED IMMEDIATELY PRIOR TO USE WITH :
- HAIR BLEACH POWDER (11.15-2011) OR HAIR BLEACH POWDER + ALKALINE PART
(11.15-2011 + 11.19-2011)
- HAIR BLEACH PASTE (11.16-2011) OR HAIR BLEACH PASTE + ALKALINE PART(11.162011 + 11.19-2011)
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
15
Hydrogen peroxide
12
Humectants (e.g. glycerin)
10
Oils (e.g.vegetable and/or mineral)
5
Parfum
2
Chelating agents
0.5
Hydrogen peroxide stabilising agents (e.g. sodium stannate)
0.5
pH adjuster (e.g. phosphoric acid)
qs pH 2 - 3
to
Aqua
pH value of the different mixtures: 9.5 - 11.5
193
100
Frame formulation Number:
11.18 - 2011
HAIR BLEACH - OXIDATIVE PART - TYPE 2
TO BE MIXED IMMEDIATELY PRIOR TO USE WITH :
- HAIR BLEACH POWDER (11.15-2011) OR HAIR BLEACH POWDER + ALKALINE PART
(11.15-2011 + 11.19-2011)
- HAIR BLEACH PASTE (11.16-2011) OR HAIR BLEACH PASTE + ALKALINE PART (11.162011 + 11.19-2011)
Ingredients
Maximum
levels (% w/w)
Oils (e.g.vegetable and/or mineral)
80
Thickeners (e.g. long chain alcohols, acrylates copolymer)
15
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
15
Hydrogen peroxide
12
Humectants (e.g. glycerin)
10
Additional ingredients (e.g. hair conditioning agents)
5
Parfum
2
Chelating agents
0.5
Hydrogen peroxide stabilising agents (e.g. sodium stannate)
0.5
pH adjuster (e.g. phosphoric acid)
qs pH 2 - 3
to
Aqua
pH value of the different mixtures: 9.5 - 11.5
194
100
Frame formulation Number:
11.19 - 2011
HAIR BLEACH - ALKALINE PART
TO BE MIXED IMMEDIATELY PRIOR TO USE WITH :
- HAIR BLEACH POWDER (11.15-2011) + OXIDATIVE PART (11.17-2011 OR 11.18-2011)
- HAIR BLEACH PASTE (11.16-2011) + OXIDATIVE PART (11.17-2011 OR 11.18-2011)
Ingredients
Maximum
levels (% w/w)
Anionic surfactants (e.g. ammonium laureth sulfate)
20
Non-ionic surfactants (e.g. laureth-12, deceth-3)
20
Amphoteric surfactants (e.g. betaine derivatives)
20
Emulsifying agents (e.g. ethoxylated long chain alcohols)
30
Soaps (e.g. ammonium hydroxide/ethanolamine oleates)
30
Solvents (e.g. propylene glycol, glycerin)
20
Thickeners (e.g. carbomer, long chain alcohols)
20
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
16
Alkaline agents (e.g. ammonium hydroxide*, ethanolamine)
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride, PEG-2 oleamine)
5
Cationic polymers (e.g. polyquaternium-6)
5
Additional ingredients (e.g. hair conditioning agents, pearlescent agents)
5
Parfum
2
Chelating agents (e.g. EDTA)
1
to
Aqua
pH value: 8 - 11.6
pH value of the different mixtures: 9.5 - 11.5
* maximum concentration of ammonium hydroxide permitted is 6 %
195
100
Frame formulation Number:
11.20 - 2011
HAIR COLOUR RESTORER
Ingredients
Maximum
levels (% w/w)
Waxes (e.g. petrolatum, cetearyl alcohol)
35
Oils (e.g. vegetable and/or mineral)
20
Humectants (e.g. sorbitol, glycerin)
10
Emulsifying agents (e.g. ceteth-12, sorbitan sesquioleate)
10
Sulfur
3
Parfum
1
to
Aqua
196
100
Frame formulation Number:
12.1 - 2011
HAIR STYLING CREAM / PASTE (GUM, POMADE, PASTE, WAX, …)
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral) and waxes
60
Humectants (e.g. propylene glycol, glycerin)
50
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated fatty acids)
30
Hair conditioning agents (e.g. cellulose derivatives, cationic polymers)
20
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)20
Hair texturising agents (e.g. kaolin, starch)
20
Resins, polymers (e.g. PVP/VA copolymer, acrylates copolymer) /
Neutralising agent (e.g. aminomethyl propanol)
10
Additional ingredients (e.g. UV filters, vitamins, Colorants,
chelating agents)
5
Parfum
1
Preservatives, antimicrobials
1
to
Aqua
197
100
Frame formulation Number:
12.2 - 2011
HAIR SHINE WAX OR BRILLIANTINE
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral) and waxes
99
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
99
Emulsifying agents (e.g. ethoxylated fatty acids)
3
Parfum
3
Additional ingredients (e.g. UV filters, vitamins )
2
Preservatives, antimicrobials, antioxidants
1
Colorants
1
198
Frame formulation Number:
12.3 - 2011
HAIR STYLING LOTION
Ingredients
Maximum
levels (% w/w)
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
90
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
80
Hair conditioning agents (e.g. cationic polymers, cellulose derivatives)
20
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
15
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
15
Resins, polymers (e.g. polyvinyl acetate, PVP) / Neutralising agent
(e.g. aminomethyl propanol)
10
Humectants (e.g. glycerin)
5
Additional ingredients (e.g. vitamins , plant extracts, chelating agents,
UV filters, protein hydrolysates)
5
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
3
Parfum
3
Preservatives, antimicrobials
2
Colorants
1
to
Aqua
199
100
Frame formulation Number:
12.4 - 2011
SETTING LOTION
(INCLUDING COLOURED SETTING LOTIONS)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Isopropanol (isopropyl alcohol)
40
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
10
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
10
Resins, polymers (e.g. polyvinyl acetate, PVP)
5
Parfum
2
Humectants (e.g. propylene glycol)
2
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated fatty acids)
2
Neutralising agents (e.g. aminomethyl propanol)
2
Additional ingredients (e.g. UV filters, vitamins )
2
Preservatives, antimicrobials
2
Cationic surfactants ≥ C12 (e.g. cetrimonium chloride)
1
Cationic polymers (e.g. polyquaternium-11, polyquaternium-28)
1
Isopropyl esters of fatty acids
1
Hair dyeing agents, Colorants
1
to
Aqua
200
100
Frame formulation Number:
12.5 - 2011
HAIR SHINE / STYLING GEL
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
25
Humectants (e.g. glycerin, propylene glycol)
20
Resins, polymers (e.g. PVP, polyquaternium-11, VA/crotonates
copolymer, butyl ester of PVM/MA copolymer) / Neutralising agent
(e.g. aminomethyl propanol, triethanolamine)
15
Colorants, colour additives (e.g. opacifying / pearlescent agents)
15
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated fatty acids)
5
Isopropanol (isopropyl alcohol) (can be present in resins)
5
Thickeners (e.g. carbomer)
2
Additional ingredients (e.g. UV filters, vitamins )
2
Preservatives, antimicrobials, chelating agents
1.5
Parfum
1
to
Aqua
201
100
Frame formulation Number:
12.6 - 2011
HAIR FOAM
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
30
Propellants (e.g. hydrocarbons, dimethyl ether, compressed gas)
30
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
25
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
25
Film forming agents, polymers, resins (e.g. polyvinyl acetate, PVP,
polyquaternium-4) and neutralising agent (e.g. aminomethyl propanol)
10
Humectants (e.g. glycerin)
10
Polyglycol ethers
5
Cationic surfactants ≥ C12 (e.g. cetrimonium chloride)
5
Non-ionic surfactants (e.g. oleth-20)
5
Hair texturizing agents (e.g. kaolin, starch)
3
Plasticisers (e.g. triacetin)
2
Preservatives, antimicrobials
2
Additional ingredients (e.g. UV filters, vitamins )
2
Colorants
1
Parfum
0.2
to
Aqua
202
100
Frame formulation Number:
12.7 - 2011
HAIR SPRAY - AEROSOL
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
95
Propellants (e.g. dimethyl ether, hydrocarbons)
90
Solvents (e.g. volatile silicones (e.g. cyclopentasiloxane, dimethicone),
liquid paraffin and isoparaffin (e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane))
40
Humectants (e.g. glycerin, propylene glycol)
30
Resins, polymers (e.g. PVP/VA copolymer, VA/crotonates copolymer,
butyl ester of PVM/MA copolymer) / Neutralising agent
(e.g. aminomethyl propanol) / Alkoxylated glucose derivatives
8.5
Additional ingredients (e.g. UV filters, vitamins )
2
Plasticisers (e.g. polyglycol ethers, alcohol esters)
2
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
203
100
Frame formulation Number:
12.8 - 2011
HAIR SPRAY - PUMP SPRAY
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
95
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
50
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
40
Humectants (e.g. glycerin, propylene glycol)
20
Resins, polymers (e.g. PVP/VA copolymer, VA/crotonates copolymer,
butyl ester of PVM/MA copolymer) / Neutralising agent
(e.g. aminomethyl propanol) / Alkoxylated glucose derivatives
8
Plasticisers (e.g. polyglycol ethers, alcohol esters)
2
Additional ingredients (e.g. UV filters, vitamins )
2
Hair texturizing agents (e.g. silica)
1
Preservatives, antimicrobials
1
Parfum
1
to
Aqua
204
100
Frame formulation Number:
12.9 - 2011
SHINE HAIR SPRAY - AEROSOL
Ingredients
Maximum
levels (% w/w)
Propellants (e.g. dimethyl ether, hydrocarbons)
90
Oils (e.g. vegetable and/or mineral), waxes and fats
(e.g. long chain alcohols)
50
Silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone, amodimethicone), silanes (e.g.
alcoxysilanes)
50
Liquid paraffin and isoparaffin(e.g. branched-chain
isoparaffin (C11-C16), isododecane, isohexadecane)
40
Resins, polymers (e.g. PVP/VA copolymer, VA/crotonates copolymer,
butyl ester of PVM/MA copolymer) / Neutralising agent
(e.g. aminomethyl propanol) / Alkoxylated glucose derivatives
10
Additional ingredients (e.g. UV filters, vitamins , Colorants)
5
Preservatives, antimicrobials
1
Parfum
1
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
205
to
100
Frame formulation Number:
12.10 - 2011
PERMANENT WAVE LOTION - SINGLE COMPONENT BASED ON REDUCING AGENTS
Ingredients
Maximum
levels (% w/w)
Reducing agents, e.g.:
- ammonium thioglycolate
- ammonium thiolactate
- cysteine HCl
- sodium metabisulfite
- sodium sulfite
13
12
10
8
8
Alkaline agents (e.g. ammonium hydroxide, ethanolamine,
ammonium bicarbonate)
8
Diammonium dithiodiglycolate
6
Silicones (e.g. amodimethicone), silanes (e.g. alcoxysilanes)
5
Additional ingredients (e.g. Thickeners, emulsifying agents)
3
Anionic / non-ionic / amphoteric surfactants (e.g. cocamidopropyl betaine)
3
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride)
3
Anionic / cationic polymers (e.g. acrylates copolymer,
polyquaternium-11)
2.5
Hair conditioning agents (e.g. proteins)
2.5
Parfum
1
Colorants
1
Opacifying agents (e.g. styrene/PVP copolymer)
0.5
Chelating agents
0.3
to
Aqua
pH value: 7 - 9.5
206
100
Frame formulation Number:
12.13 - 2011
PERMANENT WAVE LOTION - TWO-COMPONENTS – BASED ON HYDROGENPEROXIDE
AND REDUCING AGENTS- PART A
To be mixed prior to use with part B (12.14-2011), the mixing of parts A and B is exothermic
Ingredients
Maximum
levels (% w/w)
12
Hydrogen peroxide
Non-ionic surfactants
5
Hair conditioning agents (e.g. proteins)
1
Stabilising agents
0.5
to
Aqua
pH value: 2.5 - 3.5
pH value of the ready-to-use mixture (parts A and B): 7 - 9.5
207
100
Frame formulation Number:
12.14 - 2011
PERMANENT WAVE LOTION - TWO COMPONENTS – BASED ON HYDROGEN PEROXIDE
AND REDUCING AGENTS - PART B
To be mixed prior to use with part A (12.13-2011), the mixing of parts A and B is exothermic
Ingredients
Maximum
levels (% w/w)
Reducing agent: Ammonium thioglycolate
20 *
Alkaline agents (e.g. ammonium hydroxide, ethanolamine,
ammonium bicarbonate)
8
Anionic / non-ionic / amphoteric surfactants (e.g. betaine derivatives )
3
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride)
3
Parfum
1
Colorants
1
Opacifying agents
0.5
to
Aqua
* before exothermic reaction with hydrogen peroxide
pH value: 7 - 9.5
pH value of the ready-to-use mixture (parts A and B): 7 - 9.5
208
100
Frame formulation Number:
12.15 - 2011
PERMANENT WAVE LOTION - TWO COMPONENTS – BASED ON REDUCING AGENTS PART A
To be mixed prior to use with part B (12.16-2011)
Ingredients
Maximum
levels (% w/w)
Reducing agent : Thioglycolate ester(e.g. glyceryl thioglycolate)
99
Glycerin
50
pH value of the ready-to-use mixture (parts A and B): 6.5 - 9
209
Frame formulation Number:
12.16 - 2011
PERMANENT WAVE LOTION - TWO COMPONENTS – BASED ON REDUCING AGENTS –
PART B
To be mixed prior to use with part A (12.15-2011)
Ingredients
Maximum
levels (% w/w)
Reducing agents, e.g.:
- ammonium thioglycolate
- cysteine HCl
- ethanolamine thioglycolate
5
10
1
Anionic / non-ionic / amphoteric surfactants (e.g. betaine derivatives)
10
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride)
5
Alkaline agents (e.g. ammonium hydroxide, ethanolamine,
ammonium bicarbonate)
5
Silicones (e.g. amodimethicone), silanes (e.g. alcoxysilanes)
5
Diammonium dithiodiglycolate
4
Hair conditioning agents (e.g. proteins, polymers)
2
Opacifying agents
1
Parfum
1
to
Aqua
pH value: 8 - 9.5
pH value of the ready-to-use mixture (parts A and B): 6.5 - 9
210
100
Frame formulation Number:
12.17 - 2011
PERMANENT WAVE NEUTRALISER - LIQUID, CREAM
Ingredients
Maximum
levels (% w/w)
Emulsifying agents, anionic / amphoteric / non-ionic surfactants,
wetting agents (e.g. cetearyl alcohol)
8
Hydrogen peroxide
2-6
Thickeners (e.g. carbomer)
2
Hair conditioning agents (e.g. silicones including volatile silicones (e.g. cyclopentasiloxane, dimethicone,
amodimethicone), silanes (e.g. alcoxysilanes), polyquaternium-6)
2
Parfum
1
Colorants
1
Hydrogen peroxide stabilising agents
(e.g. sodium stannate, oxyquinoline sulfate)
0.5
Opacifying agents (e.g. styrene/PVP copolymer)
0.5
Preservatives, antimicrobials
0.2
Chelating agents
0.2
pH adjuster (e.g. citric acid)
qs pH 2.5 - 3.5
to
Aqua
211
100
Frame formulation Number:
12.18 - 2011
HAIR STRAIGHTENER (RELAXER) - TYPE 1
Cream type based on lye
Ingredients
Maximum
levels (% w/w)
Oils (e.g. vegetable and/or mineral) and waxes
80
Emollients, humectants (e.g. lanolin, cholesterol)
30
Anionic / non-ionic / amphoteric surfactants (e.g. polysorbate 60)
15
Emulsifying agents (e.g. cetyl alcohol, stearyl alcohol, oleyl alcohol
and their ethoxylates)
15
Additional ingredients (e.g. plant extracts)
5
Straightening agents (e.g. sodium hydroxide, potassium hydroxide,
lithium hydroxide, calcium hydroxide)
4.5
Hair conditioning agents (e.g. proteins, polymers)
2
Parfum
1
to
Aqua
pH value: 11.0 - 13.5
212
100
Frame formulation Number:
12.19 - 2011
HAIR STRAIGHTENER (RELAXER) - TYPE 2 - PART A
Part A (No lye type cream base) to be mixed prior to use with part B (activator) (12.20-2011)
Ingredients
Maximum
levels (% w/w)
Straightening agents, e.g.
- calcium hydroxide
- potassium citrate
10
10
*
Oils (e.g. vegetable and/or mineral), waxes and fats
80
Humectants, emollients (e.g. lanolin, cholesterol)
30
Anionic / non-ionic / amphoteric surfactants (e.g. betaine derivatives)
10
Emulsifying agents (e.g. long chain alcohols and their ethoxylates)
10
Hair conditioning agents (e.g. proteins, polymers)
5
Additional ingredients (e.g. plant extracts)
5
Parfum
1
to
Aqua
100
* the mix with part B activator generates an alkaline mix of up to 5 % alkali calculated as calcium hydroxide.
pH value: 11 - 13
pH value of the mixture (part A cream base and part B activator): 11 - 13.5
213
Frame formulation Number:
12.20 - 2011
HAIR STRAIGHTENER (RELAXER) - TYPE 2 - PART B
Part B (Activator) to be mixed prior to use with part A (cream base) (12.19-2011)
Ingredients
Maximum
levels (% w/w)
Straightening agents, e.g.
- calcium hydroxide
- guanidine carbonate
40
30
Polymers, resins, hair conditioning agents
5
Additional ingredients (e.g. humectants such as sorbitol)
5
Parfum
1
Colorants
1
to
Aqua
pH value: 10 - 13
pH value of the mixture (part A cream and part B activator): 11 - 13.5
214
100
Frame formulation Number:
12.21 - 2011
HAIR STRAIGHTENER (RELAXER) - TYPE 3
Ingredients
Maximum
levels (% w/w)
Emulsifying agents (e.g. long chain alcohols, ethoxylated long
chain alcohols)
15
Straightening agents, e.g.
- ammonium thioglycolate
- ammonium thiolactate
- cysteine HCl
- ethanolamine thioglycolate
13
12
10
1
Alkaline agents (e.g. ammonium hydroxide, ethanolamine,
ammonium bicarbonate)
8
Diammonium dithiodiglycolate
6
Anionic / non-ionic / amphoteric surfactants (e.g. cocamidopropyl betaine)
5
Cationic surfactants ≥ C12 (e.g. dicetyldimonium chloride)
5
Silicones (e.g. amodimethicone), silanes (e.g. alcoxysilanes)
5
Additional ingredients (e.g. plant extracts, Thickeners)
5
Anionic / cationic polymers, hair conditioning agents
(e.g. acrylates copolymer, polyquaternium-11)
2.5
Parfum
1
Colorants
1
Chelating agents
0.3
to
Aqua
pH value: 7 - 9.5
215
100
Frame formulation Number:
13.1 - 2011
NAIL VARNISH
Ingredients
Maximum
levels (% w/w)
Ethanol and/or isopropanol (alcohol, alcohol denat., isopropyl alcohol)
90
Solvents (e.g. ethyl acetate, butyl acetate, diacetone alcohol,
PPG-2 butyl ether)
90
Resins, polymers (e.g. nitrocellulose, acrylates copolymer,
phthalic anhydride/butyl benzoic acid/propylene glycol copolymer)
50
Plasticisers (e.g. triethyl citrate)
15
Colorants, colour additives (e.g. opacifying / pearlescent agents)
15
Additional ingredients (e.g. vitamins , proteins, plant extracts)
10
Thickeners (e.g. stearalkonium hectorite, silica)
5
UV filters
2
216
Frame formulation Number:
13.2 - 2011
NAIL WHITE PENCIL
Ingredients
Maximum
levels (% w/w)
Bulking agents (e.g. kaolin, magnesium carbonate, chalk)
80
Colorants, colour additives (e.g. opacifying agents / titanium dioxide)
30
Binding agents (e.g. waxes, stearic acid)
25
Thickeners (e.g. bentonite)
5
217
Frame formulation Number:
14.1 - 2011
NAIL CONDITIONER (OIL BASED)
Ingredients
Maximum
levels (% w/w)
Unsaturated fatty acids, proteins, vitamins
10
Colorants
1
Antioxidants, preservatives, antimicrobials
0.5
Parfum
0.5
Vegetable oils (e.g. sesame oil)
to
218
100
Frame formulation Number:
16.1 - 2011
TOOTHPASTE
Ingredients
Maximum
levels (% w/w)
Sorbitol
70
Abrasives (e.g. dicalcium phosphate dihydrate and/or alumina and/or
calcium carbonate and/or silica and silicates)
55
Glycerin
40
Insoluble metaphosphate (IMP)
35
Ethanol (alcohol, alcohol denat.)
30
Sodium pyrophosphate, potassium pyrophosphate
15
PEG, PPG
10
Oral care-protecting agents (e.g. strontium chloride)
10
Anionic surfactants (e.g. sodium lauryl sulfate)
6
Thickeners (e.g. cellulose derivatives)
5
Additional ingredients (e.g. pH stabilisers such as sodium/potassium
phosphate, vitamins)
5
Flavour (mostly essential oils, e.g. mint)
3
Titanium dioxide
2
Colorants
1
Preservatives,
1
Oral care-antiplaque (e.g. zinc citrate)
2
Oral care-sweetening agents (e.g. aspartame)
0.5
Calcium glycerophosphate
0.15
Fluoride compounds (calculated as Fluorine)
0.15 *
to
Aqua
219
100
*
actual weight present will depend on M.Wt. of fluorine donor,
e.g. 0.15% fluorine = 1.14 % MFP (monofluorophosphate)
or 0.333 % NaF (sodium fluoride)
220
Frame formulation Number:
17.1 - 2011
MOUTHWASH
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
25
Humectants (e.g. sorbitol)
20
Additional ingredients (e.g. vitamins )
5
Flavour (mostly essential oils e.g. mint)
3
Anionic / amphoteric / non-ionic surfactants
(e.g. sodium lauryl sulfate, polysorbate)
3
Colorants
3
Emulsifying agents (e.g. PEG-60, hydrogenated castor oil)
1
Preservatives, antimicrobials
1
Oral care-deodorant (e.g. zinc chloride)
0.5
Thickeners (e.g. cellulose derivatives)
0.5
Oral care-sweetening agents (e.g. sodium saccharin)
0.2
Fluoride compounds (calculated as Fluorine)
0.15 *
to
Aqua
*
actual weight present will depend on M.Wt. of fluorine donor,
e.g. 0.15% fluorine = 1.14 % MFP (monofluorophosphate)
or 0.333 % NaF (sodium fluoride)
221
100
Frame formulation Number:
17.2 - 2011
MOUTHWASH (CONCENTRATE)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
80
Humectants (e.g. glycerin, propylene glycol)
80
Flavour (mostly essential oils, e.g. mint)
7.5
Additional ingredients (e.g. vitamins )
5
Colorants
3
Emulsifying agents, anionic / amphoteric / non-ionic surfactants
(e.g. ethoxylated long chain alcohols)
2
Preservatives, antimicrobials
1
Oral care-sweetening agents (e.g. sodium saccharin)
0.2
to
Aqua
222
100
Frame formulation Number:
17.3 - 2011
BREATH SPRAY (PUMP SPRAY)
Ingredients
Maximum
levels (% w/w)
Ethanol (alcohol, alcohol denat.)
99
Humectants (e.g. propylene glycol, glycerin)
30
Flavour (mostly essential oils, e.g. mint)
2
Oral care-deodorant (e.g. zinc chloride)
0.5
Preservatives, antimicrobials
0.2
Oral care-sweetening agents (e.g. sodium saccharin)
0.2
to
Aqua
223
100
ANNEX III: Categories of cosmetic products
Level 1
Skin products
Level 2
Level 3
Skin care products
Face care products other than face mask
Face mask
Eye contour products
Lip care products
Hand care products
Foot care products
Body care products
External intimate care products
Chemical exfoliation products
Mechanical exfoliation products
Skin lightening products
Other skin care products
Skin cleansing products
Soap products
Bath / shower products
Make-up remover products
External Intimate hygiene products
Other skin cleansing products
Body hair removal products
Chemical depilatories
Physical epilation products
Other body hair removal products
Bleach for body hair products
224
Bleach for body hair
Correction of body odour and/or perspiration
Products with antiperspirant activity
Products without antiperspirant activity
Shaving and pre- / after- shaving products
Shaving products
Pre- / after-shaving products
Other shaving and pre- / after- shaving products
Make-up products
Foundation
Concealer
Other face make-up products
Mascara
Eye shadow
Eye pencil
Eye liner
Other eye make-up products
Lip stick
Lipstick sealer
Other lip make-up products
Body or face paint , including "carneval make-up"
Other make-up products
Perfumes
Hydroalcoholic perfumes
Non hydroalcoholic perfumes
Sun and self-tanning products
Before and after sun products
Sun protection products
Self-tanning products
Other sun and self-tanning products
Other skin products
225
Other skin products
Hair and scalp products
Hair and scalp care and cleansing products
Shampoo
Hair conditioner
Scalp and hair roots care products
Antidandruff products
Antihairloss products
Other hair and scalp care and cleansing products
Hair colouring products
Oxidative hair colour products
Non-oxidative hair colour products
Hair bleaching and dye remover products
Other hair colouring products
Hair styling products
Products for temporary hair styling
Permanent wave products
Hair relaxer / straightener products
Other hair styling products
Other hair and scalp products
Hair sun protection products
Other hair and scalp products
Nail and cuticle products
Nail varnish and remover products
Nail varnish / Nail make-up
Nail varnish remover
Nail varnish thinner
Nail bleach
Other nail varnish and remover products
Nail care / nail hardener products
Nail care products
Nail hardener
Other nail care / nail hardener products
Nail glue remover products
226
Nail glue remover
Other nail and cuticle products
Cuticle remover / softener
Nail sculpting products
Other nail and cuticle products
Oral hygiene products
Tooth care products
Toothpaste
Tooth cleansing powder / salt
Other tooth care products
Mouth wash / breath spray
Mouth wash
Breath spray
Other mouth wash / breath spray products
Tooth whiteners
Tooth whiteners
Other oral hygiene products
Other oral hygiene products
227