Download Martin MiniMAC

REPLACING FUSES
The MiniMAC has 3 fuses. The main fuse is in the mains input socket. The
secondary fuses are on the printed circuit board.
Warning!
Never replace fuses with ones of a different rating!
To replace the main f use
1 Unplug the mains cable from the input socket. Pry open the fuse holder and remove
the fuse.
2 Replace the fuse with one of the same type. The fuse rating is listed on serial number
label and in the specifications.
To replace secondary f uses
1 Disconnect the fixture from power.
2 Remove the 4 base cover bolts with a 4 mm Allen wrench. Move the cover without
disconnecting wires.
3 Pry out the defective fuse and replace it with one of the same rating.
4 Replace the cover before applying power.
36
Basic service