Download Manual

User Manual
Ø
Ø
Preview LP: allows you set if the license plate number appear on Live screen or not.
Record GPS: allows you set if the GPS info display on the recorded data or not.
Ø
Ø
Ø
Preview GPS: allows you set if the GPS info appears on Live screen
or not.
License Plate: you can set the car license plate here and the model
supports the plate with Chinese character that the DVR located.
Delay power off: you can set how long DVR is delayed power off
after car ignition is off. Options include <off, 1min, 5min, 10min,
20min, 30min, 40min, 50 min and 60min>.
Picture5-21
5.2.5.5 PTZ Setup
Enter into [Main menuàDeviceà PTZ Setup] to select the
channel you wish to control and set PTZ protocol (Pelco-D or Pelco-P),
Baud Rate (9600), Stop bit (1), Parity Check (None) and Address Code
respectively. Please make sure the above mentioned channel settings
must match the settings of the PTZ camera.
For PTZ camera connection method, please refer to Rear Panel
configuration.
Picture5-22
5.2.6 System Setup
You can set Date/Time, User permission, Video, Language,
System info and System Maintenance.
Picture5-23
5.2.6.1 Time Setup
In the [System Setup] screen, highlight and click [Date/Time] option to enter into the below window.
Picture5-23
1. You can check and setup current date/time and time
related properties, also modify system display time and
date/time display format and setup DST status and mode etc.
2. Click [APPLY] button to save and exit the above setting.
Picture5-24
20