Download Untitled

Troubleshooting
The display device displays the focus of the camera.
To save preset of the camera:
1.
Press
(Preset soft key).
2.
Long press any number key (0-9) on the remote control until the screen
prompts ”Preset Key ‘X’ successfully saves, short press it to adjust the camera
direction”, (“X” stands for the saved key).
3.
Current camera position is saved to the key. You can change the position of the
camera to the preset quickly by press the saved key during a call.
To control local camera via the remote control during a video call:
-
Press
or
to adjust the angle of the camera or long press
or
to adjust the
focus of the camera.
-
Long press any number key (0-9) to save the current preset position of the camera.
If preset has been saved to the key, new preset will be saved to the key.
-
Change the position of the camera to the preset by short press the saved key.
To control local camera during a video call via web user interface, at the path Home
(Hover your cursor over the registered account, click
, and then control the camera
in the pop-up window).
To control remote camera via the remote control during a video call:
1.
Press
2.
Press
3.
Select the remote video, and then press
4.
You can do the following:
-
(More soft key) during an active call.
or
Press
to scroll to Near/Far Camera, and then press
or
.
.
to adjust the angle of the remote camera or long press
or
to adjust the focus of the remote camera.
93