1
Download Quick Start Guide
Transcript
50 — AC Drive Control (Continued) Modbus 0300H 0301H Groups 50.01 50.02 Parameter Description Range Source of LOCAL/HAND 04 Frequency Master Frequency determined by RS-485 (Frequency retained) 05 Master Frequency determined by RS-485 (Frequency not retained) Master Frequency determined by digital keypad on the drive. Master Frequency determined by 0 – 10V on terminal AI1. Master Frequency determined by 4 – 20 mA on terminal AI2. Master Frequency determined by -10 – 10V on terminal AI3. Master Frequency determined by RS-485 (Frequency retained) Master Frequency determined by RS-485 (Frequency not retained) Operating commands determined by the Digital Keypad. Operating commands determined by the External Control Terminals. Keypad STOP key is enabled. Operating commands determined by the External Control Terminals. Keypad STOP key is not enabled. Operating commands determined by the RS-485 communication interface. Keypad STOP key is enabled. Operating commands determined by the RS-485 communication interface. Keypad STOP key is not enabled. Operating commands determined by the Digital Keypad. Operating commands determined by the External Control Terminals. Keypad STOP key is enabled. Operating commands determined by the External Control Terminals. Keypad STOP key is not enabled. Operating commands determined by the RS-485 communication interface. Keypad STOP key is enabled. Operating commands determined by the RS-485 communication interface. Keypad STOP key is not enabled. Disable Source of REMOTE/ AUTO Frequency 00 01 02 03 04 05 0302H 50.03 Source of LOCAL/HAND 00 Operation Command 01 02 0302H 50.03 Source of LOCAL/HAND 03 Operation Command 04 0303H 50.04 Source of REMOTE/ AUTO Operation Command 00 01 02 03 04 0304H 50.05 0305H 0306H 50.06 50.07 0307H 50.08 MN04000002E Dual Frequency Input Mode Trim Reference Keypad Frequency Setting Stop Method 00 01 50.01 + 50.02 02 50.01 – 50.02 03 50.02 trims 50.01 (Reference) 0.00 to 100.00% 50.00 to 400.00 Hz 00 01 02 03 STOP = Ramp, EF = Coast STOP = Coast, EF = Coast STOP = Ramp, EF = Ramp STOP = Coast, EF = Ramp 10 Default User Settings 00 01 00 00 01 00 0.00 60.00 00 June 2006
