Download - OMEGA Engineering

Step 1：Log in to the OME-PET-7026 web interface
Enter the IP address of the OME-PET-7026 in the browser, and then enter
your user name and password to log in to the OME-PET-7026 web interface.
Refer to chapter 3, “Web Applications”, for more details.
Step 2：Configure the AO type for the OME-PET-7026
Click the “Module I/O Settings” option in the configuration section of the
Main Menu to open the “analog Output Settings” page and set the
voltage/current range to “-5 V - 5V”, and then click the “Submit” button.
(Follow the same procedure to set the AI range for the OME-ET-7017)
1
2
Tips & Warnings
The settings for both the AO type for the OME-PET-7026 and the AI type for
the OME-ET-7017 must be the same. In this example, they are both “-5 V ~ 5
V”.
Page: 79