Download Lechsys User Manual

TECHNICAL INFORMATION FOR LECHSYS
COMPATIBILITY BETWEEN BASE COLOURS AND BINDERS
By following the LECHSYS formulations on the C.D. for DATA BOX and COLOR TECH
you will never have any compatibility problems between the base colours and the several
binders.
Sometimes, for many reasons, you must make new formulations or correct sample
colours.
In these cases, it is recommended to follow the subsequent guidelines, relevant to the
compatibility of the base colours with the binders.
This table colour caption shows the use of the base colours with the relevant binder:
With NO links for use.
X
X shows the replace ability of the base colour, as shown here below, where
there are economical needs with no technical links of colorimetric durability
(lower colour resistances).
An example:
29010 base colour has a similar tone to 29016
o If you want to obtain a more economical
resistances) 29010 base colour can be
(always check the resulting colour).
29025 base colour has a similar tone to 29023
o If you want to obtain a more economical
resistances) 29025 base colour can be
(always check the resulting colour).
29049 base colour has a similar tone to 29046
o If you want to obtain a more economical
resistances) 29049 base colour can be
(always check the resulting colour).
29054 base colour has a similar tone to 29044
o If you want to obtain a more economical
resistances) 29054 base colour can be
(always check the resulting colour).
product (with lower colour change
replaced with 29016 base colour
product (with lower colour change
replaced with 29023 base colour
product (with lower colour change
replaced with 29046 base colour
product (with lower colour change
replaced with 29044 base colour
Vice versa with 29016-023-046-044 base colours you can operate on the contrary by
increasing the products colour durability by always changing the formulation.
2