Download ORIGINAL OPERATING MANUAL GHOST E

GHOST EPAC
15.1
Gear shift, drive
Malfunction
Possible cause(s)
Remedy
Gears do not change or do not
change smoothly
Shift lever not actuated correctly
Actuate the lever again
Shift mechanism maladjusted
Contact your specialist bicycle
dealer.
·
In the case of steep
inclinations, excessive
pressure on the pedal
Repeat the gear shifting
procedureonflatterrain.
·
and/or pedalling movement
too slow
Drive blocks during or after gear
shifting
Chain jamming
Changing gear while stationary:
·
Lift the rear wheel.
·
Turn the crank in the drive
direction until the desired gear
is engaged.
·
Leave the EPAC where it is.
·
Turn off the standby mode in
accordance with section ‎10.3,
Switching off the electric drive
·
Actuate the gear lever in the
opposite direction.
·
Lift the rear wheel.
·
If this is possible without
force:
turn the crank in the opposite
direction to the drive.
NOTE:
Under no circumstances should
you apply force if the crank
cannot be easily turned .
You should contact your
specialist workshop for bicycles
immediately.
Unusual noise such as cracking,
loud grinding and/or banging
Drive/gearing components
damaged
Irregular resistance during the
pedal movements
Drive/gearing components
damaged
70
Contact your specialist bicycle
dealer immediately.